Rengui Li

Bio: Rengui Li is an academic researcher from Dalian Institute of Chemical Physics. The author has contributed to research in topics: Photocatalysis & Water splitting. The author has an hindex of 31, co-authored 61 publications receiving 4405 citations. Previous affiliations of Rengui Li include Chinese Academy of Sciences & California Institute of Technology.

Spatial separation of photogenerated electrons and holes among {010} and {110} crystal facets of BiVO4

Abstract: Charge separation is crucial for increasing the activity of semiconductor-based photocatalysts, especially in water splitting reactions. Here we show, using monoclinic bismuth vanadate crystal as a model photocatalyst, that efficient charge separation can be achieved on different crystal facets, as evidenced by the reduction reaction with photogenerated electrons and oxidation reaction with photogenerated holes, which take place separately on the {010} and {110} facets under photo-irradiation. Based on this finding, the reduction and oxidation cocatalysts are selectively deposited on the {010} and {110} facets respectively, resulting in much higher activity in both photocatalytic and photoelectrocatalytic water oxidation reactions, compared with the photocatalyst with randomly distributed cocatalysts. These results show that the photogenrated electrons and holes can be separated between the different facets of semiconductor crystals. This finding may be useful in semiconductor physics and chemistry to construct highly efficient solar energy conversion systems.

Highly efficient photocatalysts constructed by rational assembly of dual-cocatalysts separately on different facets of BiVO4

Abstract: Cocatalysts play important roles in promoting the catalytic reactions of semiconductor photocatalysts. Especially, deposition of dual cocatalysts, i.e., oxidation and reduction cocatalysts, onto a semiconductor photocatalyst can significantly improve its photocatalytic activity due to the synergetic effect of rapid consumption of photogenerated electrons and holes. However, in most cases, the cocatalysts are randomly deposited onto the semiconductor photocatalysts, where the cocatalysts cannot function fully. Herein, based on the findings that photogenerated electrons and holes can be spatially separated onto the different facets of BiVO4, we have successfully prepared two types of photocatalysts (M/MnOx/BiVO4 and M/Co3O4/BiVO4, where M stands for noble metals) with reduction and oxidation cocatalysts selectively deposited onto the {010} and {110} facets of BiVO4 by a photo-deposition method. Remarkably enhanced photocatalytic activities were observed for such assembled photocatalysts in control experiments of photocatalytic water oxidation and photocatalytic degradation of methyl orange and rhodamine B. In-depth investigations show that the enhanced photocatalytic performances are due to not only the intrinsic nature of charge separation between the {010} and {110} facets of BiVO4, but also the synergetic effect of dual-cocatalysts deposited onto the different facets of BiVO4. This work further proves the feasibility of the general concepts for approaching efficient artificial photosynthesis systems, namely, engineering of crystal-based photocatalysts by selective deposition of suitable reduction and oxidation cocatalysts onto the different facets of light absorbing semiconductor crystals.

Photocatalytic Water Oxidation on BiVO4 with the Electrocatalyst as an Oxidation Cocatalyst: Essential Relations between Electrocatalyst and Photocatalyst

Abstract: The oxygen evolution is kinetically the key step in the photocatalytic water splitting. Cocatalysts could lower the activation potential for O2 evolution. However, the cocatalyst for O2 evolution has been less investigated, and few effective cocatalysts were reported. This paper reports that the O2 evolution rate of photocatalytic water splitting under visible light irradiation can be significantly enhanced when the electrocatalyst cobalt–phosphate (denoted as CoPi) was deposited on BiVO4. The photocurrent density is also greatly enhanced by loading CoPi on BiVO4 electrode, and this enhancement in performance shows the similar trend between the photocatalytic activity and photocurrent density. We also found that this tendency is true for BiVO4 loaded with a series of different electrocatalysts as the cocatalysts. These results demonstrate that an effective electrocatalyst of water oxidation can be also an effective cocatalyst for O2 evolution from photocatalytic water oxidation. By depositing the CoPi as ...

Enhancing charge separation on high symmetry SrTiO3 exposed with anisotropic facets for photocatalytic water splitting

Abstract: One of the challenging issues in photocatalytic overall water splitting is to efficiently separate the photogenerated charges and the reduction and oxidation catalytic sites on semiconductor-based photocatalysts. It has been reported that the photogenerated charge can be separated between different facets of a semiconductor crystal with low symmetry. However, many semiconductor crystals possess high symmetry (such as the cubic phase) and expose isotropic facets, which are not suitable for charge separation between the facets. Herein, using a nanocrystal morphology tailoring strategy, we synthesized the exposed facets of high symmetry SrTiO3 nanocrystals from isotropic facets (6-facet SrTiO3) to anisotropic facets (18-facet SrTiO3), which leads to the exposure of different crystal facets. We found that the reduction and oxidation catalytic sites can be separately distributed only on the anisotropic facets of 18-facet SrTiO3 nanocrystals, but randomly distributed on every facet of 6-facet SrTiO3 nanocrystals. Based on these findings, the selective distribution of dual-cocatalysts on the anisotropic facets of 18-facet SrTiO3 nanocrystals leads to a fivefold enhancement of apparent quantum efficiency. The superior performance can be attributed to the charge separation between anisotropic facets and the separation of the reduction and oxidation catalytic sites to reduce the charge recombination. These findings will be instructive for the rational design of a high efficiency photocatalytic system for solar energy conversion.

Achieving overall water splitting using titanium dioxide-based photocatalysts of different phases

Abstract: Titanium dioxide (TiO2) is regarded as the benchmark semiconductor in photocatalysis, which possesses a suitable band structure and makes the overall water splitting reaction thermodynamically possible. However, photocatalytic overall water splitting (POWS) (2H2O → 2H2 + O2) can only take place on rutile but hardly on anatase and brookite TiO2. So obtaining the POWS on TiO2-based photocatalysts has remained a long-standing challenge for over 40 years. In this work, we found that the POWS on anatase and brookite TiO2 becomes feasible under prolonged UV light irradiation. Further investigation by means of electron spin resonance spectroscopy (EPR) and transient infrared absorption–excitation energy scanning spectroscopy (TRIRA-ESS) reveals that both kinetics and thermodynamics factors contributed to unique POWS activity for different phases of TiO2. Kinetically the process of photocatalysis differs on different phases of TiO2 due to the intermediates (˙OH radical for anatase and brookite TiO2, peroxy species for rutile TiO2) that are formed. Thermodynamically there are many trapped states lying near the valence band of anatase and brookite but not for rutile TiO2, which reduce the overpotential for water oxidation. These findings develop our understanding of why some semiconductors are inactive as POWS photocatalysts despite having thermodynamically suitable band structures for the proton reduction and water oxidation reactions.

Graphitic Carbon Nitride (g-C3N4)-Based Photocatalysts for Artificial Photosynthesis and Environmental Remediation: Are We a Step Closer To Achieving Sustainability?

Abstract: As a fascinating conjugated polymer, graphitic carbon nitride (g-C3N4) has become a new research hotspot and drawn broad interdisciplinary attention as a metal-free and visible-light-responsive photocatalyst in the arena of solar energy conversion and environmental remediation. This is due to its appealing electronic band structure, high physicochemical stability, and “earth-abundant” nature. This critical review summarizes a panorama of the latest progress related to the design and construction of pristine g-C3N4 and g-C3N4-based nanocomposites, including (1) nanoarchitecture design of bare g-C3N4, such as hard and soft templating approaches, supramolecular preorganization assembly, exfoliation, and template-free synthesis routes, (2) functionalization of g-C3N4 at an atomic level (elemental doping) and molecular level (copolymerization), and (3) modification of g-C3N4 with well-matched energy levels of another semiconductor or a metal as a cocatalyst to form heterojunction nanostructures. The constructi...

Recent advances in semiconductors for photocatalytic and photoelectrochemical water splitting

Abstract: Photocatalytic and photoelectrochemical water splitting under irradiation by sunlight has received much attention for production of renewable hydrogen from water on a large scale. Many challenges still remain in improving energy conversion efficiency, such as utilizing longer-wavelength photons for hydrogen production, enhancing the reaction efficiency at any given wavelength, and increasing the lifetime of the semiconductor materials. This introductory review covers the fundamental aspects of photocatalytic and photoelectrochemical water splitting. Controlling the semiconducting properties of photocatalysts and photoelectrode materials is the primary concern in developing materials for solar water splitting, because they determine how much photoexcitation occurs in a semiconductor under solar illumination and how many photoexcited carriers reach the surface where water splitting takes place. Given a specific semiconductor material, surface modifications are important not only to activate the semiconductor for water splitting but also to facilitate charge separation and to upgrade the stability of the material under photoexcitation. In addition, reducing resistance loss and forming p-n junction have a significant impact on the efficiency of photoelectrochemical water splitting. Correct evaluation of the photocatalytic and photoelectrochemical activity for water splitting is becoming more important in enabling an accurate comparison of a number of studies based on different systems. In the latter part, recent advances in the water splitting reaction under visible light will be presented with a focus on non-oxide semiconductor materials to give an overview of the various problems and solutions.

Semiconductor heterojunction photocatalysts: design, construction, and photocatalytic performances

Abstract: Semiconductor-mediated photocatalysis has received tremendous attention as it holds great promise to address the worldwide energy and environmental issues. To overcome the serious drawbacks of fast charge recombination and the limited visible-light absorption of semiconductor photocatalysts, many strategies have been developed in the past few decades and the most widely used one is to develop photocatalytic heterojunctions. This review attempts to summarize the recent progress in the rational design and fabrication of heterojunction photocatalysts, such as the semiconductor–semiconductor heterojunction, the semiconductor–metal heterojunction, the semiconductor–carbon heterojunction and the multicomponent heterojunction. The photocatalytic properties of the four junction systems are also discussed in relation to the environmental and energy applications, such as degradation of pollutants, hydrogen generation and photocatalytic disinfection. This tutorial review ends with a summary and some perspectives on the challenges and new directions in this exciting and still emerging area of research.

Generation and Detection of Reactive Oxygen Species in Photocatalysis

Abstract: The detection methods and generation mechanisms of the intrinsic reactive oxygen species (ROS), i.e., superoxide anion radical (•O2–), hydrogen peroxide (H2O2), singlet oxygen (1O2), and hydroxyl radical (•OH) in photocatalysis, were surveyed comprehensively. Consequently, the major photocatalyst used in heterogeneous photocatalytic systems was found to be TiO2. However, besides TiO2 some representative photocatalysts were also involved in the discussion. Among the various issues we focused on the detection methods and generation reactions of ROS in the aqueous suspensions of photocatalysts. On the careful account of the experimental results presented so far, we proposed the following apprehension: adsorbed •OH could be regarded as trapped holes, which are involved in a rapid adsorption–desorption equilibrium at the TiO2–solution interface. Because the equilibrium shifts to the adsorption side, trapped holes must be actually the dominant oxidation species whereas •OH in solution would exert the reactivity...

Roles of cocatalysts in photocatalysis and photoelectrocatalysis.

Abstract: Since the 1970s, splitting water using solar energy has been a focus of great attention as a possible means for converting solar energy to chemical energy in the form of clean and renewable hydrogen fuel. Approaches to solar water splitting include photocatalytic water splitting with homogeneous or heterogeneous photocatalysts, photoelectrochemical or photoelectrocatalytic (PEC) water splitting with a PEC cell, and electrolysis of water with photovoltaic cells coupled to electrocatalysts. Though many materials are capable of photocatalytically producing hydrogen and/or oxygen, the overall energy conversion efficiency is still low and far from practical application. This is mainly due to the fact that the three crucial steps for the water splitting reaction: solar light harvesting, charge separation and transportation, and the catalytic reduction and oxidation reactions, are not efficient enough or simultaneously. Water splitting is a thermodynamically uphill reaction, requiring transfer of multiple electrons, making it one of the most challenging reactions in chemistry. This Account describes the important roles of cocatalysts in photocatalytic and PEC water splitting reactions. For semiconductor-based photocatalytic and PEC systems, we show that loading proper cocatalysts, especially dual cocatalysts for reduction and oxidation, on semiconductors (as light harvesters) can significantly enhance the activities of photocatalytic and PEC water splitting reactions. Loading oxidation and/or reduction cocatalysts on semiconductors can facilitate oxidation and reduction reactions by providing the active sites/reaction sites while suppressing the charge recombination and reverse reactions. In a PEC water splitting system, the water oxidation and reduction reactions occur at opposite electrodes, so cocatalysts loaded on the electrode materials mainly act as active sites/reaction sites spatially separated as natural photosynthesis does. In both cases, the nature of the loaded cocatalysts and their interaction with the semiconductor through the interface/junction are important. The cocatalyst can provide trapping sites for the photogenerated charges and promote the charge separation, thus enhancing the quantum efficiency; the cocatalysts could improve the photostability of the catalysts by timely consuming of the photogenerated charges, particularly the holes; most importantly, the cocatalysts catalyze the reactions by lowering the activation energy. Our research shows that loading suitable dual cocatalysts on semiconductors can significantly increase the photocatalytic activities of hydrogen and oxygen evolution reactions, and even make the overall water splitting reaction possible. All of these findings suggest that dual cocatalysts are necessary for developing highly efficient photocatalysts for water splitting reactions.