Rajni Nagpal

Bio: Rajni Nagpal is an academic researcher. The author has contributed to research in topics: Dentin & Enamel paint. The author has an hindex of 11, co-authored 30 publications receiving 305 citations.

Dental adhesion: mechanism, techniques and durability.

Abstract: Contemporary dental adhesives show favorable immediate results in terms of bonding effectiveness. However, the durability of resin-dentin bonds is their major problem. It appears that simplification of adhesive techniques is rather detrimental to the long-term stability of resin-tooth interface. The hydrostatic pulpal pressure, the dentinal fluid flow and the increased dentinal wetness in vital dentin can affect the intimate interaction of certain dentin adhesives with dentinal tissue. Bond degradation occurs via water sorption, hydrolysis of ester linkages of methacrylate resins, and activation of endogenous dentin matrix metalloproteinases. The three-step etch-and-rinse adhesives still remain the gold standard in terms of durability. This review discusses the fundamental process of adhesion to enamel and dentin with different adhesive techniques, factors affecting the long-term bonding performance of modern adhesives and addresses the current perspectives for improving bond durability.

Comparison of antimicrobial efficacy of propolis, Morinda citrifolia, Azadirachta indica (Neem) and 5% sodium hypochlorite on Candida albicans biofilm formed on tooth substrate: An in-vitro study.

Abstract: Introduction: Endodontic infections are polymicrobial in nature. Candida albicans is the most common fungus isolated from failed endodontic cases. The constant increase in antibiotic resistant strains and side-effects caused by synthetic drugs has prompted researchers to look for herbal alternatives such as propolis, Morinda citrifolia and Azadirachta indica (Neem) etc., since, the gold standard for irrigation, i.e., sodium hypochlorite has many disadvantages. Materials and Methods: Extracted human mandibular premolars were biomechanically prepared, vertically sectioned, placed in tissue culture wells exposing the root canal surface to C. albicans grown on Sabouraud Dextrose Agar to form a biofilm. At the end of 2 days, all groups were treated with test solutions and control for 10 min and evaluated for Candida growth and number of colony forming units. The readings were subjected to statistical analysis using analysis of variance and post hoc Tukey tests. Results: Sodium hypochlorite and propolis groups exhibited highest antimicrobial efficacy against C. albicans with no statistically significant difference. It was followed by the A. indica (Neem) group. M. citrifolia had limited antifungal action followed by the negative control group of saline. Conclusion: According to the results of this study, propolis can be used as an effective antifungal agent similar to that of sodium hypochlorite, although long-term in vivo studies are warranted.

In vitro bonding effectiveness of self-etch adhesives with different application techniques: A microleakage and scanning electron microscopic study.

Abstract: Aim: To evaluate and compare the microleakage of self-etch adhesives placed under different clinical techniques and to analyze the resin-dentin interfacial ultrastructure under scanning electron microscope (SEM). Materials and Methods: 100 extracted human premolars were divided into two groups for different adhesives (Clearfil S 3 and Xeno III). Class V cavities were prepared. Each group was further divided into four subgroups (n = 10) according to the placement technique of the adhesive, i.e. according to manufacturer's directions (Group 1), with phosphoric acid etching of enamel margins (Group 2), with hydrophobic resin coat application (Group 3), with techniques of both groups 2 and 3 (Group 4). The cavities were restored with composite. Ten samples from each group were subjected to microleakage study. Five samples each of both the adhesives from groups 1 and 3 were used for SEM examination of the micromorphology of the resin-dentin interface. Results: At enamel margins for both the adhesives tested, groups 2 and 4 showed significantly lesser leakage than groups 1 and 3. At dentin margins, groups 3 and 4 depicted significantly reduced leakage than groups 1 and 2 for Xeno III. SEM observation of the resin-dentin interfaces revealed generalized gap and poor resin tag formation in both the adhesives. Xeno III showed better interfacial adaptation when additional hydrophobic resin coat was applied. Conclusions: In enamel, prior phosphoric acid etching reduces microleakage of self-etch adhesives, while in dentin, hydrophobic resin coating over one-step self-etch adhesives decreases the microleakage.

Proanthocyanidin: A natural dentin biomodifier in adhesive dentistry

Abstract: Proanthocyanidin (PA), a plant flavonoid, has recently been used in adhesive and restorative dentistry as a natural collagen cross-linking agent. As the long-term stability of the resin-bonded dentin is still questionable due to hydrolysis of collagen by collagenolytic enzymes, the use of collagen cross-linking agents has been proposed to enhance mechanical properties of dentin matrix and reduce biodegradation rates of collagen. Therefore, this paper discusses the chemistry and properties of PA, its role in stabilizing the bonded interface and enhancing the clinical longevity of adhesive restorations, and also considers various factors related to its incorporation in the bonding protocol.

Effect of carbodiimide on the structural stability of resin/dentin interface.

Abstract: Clinical longevity of composite resin restorations is a significant problem in adhesive dentistry. Most of the current simplified adhesives present good immediate bonding, but the bond strength gradually falls over a period due to biodegradation at the resin-dentin interface. Various strategies have been proposed to improve the durability of resin-dentin bond including the use of matrix metalloproteinases inhibitors and collagen cross-linkers, biomimetic remineralization, ethanol wet bonding, to improve the physical and mechanical properties of the bonding substrate, i.e., dentin. However, all are under preliminary research and without any conclusive evidence. Therefore, this paper addresses the current challenge in dental adhesion, i.e., poor durability of resin-dentin bond and introduces the concept of dentin biomodification as an alternative way for improving the long-term bonding effectiveness of current adhesives to dentin and also provides an overview of a synthetic collagen cross-linking agent carbodiimide (EDC) including its mechanism of action, literature review of studies evaluating EDC, variables associated with its use and its cytotoxicity. Search was performed across the electronic databases (PubMed, Ebsco host, and Google search engine) to identify manuscripts for inclusion, using the keywords: carbodiimide, dentin bonding, durability, resin-dentin interface, and collagen cross-linking. Thirty-five articles were finally included, and the last search was made in February 2016.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview - part II: other clinical applications and complications.

Abstract: Mineral trioxide aggregate (MTA) is a dental material used extensively for vital pulp therapies (VPT), protecting scaffolds during regenerative endodontic procedures, apical barriers in teeth with necrotic pulps and open apices, perforation repairs as well as root canal filling and root-end filling during surgical endodontics. A number of bioactive endodontic cements (BECs) have recently been introduced to the market. Most of these materials have calcium and silicate in their compositions; however, bioactivity is a common property of these cements. These materials include the following: BioAggregate, Biodentine, BioRoot RCS, calcium-enriched mixture cement, Endo-CPM, Endocem, EndoSequence, EndoBinder, EndoSeal MTA, iRoot, MicroMega MTA, MTA Bio, MTA Fillapex, MTA Plus, Neo MTA Plus, Ortho MTA, Quick-Set, Retro MTA, Tech Biosealer, and TheraCal LC. It has been claimed that these materials have properties similar to those of MTA but without the drawbacks. In Part I of this review, the available information on the chemical composition of the materials listed above was reviewed and their applications for VPT was discussed. In this article, the clinical applications of MTA and other BECs will be reviewed for apexification, regenerative endodontics, perforation repair, root canal filling, root-end filling, restorative procedures, periodontal defects and treatment of vertical and horizontal root fractures. In addition, the literature regarding the possible drawbacks of these materials following their clinical applications is reviewed. These drawbacks include their discolouration potential, systemic effects and retreatability following use as a root filling material. Based on selected keywords, all publications were searched regarding the use of MTA as well as BECs for the relevant clinical applications. Numerous publications were found regarding the use of BECs for various endodontic applications. The majority of these investigations compared BECs with MTA. Despite promising results for some materials, the number of publications using BECs for various clinical applications was limited. Furthermore, most studies had several methodological shortcomings and low levels of evidence.

Antibacterial photodynamic therapy: overview of a promising approach to fight antibiotic-resistant bacterial infections.

Abstract: Antibacterial photodynamic therapy (APDT) has drawn increasing attention from the scientific society for its potential to effectively kill multidrug-resistant pathogenic bacteria and for its low tendency to induce drug resistance that bacteria can rapidly develop against traditional antibiotic therapy. The review summarizes the mechanism of action of APDT, the photosensitizers, the barriers to PS localization, the targets, the in vitro-, in vivo-, and clinical evidence, the current developments in terms of treating Gram-positive and Gram-negative bacteria, the limitations, as well as future perspectives. Relevance for patients: A structured overview of all important aspects of APDT is provided in the context of resistant bacterial species. The information presented is relevant and accessible for scientists as well as clinicians, whose joint effort is required to ensure that this technology benefits patients in the post-antibiotic era.

Dentin bonding: can we make it last?

Abstract: In dentin bonding, contemporary dental adhesive systems rely on formation of the hybrid layer, a biocomposite containing dentin collagen and polymerized resin adhesive. They are usually able to create at least reasonable integrity of the hybrid layer with high immediate bond strength. However, loss of dentin-bonded interface integrity and bond strength is commonly seen after aging both in vitro and in vivo. This is due to endogenous collagenolytic enzymes, matrix metalloproteinases, and cysteine cathepsins, responsible for the time-dependent loss of hybrid layer collagen. In addition, the hydrophilic nature of adhesive systems creates problems that lead to suboptimal hybrid layers. These problems include, for example, insufficient resin impregnation of dentin, phase separation, and a low rate of polymerization, all of which may reduce the longevity of the bonded interface. Preservation of the collagen matrix integrity by inhibition of endogenous dentin proteases is key to improving dentin bonding durability. Several approaches to retain the integrity of the hybrid layer and to improve the long-term dentin bond strength have been tested. These include the use of enzyme inhibitors, either separately or as incorporated into the adhesive resins; increase of collagen resistance to enzymatic degradation; and elimination of water from the interface to slow down or eliminate hydrolytic loss of the hybrid layer components. This review looks at the principles, current status, and future of the different techniques designed to prevent the loss of hybrid layer and bond strength.