Reza Iravani

Bio: Reza Iravani is an academic researcher from University of Toronto. The author has contributed to research in topics: Control theory & Microgrid. The author has an hindex of 51, co-authored 178 publications receiving 12704 citations. Previous affiliations of Reza Iravani include University of Wisconsin-Madison.

Trends in Microgrid Control

Abstract: The increasing interest in integrating intermittent renewable energy sources into microgrids presents major challenges from the viewpoints of reliable operation and control. In this paper, the major issues and challenges in microgrid control are discussed, and a review of state-of-the-art control strategies and trends is presented; a general overview of the main control principles (e.g., droop control, model predictive control, multi-agent systems) is also included. The paper classifies microgrid control strategies into three levels: primary, secondary, and tertiary, where primary and secondary levels are associated with the operation of the microgrid itself, and tertiary level pertains to the coordinated operation of the microgrid and the host grid. Each control level is discussed in detail in view of the relevant existing technical literature.

Microgrids management

Abstract: The environmental and economical benefits of the microgrid and consequently its acceptability and degree of proliferation in the utility power industry, are primarily determined by the envisioned controller capabilities and the operational features. Depending on the type and depth of penetration of distributed energy resource (DER) units, load characteristics and power quality constraints, and market participation strategies, the required control and operational strategies of a microgrid can be significantly, and even conceptually, different than those of the conventional power systems.

Dynamic Performance of a Modular Multilevel Back-to-Back HVDC System

Abstract: The modular multilevel converter (MMC) is a newly introduced switch-mode converter topology with the potential for high-voltage direct current (HVDC) transmission applications. This paper focuses on the dynamic performance of an MMC-based, back-to-back HVDC system. A phase-disposition (PD) sinusoidal pulsewidth modulation (SPWM) strategy, including a voltage balancing method, for the operation of an MMC is presented in this paper. Based on the proposed PD-SPWM switching strategy, a mathematical model for the MMC-HVDC system, under both balanced and unbalanced grid operation modes, is developed. Dynamic performance of the MMC-based back-to-back HVDC converter system, based on time-domain simulation studies in the PSCAD/EMTDC environment, is then evaluated. The reported time-domain simulation results show that based on the adopted PD-SPWM switching strategy, the MMC-HVDC station can respond satisfactorily to the system dynamics and control commands under balanced and unbalanced conditions while maintaining voltage balance of the dc capacitors.

Voltage-Sourced Converters in Power Systems : Modeling, Control, and Applications

Abstract: Presents Fundamentals of Modeling, Analysis, and Control of Electric Power Converters for Power System ApplicationsElectronic (static) power conversion has gained widespread acceptance in power systems applications; electronic power converters are increasingly employed for power conversion and conditioning, compensation, and active filtering. This book presents the fundamentals for analysis and control of a specific class of high-power electronic converters—the three-phase voltage-sourced converter (VSC). Voltage-Sourced Converters in Power Systems provides a necessary and unprecedented link between the principles of operation and the applications of voltage-sourced converters. The book:Describes various functions that the VSC can perform in electric power systemsCovers a wide range of applications of the VSC in electric power systems—including wind power conversion systemsAdopts a systematic approach to the modeling and control design problemsIllustrates the control design procedures and expected performance based on a comprehensive set of examples and digital computer time-domain simulation studiesThis comprehensive text presents effective techniques for mathematical modeling and control design, and helps readers understand the procedures and analysis steps. Detailed simulation case studies are included to highlight the salient points and verify the designs.VoltageSourced Converters in Power Systems is an ideal reference for senior undergraduate and graduate students in power engineering programs, practicing engineers who deal with grid integration and operation of distributed energy resource units, design engineers, and researchers in the area of electric power generation, transmission, distribution, and utilization.

Potential-Function Based Control of a Microgrid in Islanded and Grid-Connected Modes

Abstract: This paper introduces the potential-function based method for secondary (as well as tertiary) control of a microgrid, in both islanded and grid-connected modes. A potential function is defined for each controllable unit of the microgrid such that the minimum of the potential function corresponds to the control goal. The dynamic set points are updated, using communication within the microgrid. The proposed potential function method is applied for the secondary voltage control of two microgrids with single and multiple feeders. Both islanded and grid-connected modes are investigated. The studies are conducted in the time-domain, using the PSCAD/EMTDC software environment. The study results demonstrate feasibility of the proposed potential function method and viability of the secondary voltage control method for a microgrid.

Recent Advances and Industrial Applications of Multilevel Converters

Abstract: Multilevel converters have been under research and development for more than three decades and have found successful industrial application. However, this is still a technology under development, and many new contributions and new commercial topologies have been reported in the last few years. The aim of this paper is to group and review these recent contributions, in order to establish the current state of the art and trends of the technology, to provide readers with a comprehensive and insightful review of where multilevel converter technology stands and is heading. This paper first presents a brief overview of well-established multilevel converters strongly oriented to their current state in industrial applications to then center the discussion on the new converters that have made their way into the industry. In addition, new promising topologies are discussed. Recent advances made in modulation and control of multilevel converters are also addressed. A great part of this paper is devoted to show nontraditional applications powered by multilevel converters and how multilevel converters are becoming an enabling technology in many industrial sectors. Finally, some future trends and challenges in the further development of this technology are discussed to motivate future contributions that address open problems and explore new possibilities.

Control of Power Converters in AC Microgrids

Abstract: The enabling of ac microgrids in distribution networks allows delivering distributed power and providing grid support services during regular operation of the grid, as well as powering isolated islands in case of faults and contingencies, thus increasing the performance and reliability of the electrical system. The high penetration of distributed generators, linked to the grid through highly controllable power processors based on power electronics, together with the incorporation of electrical energy storage systems, communication technologies, and controllable loads, opens new horizons to the effective expansion of microgrid applications integrated into electrical power systems. This paper carries out an overview about microgrid structures and control techniques at different hierarchical levels. At the power converter level, a detailed analysis of the main operation modes and control structures for power converters belonging to microgrids is carried out, focusing mainly on grid-forming, grid-feeding, and grid-supporting configurations. This analysis is extended as well toward the hierarchical control scheme of microgrids, which, based on the primary, secondary, and tertiary control layer division, is devoted to minimize the operation cost, coordinating support services, meanwhile maximizing the reliability and the controllability of microgrids. Finally, the main grid services that microgrids can offer to the main network, as well as the future trends in the development of their operation and control for the next future, are presented and discussed.

Trends in Microgrid Control

Abstract: The increasing interest in integrating intermittent renewable energy sources into microgrids presents major challenges from the viewpoints of reliable operation and control. In this paper, the major issues and challenges in microgrid control are discussed, and a review of state-of-the-art control strategies and trends is presented; a general overview of the main control principles (e.g., droop control, model predictive control, multi-agent systems) is also included. The paper classifies microgrid control strategies into three levels: primary, secondary, and tertiary, where primary and secondary levels are associated with the operation of the microgrid itself, and tertiary level pertains to the coordinated operation of the microgrid and the host grid. Each control level is discussed in detail in view of the relevant existing technical literature.

VSC-Based HVDC Power Transmission Systems: An Overview

Abstract: The ever increasing progress of high-voltage high-power fully controlled semiconductor technology continues to have a significant impact on the development of advanced power electronic apparatus used to support optimized operations and efficient management of electrical grids, which, in many cases, are fully or partially deregulated networks. Developments advance both the HVDC power transmission and the flexible ac transmission system technologies. In this paper, an overview of the recent advances in the area of voltage-source converter (VSC) HVdc technology is provided. Selected key multilevel converter topologies are presented. Control and modeling methods are discussed. A list of VSC-based HVdc installations worldwide is included. It is confirmed that the continuous development of power electronics presents cost-effective opportunities for the utilities to exploit, and HVdc remains a key technology. In particular, VSC-HVdc can address not only conventional network issues such as bulk power transmission, asynchronous network interconnections, back-to-back ac system linking, and voltage/stability support to mention a few, but also niche markets such as the integration of large-scale renewable energy sources with the grid and most recently large onshore/offshore wind farms.

Operation, Control, and Applications of the Modular Multilevel Converter: A Review

Abstract: The modular multilevel converter (MMC) has been a subject of increasing importance for medium/high-power energy conversion systems. Over the past few years, significant research has been done to address the technical challenges associated with the operation and control of the MMC. In this paper, a general overview of the basics of operation of the MMC along with its control challenges are discussed, and a review of state-of-the-art control strategies and trends is presented. Finally, the applications of the MMC and their challenges are highlighted.