Ranjan Kumar Basu

Bio: Ranjan Kumar Basu is an academic researcher from University of Calcutta. The author has contributed to research in topics: Langmuir adsorption model & Binary number. The author has an hindex of 12, co-authored 15 publications receiving 321 citations.

Characterization and evaluation of curcumin loaded guar gum/polyhydroxyalkanoates blend films for wound healing applications

Abstract: The present paper explores the ‘in situ’ fabrication of guar gum/polyhydroxyalkanoates-curcumin blend (GPCC) films in view of their increasing applications as wound dressings and antibacterial materials. Curcumin is incorporated to assess its bactericidal activity and to enhance the production and accumulation of the extracellular matrix in the healing process. In order to characterize the nature of the polymer network in the blend, FTIR/ATR spectra analysis and TGA are performed. The results reveal that the rigidity of the guar gum/PHBV blend improves with the increase of PHBV content due to the formation of non-covalent interactions, especially H-bonds, between these molecules. Electron microscopy analyses reveal the homogenecity of the blends and surface roughness of the blended films, favoring cell attachment and cell proliferation compared with the film without curcumin. The anti-microbial study demonstrate that the bactericidal activity is more effective against Gram-positive strains than Gram-negative strains. Results of the in vivo wound healing study in an animal model demonstrates that the developed curcumin loaded guar gum/PHBV blend film shows markedly enhanced wound healing compared to the control one.

Comparative study of adsorptive removal of Cr(VI) ion from aqueous solution in fixed bed column by peanut shell and almond shell using empirical models and ANN

Abstract: Cr(VI) is a toxic water pollutant, which causes cancer and mutation in living organisms. Adsorption has become the most preferred method for removal of Cr(VI) due to its high efficiency and low cost. Peanut and almond shells were used as adsorbents in downflow fixed bed continuous column operation for Cr(VI) removal. The experiments were carried out to scrutinise the adsorptive capacity of the peanut shells and almond shells, as well as to find out the effect of various operating parameters such as column bed depth (5–10 cm), influent flow rate (10–22 ml min−1) and influent Cr(VI) concentration (10–20 mg L−1) on the Cr(VI) removal. The fixed bed column operation for Cr(VI) adsorption the equilibrium was illustrated by Langmuir isotherm. Different well-known mathematical models were applied to the experimental data to identify the best-fitted model to explain the bed dynamics. Prediction of the bed dynamics by Yan et al. model was found to be satisfactory. Applicability of artificial neural network (ANN) modelling is also reported. An ANN modelling of multilayer perceptron with gradient descent and Levenberg-Marquardt algorithms have also been tried to predict the percentage removal of Cr(VI). This study indicates that these adsorbents have an excellent potential and are useful for water treatment particularly small- and medium-sized industries of third world countries. Almond shell represents better adsorptive capacity as breakthrough time and exhaustion time are longer in comparison to peanut shell.

Removal of Cr(VI) from Its Aqueous Solution Using Green Adsorbent Pistachio Shell: a Fixed Bed Column Study and GA-ANN Modeling

Abstract: Long-term exposure of Cr(VI) causes severe health effects to the living beings. A continuous fixed bed experimental study is carried out by using pistachio shell as green and eco-friendly adsorbent for Cr(VI) adsorption. Effects of several operating parameters on Cr(VI) removal were investigated using the breakthrough curves ( $$ \frac{C_t}{C_0} $$ versus time) and determination of saturation time ( $$ \frac{C_t}{C_0}\le 1\Big).\kern0.5em $$ Cr(VI) adsorption equilibrium was illustrated by Langmuir isotherm. Different kinetic models like Yan et al. (2001), Thomas (1944), Yoon-Nelson (1984), and Bohart-Adams model(1920) were applied to study the dynamics of the adsorption process.Yan et al. model was found more effective compare to other kinetic models.This studyshowed that the pistachio shells, green adsorbent, have potential adsorption capacity for Cr(VI) ions. Applicability of GA-ANN hybrid model has been tested to predict the percentage removal of Cr(VI).

Cu(II) removal using green adsorbents: kinetic modeling and plant scale-up design

Abstract: Cu(II) adsorption in continuous column using green adsorbents like peanut and almond shell was investigated. Fourier transform infrared (FTIR) spectroscopy, Brunaer-Emmett-Teller (BET) analysis, scanning electron microscopy (SEM), and Point of Zero charge (pHpzc) determination have been used for characterization of the adsorbents. Experiments were conducted at various operating conditions to calculate the adsorption capacity of the adsorbents. Adsorption studies signify that both the adsorbents have good adsorptive capacity for Cu(II) ion. Equilibrium of adsorption was described using Langmuir isotherm and the highest qmax value for both the adsorbent were obtained at an operating condition of 20 ml/min flow rate, 15 mg/L influent Cu(II) concentration, and 7 cm bed depth. Regeneration of both the adsorbents suggests that these adsorbents can be used several times for Cu(II) removal. Seven different kinetic models were tested among which the modified dose response model was fitted well for peanut shell and the Thomas model was fitted well for almond shell. These fitted models were further used for scale-up design. Regeneration studies show that peanut shell and almond shell are useful up to the fifth adsorption cycle. Application of these adsorbents with industrial effluent was also reported. This study reveals that peanut and almond shells can be used for Cu(II) removal for industrial wastewater.

Fixed-bed column adsorption study: a comprehensive review

Abstract: Present paper involved the review of fixed-bed column studies for removal of various contaminants from synthetic wastewater. Basic concept of adsorption, its types (i.e., chemisorption and physisorption) and its mechanism, adsorbents and adsorbates were included. Comparison of batch and column adsorption study is mentioned. Complete study of breakthrough curve for designing adsorptive column is interpreted. This paper explicates the detailed explanation of various process parameters and isotherm models for column study. Fixed-bed adsorption studies using various adsorbates, i.e., metal, ion, dye and other hazardous materials, are reviewed, in which adsorption of chromium metal is most exploitable. Conclusion and some challenges for utilization in real world are also exposed.

Production and applications of activated carbons as adsorbents from olive stones

Abstract: Olive stones have been widely used as a renewable energy biowaste source. As they are rich in elemental carbon (40–45 wt%), much research focussed on effectively converting olive stones, as precursors, into activated carbon adsorbents. However, only a few studies have concentrated on summarising the various techniques used to produce activated carbon from olive stone. This article reviews the research undertaken on the production and application of activated carbon as an adsorbent from olive stones for wastewater treatment. Various physical, chemical and physico-chemical treatments to remove heavy metals, organics and dyes are discussed, and the resultant adsorption capacities are reported. In several cases, very high adsorption capacities are recorded. Finally, the future prospects of these materials as adsorbents are discussed, and after further development work, olive stone-derived activated carbons have great potential especially in the area of organic polluted wastewaters.

Water-Lean Solvents for Post-Combustion CO2 Capture: Fundamentals, Uncertainties, Opportunities, and Outlook

Abstract: This review is designed to foster the discussion regarding the viability of postcombustion CO2 capture by water-lean solvents, by separating fact from fiction for both skeptics and advocates. We highlight the unique physical and thermodynamic properties of notable water-lean solvents, with a discussion of how such properties could translate to efficiency gains compared to aqueous amines. The scope of this review ranges from the purely fundamental molecular-level processes that govern solvent behavior to bench-scale testing, through process engineering and projections of process performance and cost. Key discussions of higher than expected CO2 mass transfer, water tolerance, and compatibility with current infrastructure are presented along with current limitations and suggested areas where further solvent development is needed. We conclude with an outlook of the status of the field and assess the viability of water-lean solvents for postcombustion CO2 capture.

Conductive Biomaterials as Bioactive Wound Dressing for Wound Healing and Skin Tissue Engineering.

Abstract: Conductive biomaterials based on conductive polymers, carbon nanomaterials, or conductive inorganic nanomaterials demonstrate great potential in wound healing and skin tissue engineering, owing to the similar conductivity to human skin, good antioxidant and antibacterial activities, electrically controlled drug delivery, and photothermal effect. However, a review highlights the design and application of conductive biomaterials for wound healing and skin tissue engineering is lacking. In this review, the design and fabrication methods of conductive biomaterials with various structural forms including film, nanofiber, membrane, hydrogel, sponge, foam, and acellular dermal matrix for applications in wound healing and skin tissue engineering and the corresponding mechanism in promoting the healing process were summarized. The approaches that conductive biomaterials realize their great value in healing wounds via three main strategies (electrotherapy, wound dressing, and wound assessment) were reviewed. The application of conductive biomaterials as wound dressing when facing different wounds including acute wound and chronic wound (infected wound and diabetic wound) and for wound monitoring is discussed in detail. The challenges and perspectives in designing and developing multifunctional conductive biomaterials are proposed as well. Highlights: 1 The design and application of conductive biomaterials for wound healing are comprehensively reviewed, including versatile conductive agents, the various forms of conductive wound dressings, and different in vivo applications.2 Three main strategies of which conductive biomaterials realizing their applications in wound healing and skin tissue engineering are discussed.3 The challenges and perspectives in designing multifunctional conductive biomaterials and further clinical translation are proposed.