Rajneesh Bhardwaj

Bio: Rajneesh Bhardwaj is an academic researcher from Indian Institute of Technology Bombay. The author has contributed to research in topics: Wetting & Reynolds number. The author has an hindex of 25, co-authored 115 publications receiving 2644 citations. Previous affiliations of Rajneesh Bhardwaj include Columbia University & Johns Hopkins University.

Self-assembly of colloidal particles from evaporating droplets: role of DLVO interactions and proposition of a phase diagram.

Abstract: The shape of deposits obtained from drying drops containing colloidal particles matters for technologies such as inkjet printing, microelectronics, and bioassay manufacturing. In this work, the formation of deposits during the drying of nanoliter drops containing colloidal particles is investigated experimentally with microscopy and profilometry, and theoretically with an in-house finite-element code. The system studied involves aqueous drops containing titania nanoparticles evaporating on a glass substrate. Deposit shapes from spotted drops at different pH values are measured using a laser profilometer. Our results show that the pH of the solution influences the dried deposit pattern, which can be ring-like or more uniform. The transition between these patterns is explained by considering how DLVO interactions such as the electrostatic and van der Waals forces modify the particle deposition process. Also, a phase diagram is proposed to describe how the shape of a colloidal deposit results from the compet...

Self-assembly of colloidal particles from evaporating droplets: role of DLVO interactions and proposition of a phase diagram

Abstract: The shape of deposits obtained from drying drops containing colloidal particles matters for technologies such as inkjet printing, microelectronics and bioassay manufacturing. In this work, the formation of deposits during the drying of nanoliter drops containing colloidal particles is investigated experimentally with microscopy and profilometry, and theoretically with an inhouse finite-element code. The system studied involves aqueous drops containing titania nanoparticles evaporating on a glass substrate. Deposit shapes from spotted drops at different pH values are measured using a laser profilometer. Our results show that the pH of the solution influences the dried deposit pattern, which can be ring-like or more uniform. The transition between these patterns is explained by considering how DLVO interactions such as the electrostatic and van der Waals forces modify the particle deposition process. Also a phase diagram is proposed to describe how the shape of a colloidal deposit results from the competition between three flow patterns: a radial flow driven by evaporation at the wetting line, a Marangoni recirculating flow driven by surface tension gradients, and the transport of particles towards the substrate driven by DLVO interactions. This phase diagram explains three types of deposits commonly observed experimentally, such as a peripheral ring, a small central bump, or a uniform layer. Simulations and experiments are found in very good agreement.

Pattern formation during the evaporation of a colloidal nanoliter drop: a numerical and experimental study

Abstract: An efficient way to precisely pattern particles on solid surfaces is to dispense and evaporate colloidal drops, as for bioassays The dried deposits often exhibit complex structures exemplified by the coffee ring pattern, where most particles have accumulated at the periphery of the deposit In this work, the formation of deposits during the drying of nanoliter colloidal drops on a flat substrate is investigated numerically and experimentally A finite-element numerical model is developed that solves the Navier–Stokes, heat and mass transport equations in a Lagrangian framework The diffusion of vapor in the atmosphere is solved numerically, providing an exact boundary condition for the evaporative flux at the droplet–air interface Laplace stresses and thermal Marangoni stresses are accounted for The particle concentration is tracked by solving a continuum advection–diffusion equation Wetting line motion and the interaction of the free surface of the drop with the growing deposit are modeled based on criteria on wetting angles Numerical results for evaporation times and flow field are in very good agreement with published experimental and theoretical results We also performed transient visualization experiments of water and isopropanol drops loaded with polystyrene microspheres evaporating on glass and polydimethylsiloxane substrates, respectively Measured evaporation times, deposit shapes and sizes and flow fields are in very good agreement with the numerical results Different flow patterns caused by the competition of Marangoni loops and radial flow are shown to determine the deposit shape to be either a ring-like pattern or a homogeneous bump

Likelihood of survival of coronavirus in a respiratory droplet deposited on a solid surface

Abstract: We predict and analyze the drying time of respiratory droplets from a COVID-19 infected subject, which is a crucial time to infect another subject. Drying of the droplet is predicted by using a diffusion-limited evaporation model for a sessile droplet placed on a partially wetted surface with a pinned contact line. The variation in droplet volume, contact angle, ambient temperature, and humidity are considered. We analyze the chances of the survival of the virus present in the droplet based on the lifetime of the droplets under several conditions and find that the chances of the survival of the virus are strongly affected by each of these parameters. The magnitude of shear stress inside the droplet computed using the model is not large enough to obliterate the virus. We also explore the relationship between the drying time of a droplet and the growth rate of the spread of COVID-19 in five different cities and find that they are weakly correlated.

Effects of Substrate Heating and Wettability on Evaporation Dynamics and Deposition Patterns for a Sessile Water Droplet Containing Colloidal Particles.

Abstract: Effects of substrate temperature, substrate wettability, and particle concentration are experimentally investigated for evaporation of a sessile water droplet containing colloidal particles. Time-varying droplet shapes and temperature of the liquid–gas interface are measured using high-speed visualization and infrared thermography, respectively. The motion of the particles inside the evaporating droplet is qualitatively visualized by an optical microscope and the profile of the final particle deposit is measured by an optical profilometer. On a nonheated hydrophilic substrate, a ring-like deposit forms after the evaporation, as reported extensively in the literature, while on a heated hydrophilic substrate, a thinner ring with an inner deposit is reported in the present work. The latter is attributed to Marangoni convection, and recorded motion of the particles as well as measured temperature gradient across the liquid–gas interface confirms this hypothesis. The thinning of the ring scales with the substr...

A Review of Coronavirus Disease-2019 (COVID-19).

Abstract: There is a new public health crises threatening the world with the emergence and spread of 2019 novel coronavirus (2019-nCoV) or the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The virus originated in bats and was transmitted to humans through yet unknown intermediary animals in Wuhan, Hubei province, China in December 2019. There have been around 96,000 reported cases of coronavirus disease 2019 (COVID-2019) and 3300 reported deaths to date (05/03/2020). The disease is transmitted by inhalation or contact with infected droplets and the incubation period ranges from 2 to 14 d. The symptoms are usually fever, cough, sore throat, breathlessness, fatigue, malaise among others. The disease is mild in most people; in some (usually the elderly and those with comorbidities), it may progress to pneumonia, acute respiratory distress syndrome (ARDS) and multi organ dysfunction. Many people are asymptomatic. The case fatality rate is estimated to range from 2 to 3%. Diagnosis is by demonstration of the virus in respiratory secretions by special molecular tests. Common laboratory findings include normal/ low white cell counts with elevated C-reactive protein (CRP). The computerized tomographic chest scan is usually abnormal even in those with no symptoms or mild disease. Treatment is essentially supportive; role of antiviral agents is yet to be established. Prevention entails home isolation of suspected cases and those with mild illnesses and strict infection control measures at hospitals that include contact and droplet precautions. The virus spreads faster than its two ancestors the SARS-CoV and Middle East respiratory syndrome coronavirus (MERS-CoV), but has lower fatality. The global impact of this new epidemic is yet uncertain.

Introduction to the Finite Element Method

Abstract: This chapter introduces the finite element method (FEM) as a tool for solution of classical electromagnetic problems. Although we discuss the main points in the application of the finite element method to electromagnetic design, including formulation and implementation, those who seek deeper understanding of the finite element method should consult some of the works listed in the bibliography section.

Designing Biomaterials for 3D Printing

Abstract: Three-dimensional (3D) printing is becoming an increasingly common technique to fabricate scaffolds and devices for tissue engineering applications. This is due to the potential of 3D printing to provide patient-specific designs, high structural complexity, rapid on-demand fabrication at a low-cost. One of the major bottlenecks that limits the widespread acceptance of 3D printing in biomanufacturing is the lack of diversity in “biomaterial inks”. Printability of a biomaterial is determined by the printing technique. Although a wide range of biomaterial inks including polymers, ceramics, hydrogels and composites have been developed, the field is still struggling with processing of these materials into self-supporting devices with tunable mechanics, degradation, and bioactivity. This review aims to highlight the past and recent advances in biomaterial ink development and design considerations moving forward. A brief overview of 3D printing technologies focusing on ink design parameters is also included.

Self-assembly of colloidal particles from evaporating droplets: role of DLVO interactions and proposition of a phase diagram.

Abstract: The shape of deposits obtained from drying drops containing colloidal particles matters for technologies such as inkjet printing, microelectronics, and bioassay manufacturing. In this work, the formation of deposits during the drying of nanoliter drops containing colloidal particles is investigated experimentally with microscopy and profilometry, and theoretically with an in-house finite-element code. The system studied involves aqueous drops containing titania nanoparticles evaporating on a glass substrate. Deposit shapes from spotted drops at different pH values are measured using a laser profilometer. Our results show that the pH of the solution influences the dried deposit pattern, which can be ring-like or more uniform. The transition between these patterns is explained by considering how DLVO interactions such as the electrostatic and van der Waals forces modify the particle deposition process. Also, a phase diagram is proposed to describe how the shape of a colloidal deposit results from the compet...