The introduction of connected and autonomous vehicles will bring changes to the highway driving environment. Connected vehicle technology provides real-time information about the surrounding traffic condition and the traffic management center’s decisions. Such information is expected to improve drivers’ efficiency, response, and comfort while enhancing safety and mobility. Connected vehicle technology can also further increase efficiency and reliability of autonomous vehicles, though these vehicles could be operated solely with their on-board sensors, without communication. While several studies have examined the possible effects of connected and autonomous vehicles on the driving environment, most of the modeling approaches in the literature do not distinguish between connectivity and automation, leaving many questions unanswered regarding the implications of different contemplated deployment scenarios. There is need for a comprehensive acceleration framework that distinguishes between these two technologies while modeling the new connected environment. This study presents a framework that utilizes different models with technology-appropriate assumptions to simulate different vehicle types with distinct communication capabilities. The stability analysis of the resulting traffic stream behavior using this framework is presented for different market penetration rates of connected and autonomous vehicles. The analysis reveals that connected and autonomous vehicles can improve string stability. Moreover, automation is found to be more effective in preventing shockwave formation and propagation under the model’s assumptions. In addition to stability, the effects of these technologies on throughput are explored, suggesting substantial potential throughput increases under certain penetration scenarios.

Influence of connected and autonomous vehicles on traffic flow stability and throughput

Intelligent vehicle cooperation based on reliable communication systems contributes not only to reducing traffic accidents but also to improving traffic flow. Adaptive cruise control (ACC) systems can gain enhanced performance by adding vehicle-vehicle wireless communication to provide additional information to augment range sensor data, leading to cooperative ACC (CACC). This paper presents the design, development, implementation, and testing of a CACC system. It consists of two controllers, one to manage the approaching maneuver to the leading vehicle and the other to regulate car-following once the vehicle joins the platoon. The system has been implemented on four production Infiniti M56s vehicles, and this paper details the results of experiments to validate the performance of the controller and its improvements with respect to the commercially available ACC system.

/pdf/cooperative-adaptive-cruise-control-in-real-traffic-35mggeon75.pdf

Cooperative Adaptive Cruise Control in Real Traffic Situations

Nowadays, throughput has become a limiting factor in road transport. An effective means to increase the road throughput is to employ a small intervehicle time gap using automatic vehicle-following control systems. String stability, i.e., the disturbance attenuation along the vehicle string, is considered an essential requirement for the design of those systems. However, the formal notion of string stability is not unambiguous in literature, since both stability and performance interpretations exist. Therefore, a novel definition for string stability of nonlinear cascaded systems is proposed, using input-output properties. This definition is shown to result in well-known string stability conditions for linear cascaded systems. The theoretical results are experimentally validated using a platoon of six passenger vehicles equipped with cooperative adaptive cruise control.

/pdf/lp-string-stability-of-cascaded-systems-application-to-2qer765sh8.pdf

Lp String Stability of Cascaded Systems: Application to Vehicle Platooning

In addition to decentralized controllers, the information flow among vehicles can significantly affect the dynamics of a platoon. This paper studies the influence of information flow topology on the internal stability and scalability of homogeneous vehicular platoons moving in a rigid formation. A linearized vehicle longitudinal dynamic model is derived using the exact feedback linearization technique, which accommodates the inertial delay of powertrain dynamics. Directed graphs are adopted to describe different types of allowable information flow interconnecting vehicles, including both radar-based sensors and vehicle-to-vehicle (V2V) communications. Under linear feedback controllers, a unified internal stability theorem is proved by using the algebraic graph theory and Routh–Hurwitz stability criterion. The theorem explicitly establishes the stabilizing thresholds of linear controller gains for platoons, under a large class of different information flow topologies. Using matrix eigenvalue analysis, the scalability is investigated for platoons under two typical information flow topologies, i.e., 1) the stability margin of platoon decays to zero as $0(\mbox{1}/N^{2})$ for bidirectional topology; and 2) the stability margin is always bounded and independent of the platoon size for bidirectional-leader topology. Numerical simulations are used to illustrate the results.

/pdf/stability-and-scalability-of-homogeneous-vehicular-platoon-1ftgak0w3g.pdf

Stability and Scalability of Homogeneous Vehicular Platoon: Study on the Influence of Information Flow Topologies

Vehicles on the road with some common interests can cooperatively form a platoon-based driving pattern, in which a vehicle follows another vehicle and maintains a small and nearly constant distance to the preceding vehicle. It has been proved that, compared with driving individually, such a platoon-based driving pattern can significantly improve road capacity and energy efficiency. Moreover, with the emerging vehicular ad hoc network (VANET), the performance of a platoon in terms of road capacity, safety, energy efficiency, etc., can be further improved. On the other hand, the physical dynamics of vehicles inside the platoon can also affect the performance of a VANET. Such a complex system can be considered a platoon-based vehicular cyber-physical system (VCPS), which has attracted significant attention recently. In this paper, we present a comprehensive survey on a platoon-based VCPS. We first review the related work of a platoon-based VCPS. We then introduce two elementary techniques involved in a platoon-based VCPS, i.e., the vehicular networking architecture and standards, and traffic dynamics, respectively. We further discuss the fundamental issues in a platoon-based VCPS, including vehicle platooning/clustering, cooperative adaptive cruise control, platoon-based vehicular communications, etc., all of which are characterized by the tightly coupled relationship between traffic dynamics and VANET behaviors. Since system verification is critical to VCPS development, we also give an overview of VCPS simulation tools. Finally, we share our view on some open issues that may lead to new research directions.

/pdf/a-survey-on-platoon-based-vehicular-cyber-physical-systems-4izr6vl5m8.pdf

A Survey on Platoon-Based Vehicular Cyber-Physical Systems

The design of a cooperative adaptive cruise-control (CACC) system and its practical validation are presented. Focusing on the feasibility of implementation, a decentralized controller design with a limited communication structure is proposed (in this case, a wireless communication link with the nearest preceding vehicle only). A necessary and sufficient frequency-domain condition for string stability is derived, taking into account heterogeneous traffic, i.e., vehicles with possibly different characteristics. For a velocity-dependent intervehicle spacing policy, it is shown that the wireless communication link enables driving at small intervehicle distances, whereas string stability is guaranteed. For a constant velocity-independent intervehicle spacing, string stability cannot be guaranteed. To validate the theoretical results, experiments are performed with two CACC-equipped vehicles. Implementation of the CACC system, the string-stability characteristics of the practical setup, and experimental results are discussed, indicating the advantages of the design over standard adaptive-cruise-control functionality.

String-Stable CACC Design and Experimental Validation: A Frequency-Domain Approach

The design of a CACC system and corresponding experiments are presented. The design targets string stable system behavior, which is assessed using a frequency-domain-based approach. Following this approach, it is shown that the available wireless information enables small inter-vehicle distances, while maintaining string stable behavior. The theoretical results are validated by experiments with two CACC-equipped vehicles. Measurement results showing string stable as well as string unstable behavior are discussed.

/pdf/cooperative-adaptive-cruise-control-design-and-experiments-tyv5vxv9br.pdf

René P A Vugts

Papers

String-Stable CACC Design and Experimental Validation: A Frequency-Domain Approach

Cooperative adaptive cruise control, design and experiments