Rashid Zia

Bio: Rashid Zia is an academic researcher from Brown University. The author has contributed to research in topics: Magnetic dipole & Light emission. The author has an hindex of 27, co-authored 58 publications receiving 4180 citations. Previous affiliations of Rashid Zia include University of Burgundy & Stanford University.

Geometries and materials for subwavelength surface plasmon modes.

Abstract: Plasmonic waveguides can guide light along metal-dielectric interfaces with propagating wave vectors of greater magnitude than are available in free space and hence with propagating wavelengths shorter than those in vacuum. This is a necessary, rather than sufficient, condition for subwavelength confinement of the optical mode. By use of the reflection pole method, the two-dimensional modal solutions for single planar waveguides as well as adjacent waveguide systems are solved. We demonstrate that, to achieve subwavelength pitches, a metal-insulator-metal geometry is required with higher confinement factors and smaller spatial extent than conventional insulator-metal-insulator structures. The resulting trade-off between propagation and confinement for surface plasmons is discussed, and optimization by materials selection is described.

Dielectric metamaterials based on electric and magnetic resonances of silicon carbide particles.

Abstract: Silicon carbide particles exhibit both electric and magnetic optical resonances, allowing unexplored dielectric metamaterial designs. Experimental extinction spectra and Mie theory calculations of single microscale rod-shaped particles reveal three observable midinfrared resonant modes. Two of the modes are degenerate, with a frequency that can be tuned according to a resonance condition derived within the Letter. The existence of both electric and magnetic resonances may enable a novel negative refractive index metamaterial design.

Orientation of luminescent excitons in layered nanomaterials

Abstract: In nanomaterials, optical anisotropies reveal a fundamental relationship between structural and optical properties. Directional optical properties can be exploited to enhance the performance of optoelectronic devices, optomechanical actuators and metamaterials. In layered materials, optical anisotropies may result from in-plane and out-of-plane dipoles associated with intra- and interlayer excitations, respectively. Here, we resolve the orientation of luminescent excitons and isolate photoluminescence signatures arising from distinct intra- and interlayer optical transitions. Combining analytical calculations with energy- and momentum-resolved spectroscopy, we distinguish between in-plane and out-of-plane oriented excitons in materials with weak or strong interlayer coupling-MoS₂ and 3,4,9,10-perylene tetracarboxylic dianhydride (PTCDA), respectively. We demonstrate that photoluminescence from MoS₂ mono-, bi- and trilayers originates solely from in-plane excitons, whereas PTCDA supports distinct in-plane and out-of-plane exciton species with different spectra, dipole strengths and temporal dynamics. The insights provided by this work are important for understanding fundamental excitonic properties in nanomaterials and designing optical systems that efficiently excite and collect light from exciton species with different orientations.

Leaky and bound modes of surface plasmon waveguides

Abstract: While theoretical studies of finite width plasmonic waveguides have focused on the bound modal solutions of metallic structures in homogeneous or near-homogeneous dielectric matrices, experimental studies have mainly probed the leaky surface plasmon modes along the air-exposed surfaces of metallic stripes on glass substrates Combining a full-vectorial, magnetic field finite-difference method with complex coordinate stretching perfectly matched layer boundary conditions, we have solved for both the leaky and bound modes of metallic slab and stripe waveguides Solutions for the leaky modes excited via attenuated total reflection in the Kretschmann configuration provide added insight into the results of recent near and far-field experimental studies For these cases, an analytical approximation for the number of allowed modes as a function of waveguide width is derived based upon the guidance condition of dielectric waveguide theory Then, consistent with a ray optics interpretation for surface plasmon-polariton propagation, a direct comparison is made between our simulations and published results with regard to field profiles and propagation lengths

Plasmonics for improved photovoltaic devices

Abstract: The emerging field of plasmonics has yielded methods for guiding and localizing light at the nanoscale, well below the scale of the wavelength of light in free space. Now plasmonics researchers are turning their attention to photovoltaics, where design approaches based on plasmonics can be used to improve absorption in photovoltaic devices, permitting a considerable reduction in the physical thickness of solar photovoltaic absorber layers, and yielding new options for solar-cell design. In this review, we survey recent advances at the intersection of plasmonics and photovoltaics and offer an outlook on the future of solar cells based on these principles.

Plasmonics: Fundamentals and Applications

Abstract: Fundamentals of Plasmonics.- Electromagnetics of Metals.- Surface Plasmon Polaritons at Metal / Insulator Interfaces.- Excitation of Surface Plasmon Polaritons at Planar Interfaces.- Imaging Surface Plasmon Polariton Propagation.- Localized Surface Plasmons.- Electromagnetic Surface Modes at Low Frequencies.- Applications.- Plasmon Waveguides.- Transmission of Radiation Through Apertures and Films.- Enhancement of Emissive Processes and Nonlinearities.- Spectroscopy and Sensing.- Metamaterials and Imaging with Surface Plasmon Polaritons.- Concluding Remarks.

Plasmonics beyond the diffraction limit

Abstract: Recent years have seen a rapid expansion of research into nanophotonics based on surface plasmon–polaritons. These electromagnetic waves propagate along metal–dielectric interfaces and can be guided by metallic nanostructures beyond the diffraction limit. This remarkable capability has unique prospects for the design of highly integrated photonic signal-processing systems, nanoresolution optical imaging techniques and sensors. This Review summarizes the basic principles and major achievements of plasmon guiding, and details the current state-of-the-art in subwavelength plasmonic waveguides, passive and active nanoplasmonic components for the generation, manipulation and detection of radiation, and configurations for the nanofocusing of light. Potential future developments and applications of nanophotonic devices and circuits are also discussed, such as in optical signals processing, nanoscale optical devices and near-field microscopy with nanoscale resolution.

Nanomaterials and nanoparticles: Sources and toxicity

Abstract: This review is written with the goal of informing public health concerns related to nanoscience, while raising awareness of nanomaterials toxicity among scientists and manufacturers handling them. We show that humans have always been exposed to nanoparticles and dust from natural sources and human activities, the recent development of industry and combustion-based engine transportation profoundly increasing anthropogenic nanoparticulate pollution. The key to understanding the toxicity of nanoparticles is that their minute size, smaller than cells and cellular organelles, allows them to penetrate these basic biological structures, disrupting their normal function. Among diseases associated with nanoparticles are asthma, bronchitis, lung cancer, neurodegenerative diseases (such as Parkinson`s and Alzheimer`s diseases), Crohn`s disease, colon cancer. Nanoparticles that enter the circulatory system are related to occurrence of arteriosclerosis, and blood clots, arrhythmia, heart diseases, and ultimately cardiac death. We show that possible adverse effects of nanoparticles on human health depend on individual factors such as genetics and existing disease, as well as exposure, and nanoparticle chemistry, size, shape, and agglomeration state. The faster we will understand their causes and mechanisms, the more likely we are to find cures for diseases associated with nanoparticle exposure. We foresee a future with better-informed, and hopefully more cautious manipulation of engineered nanomaterials, as well as the development of laws and policies for safely managing all aspects of nanomaterial manufacturing, industrial and commercial use, and recycling.