scispace - formally typeset
Search or ask a question
Author

Ratan Debnath

Bio: Ratan Debnath is an academic researcher from National Institute of Standards and Technology. The author has contributed to research in topics: Quantum dot & Photovoltaics. The author has an hindex of 26, co-authored 62 publications receiving 6622 citations. Previous affiliations of Ratan Debnath include University of Toronto & Center for Functional Nanomaterials.


Papers
More filters
Journal ArticleDOI
TL;DR: An atomic ligand strategy is established that makes use of monovalent halide anions to enhance electronic transport and successfully passivate surface defects in PbS CQD films that shows up to 6% solar AM1.5G power-conversion efficiency.
Abstract: Colloidal-quantum-dot (CQD) optoelectronics offer a compelling combination of solution processing and spectral tunability through quantum size effects. So far, CQD solar cells have relied on the use of organic ligands to passivate the surface of the semiconductor nanoparticles. Although inorganic metal chalcogenide ligands have led to record electronic transport parameters in CQD films, no photovoltaic device has been reported based on such compounds. Here we establish an atomic ligand strategy that makes use of monovalent halide anions to enhance electronic transport and successfully passivate surface defects in PbS CQD films. Both time-resolved infrared spectroscopy and transient device characterization indicate that the scheme leads to a shallower trap state distribution than the best organic ligands. Solar cells fabricated following this strategy show up to 6% solar AM1.5G power-conversion efficiency. The CQD films are deposited at room temperature and under ambient atmosphere, rendering the process amenable to low-cost, roll-by-roll fabrication.

1,435 citations

Journal ArticleDOI
TL;DR: The density of midgap trap states in CQD solids is quantified and shown to be limited by electron-hole recombination due to these states, and a robust hybrid passivation scheme is developed that can passivate trap sites that are inaccessible to much larger organic ligands.
Abstract: Improved performance in a photovoltaic device made of colloidal quantum dots is achieved through a combination of passivation by halide anions and organic crosslinking.

1,183 citations

Journal ArticleDOI
24 May 2010-ACS Nano
TL;DR: In this article, the Schottky device was optimized and explained in terms of a depletion region driving electron−hole pair separation on the semiconductor side of a junction between an opaque low-work-function metal and a p-type CQD film.
Abstract: Colloidal quantum dot (CQD) photovoltaics combine low-cost solution processability with quantum size-effect tunability to match absorption with the solar spectrum. Rapid recent advances in CQD photovoltaics have led to impressive 3.6% AM1.5 solar power conversion efficiencies. Two distinct device architectures and operating mechanisms have been advanced. The first—the Schottky device—was optimized and explained in terms of a depletion region driving electron−hole pair separation on the semiconductor side of a junction between an opaque low-work-function metal and a p-type CQD film. The second—the excitonic device—employed a CQD layer atop a transparent conductive oxide (TCO) and was explained in terms of diffusive exciton transport via energy transfer followed by exciton separation at the type-II heterointerface between the CQD film and the TCO. Here we fabricate CQD photovoltaic devices on TCOs and show that our devices rely on the establishment of a depletion region for field-driven charge transport and...

837 citations

Journal ArticleDOI
TL;DR: In this paper, a colloidal quantum-dot solar cell with two junctions, each designed to absorb and convert different spectral bands of light within the solar spectrum, is presented.
Abstract: Researchers report a colloidal quantum-dot solar cell that features two junctions, each designed to absorb and convert different spectral bands of light within the solar spectrum. The device offers a power conversion efficiency of 4.2% and an open circuit voltage of 1.06 V.

396 citations

Journal ArticleDOI
27 Jan 2010-ACS Nano
TL;DR: The origins of this orders-of-magnitude improvement in air stability compared to larger PbS dots are explored, and evidence is offered in support of an explanation based on the high rate of oxidation of sulfur-rich surfaces preponderant in highly faceted large-diameter P bS colloidal quantum dots.
Abstract: We report colloidal quantum dot (CQDs) photovoltaics having a approximately 930 nm bandgap. The devices exhibit AM1.5G power conversion efficiencies in excess of 2%. Remarkably, the devices are stable in air under many tens of hours of solar illumination without the need for encapsulation. We explore herein the origins of this orders-of-magnitude improvement in air stability compared to larger PbS dots. We find that small and large dots form dramatically different oxidation products, with small dots forming lead sulfite primarily and large dots, lead sulfate. The lead sulfite produced on small dots results in shallow electron traps that are compatible with excellent device performance; whereas the sulfates formed on large dots lead to deep traps, midgap recombination, and consequent catastrophic loss of performance. We propose and offer evidence in support of an explanation based on the high rate of oxidation of sulfur-rich surfaces preponderant in highly faceted large-diameter PbS colloidal quantum dots.

369 citations


Cited by
More filters
Journal ArticleDOI
02 Nov 2012-Science
TL;DR: A low-cost, solution-processable solar cell, based on a highly crystalline perovskite absorber with intense visible to near-infrared absorptivity, that has a power conversion efficiency of 10.9% in a single-junction device under simulated full sunlight is reported.
Abstract: The energy costs associated with separating tightly bound excitons (photoinduced electron-hole pairs) and extracting free charges from highly disordered low-mobility networks represent fundamental losses for many low-cost photovoltaic technologies. We report a low-cost, solution-processable solar cell, based on a highly crystalline perovskite absorber with intense visible to near-infrared absorptivity, that has a power conversion efficiency of 10.9% in a single-junction device under simulated full sunlight. This "meso-superstructured solar cell" exhibits exceptionally few fundamental energy losses; it can generate open-circuit photovoltages of more than 1.1 volts, despite the relatively narrow absorber band gap of 1.55 electron volts. The functionality arises from the use of mesoporous alumina as an inert scaffold that structures the absorber and forces electrons to reside in and be transported through the perovskite.

9,158 citations

Journal ArticleDOI
TL;DR: In this paper, the authors discussed the steps that have led to this discovery, and the future of this rapidly advancing concept have been considered, and it is likely that the next few years of solar research will advance this technology to the very highest efficiencies while retaining the very lowest cost and embodied energy.
Abstract: Over the last 12 months, we have witnessed an unexpected breakthrough and rapid evolution in the field of emerging photovoltaics, with the realization of highly efficient solid-state hybrid solar cells based on organometal trihalide perovskite absorbers. In this Perspective, the steps that have led to this discovery are discussed, and the future of this rapidly advancing concept have been considered. It is likely that the next few years of solar research will advance this technology to the very highest efficiencies while retaining the very lowest cost and embodied energy. Provided that the stability of the perovskite-based technology can be proven, we will witness the emergence of a contender for ultimately low-cost solar power.

2,506 citations

Journal ArticleDOI
TL;DR: In this paper, the authors summarized the key advantages of using quantum dots as luminophores in light-emitting devices (LEDs) and outlined the operating mechanisms of four types of QD-LEDs.
Abstract: This Review article summarizes the key advantages of using quantum dots (QDs) as luminophores in light-emitting devices (LEDs) and outlines the operating mechanisms of four types of QD-LED. The key scientific and technological challenges facing QD-LED commercialization are identified, together with on-going strategies to overcome these challenges.

2,086 citations

Journal ArticleDOI
TL;DR: The simple mesoscopic CH(3)NH( 3)PbI(3)/TiO(2) heterojunction solar cell shows impressive photovoltaic performance, with short-circuit photocurrent J(sc)= 16.1 mA/cm(2), open-circuits photovvoltage V(oc) = 0.631 V, and a fill factor FF =0.57.
Abstract: We report for the first time on a hole conductor-free mesoscopic methylammonium lead iodide (CH3NH3PbI3) perovskite/TiO2 heterojunction solar cell, produced by deposition of perovskite nanoparticles from a solution of CH3NH3I and PbI2 in γ-butyrolactone on a 400 nm thick film of TiO2 (anatase) nanosheets exposing (001) facets. A gold film was evaporated on top of the CH3NH3PbI3 as a back contact. Importantly, the CH3NH3PbI3 nanoparticles assume here simultaneously the roles of both light harvester and hole conductor, rendering superfluous the use of an additional hole transporting material. The simple mesoscopic CH3NH3PbI3/TiO2 heterojunction solar cell shows impressive photovoltaic performance, with short-circuit photocurrent Jsc= 16.1 mA/cm2, open-circuit photovoltage Voc = 0.631 V, and a fill factor FF = 0.57, corresponding to a light to electric power conversion efficiency (PCE) of 5.5% under standard AM 1.5 solar light of 1000 W/m2 intensity. At a lower light intensity of 100W/m2, a PCE of 7.3% was m...

1,799 citations

Journal ArticleDOI
TL;DR: It is demonstrated that a single thin film of the low-temperature solution-processed organometal trihalide perovskite absorber CH3NH3PbI3-xClx, sandwiched between organic contacts can exhibit devices with power-conversion efficiency of up to 10% on glass substrates and over 6% on flexible polymer substrates.
Abstract: Organometal trihalide perovskite solar cells offer the promise of a low-cost easily manufacturable solar technology, compatible with large-scale low-temperature solution processing. Within 1 year of development, solar-to-electric power-conversion efficiencies have risen to over 15%, and further imminent improvements are expected. Here we show that this technology can be successfully made compatible with electron acceptor and donor materials generally used in organic photovoltaics. We demonstrate that a single thin film of the low-temperature solution-processed organometal trihalide perovskite absorber CH3NH3PbI3-xClx, sandwiched between organic contacts can exhibit devices with power-conversion efficiency of up to 10% on glass substrates and over 6% on flexible polymer substrates. This work represents an important step forward, as it removes most barriers to adoption of the perovskite technology by the organic photovoltaic community, and can thus utilize the extensive existing knowledge of hybrid interfaces for further device improvements and flexible processing platforms.

1,539 citations