R. Yahaya

Bio: R. Yahaya is an academic researcher from Universiti Putra Malaysia. The author has contributed to research in topics: Epoxy & Kevlar. The author has an hindex of 13, co-authored 24 publications receiving 749 citations. Previous affiliations of R. Yahaya include Government of Malaysia.

Mechanical performance of woven kenaf-Kevlar hybrid composites

Abstract: Hybrid composites offer a combination of advantages of constituent components to produce a material with determined properties. In the present work, woven hybrid composite was prepared by hand lay-...

Enhanced Thermal and Dynamic Mechanical Properties of Synthetic/Natural Hybrid Composites with Graphene Nanoplateletes

Abstract: The aim of the present research work is to enhance the thermal and dynamic mechanical properties of Kevlar/Cocos nucifera sheath (CS)/epoxy composites with graphene nano platelets (GNP). Laminates were fabricated through the hand lay-up method followed by hot pressing. GNP at different wt.% (0.25, 0.5, and 0.75) were incorporated with epoxy resin through ultra-sonication. Kevlar/CS composites with different weight ratios (100/0, 75/25, 50/50, 25/75, 0/100) were fabricated while maintaining a fiber/matrix weight ratio at 45/55. Thermal degradation and viscoelastic properties were evaluated using thermogravimetric analysys (TGA), differential scanning calorimetric (DSC) analysis, and a dynamic mechanical analyser (DMA). The obtained results revealed that Kevlar/CS (25/75) hybrid composites at 0.75 wt.% of GNP exhibited similar thermal stability compared to Kevlar/epoxy (100/0) composites at 0 wt.% of GNP. It has been corroborated with DSC observation that GNP act as a thermal barrier. However, DMA results showed that the Kevlar/CS (50/50) hybrid composites at 0.75 wt.% of GNP exhibited almost equal viscoelastic properties compared to Kevlar/epoxy (100/0) composites at 0 wt.% GNP due to effective crosslinking, which improves the stress transfer rate. Hence, this research proved that Kevlar can be efficiently (50%) replaced with CS at an optimal GNP loading for structural applications.

Plant fibre based bio-composites: Sustainable and renewable green materials

Abstract: The abundant availability and accessibility of plant fibres are the major reasons for an emerging new interest in sustainable technology. While focusing on the composite materials, the main points to be considered are environment friendliness and light weight, with high specific properties. This century has witnessed remarkable achievements in green technology in the field of materials science through the development of high-performance materials made from natural resources is increasing worldwide. Plant fibres are a kind of renewable resources, which have been renewed by nature and human ingenuity for thousands of years. The greatest challenge in working with plant fibre reinforced composites (PFRCs) is their large variation in properties and characteristics. A PFRCs properties are influenced by a number of variables, including the fibre type, environmental conditions, processing methods, and modification of the fibre. A detailed systematic review on these sustainable and renewable green materials is presented in this paper. The overall characteristics of plant fibres used in bio-composites, including source, type, structure, composition, as well as properties, will be reviewed. Finally, the review will conclude with recent developments and future trends of PFRCs as well as key issues that need to be addressed and resolved.

Impact behaviour of hybrid composites for structural applications: a review

Abstract: Recently published research indicates that natural fibre based polymer composites have limited applications in advanced structural systems due to their low impact performance. However, natural fibres have great potential for reducing the product weight, lowering material cost, and renewability. Hybrid composites made from a combination of natural/synthetic fibres, natural/natural fibres, or synthetic/synthetic fibres are also receiving attention from both researchers and the industry for structural applications owing to the tailored mechanical and impact properties of these materials. The hybridisation process is one of the paramount and more efficient ways to strengthen and improve the performance of composite materials. This review paper examines the impact properties of hybrid composites manufactured with the aim of improving their structural characteristics, and in particular, is focused on the impact resistance and penetration behaviour of hybrid composites reinforced with natural and synthetic fibres as well as their suitability for modern structural applications.

Impact damage resistance of 3D printed continuous fibre reinforced thermoplastic composites using fused deposition modelling

Abstract: Fused deposition modelling (FDM) is a promising additive manufacturing technology and an alternative of conventional processes for the fabrication of fibre reinforced composites due to its ability to build functional parts having complex geometries. Continuous fibre reinforced thermoplastic composites (CFRTPCs) are becoming more significant in industrial applications due to their inherit advantages such as excellent mechanical performance, recycling and potential lightweight structures [1,2]. However, a major concern affecting the efficient use of 3D printed composites is the effect of impact damage on the structural integrity, compared to conventional pre-preg composites. The aim of this study is to evaluate the effect of build orientation, layer thickness and fibre volume content on the impact performance of 3D printed continuous carbon, glass, and Kevlar® fibre reinforced nylon composites, manufactured by FDM technique. Charpy impact tests are carried out to determine impact strength. SEM images of fractured surfaces are examined to assess failure mechanics of the different configurations. It is observed that the effect of layer thickness of nylon samples on the impact performance was different for flat and on-edge samples. Impact strength increases as layer thickness increases in flat samples but, conversely, it decreases in on-edge samples, depicting a more brittle fracture. In addition, the results show that impact strength increases as fibre volume content increases in most cases. Glass fibre reinforced samples exhibits the highest impact strength and carbon fibre reinforced samples the lowest one and similar to nylon performance. Furthermore, on-edge reinforced samples exhibit higher values of impact strength than flat reinforced samples. Finally, the results obtained demonstrate that impact strength exhibited by 3D printed composites are significantly higher than the usual 3D printed thermoplastics and, in some cases, even better than common pre-preg materials.

Recent advances in epoxy resin, natural fiber-reinforced epoxy composites and their applications

Abstract: The versatile characteristic of epoxy and its diversity made it suitable for different industrial applications such as laminated circuit board, electronic component encapsulations, surface coatings, potting, fiber reinforcement, and adhesives. However, the pervasive applications in many high-performance field limited the epoxy use because of their delamination, low impact resistance, inherent brittleness, and fracture toughness behavior. The limitations of epoxy can be overcome by incorporation and modification before their industrial applications. Currently, modified epoxy resins are extensively used in fabrication of natural fiber-reinforced composites and in making its different industrial products because of their superior mechanical, thermal, and electrical properties. Present review article designed to be a comprehensive source of recent literature on epoxy structure, synthesis, modified epoxy, bio-epoxy resin, and its applications. This review article also aims to cover the recent advances in natur...