Richard F. Haglund

Bio: Richard F. Haglund is an academic researcher from Vanderbilt University. The author has contributed to research in topics: Laser & Laser ablation. The author has an hindex of 32, co-authored 72 publications receiving 6366 citations. Previous affiliations of Richard F. Haglund include W. M. Keck Foundation & Oak Ridge National Laboratory.

Bandgap engineering of strained monolayer and bilayer MoS2.

Abstract: We report the influence of uniaxial tensile mechanical strain in the range 0–2.2% on the phonon spectra and bandstructures of monolayer and bilayer molybdenum disulfide (MoS2) two-dimensional crystals. First, we employ Raman spectroscopy to observe phonon softening with increased strain, breaking the degeneracy in the E′ Raman mode of MoS2, and extract a Gruneisen parameter of ∼1.06. Second, using photoluminescence spectroscopy we measure a decrease in the optical band gap of MoS2 that is approximately linear with strain, ∼45 meV/% strain for monolayer MoS2 and ∼120 meV/% strain for bilayer MoS2. Third, we observe a pronounced strain-induced decrease in the photoluminescence intensity of monolayer MoS2 that is indicative of the direct-to-indirect transition of the character of the optical band gap of this material at applied strain of ∼1%. These observations constitute a demonstration of strain engineering the band structure in the emergent class of two-dimensional crystals, transition-metal dichalcogenides.

Laser ablation and desorption

Abstract: Introduction to laser desorption and ablation, J.C. Miller mechanisms of laser ablation, R.F. Haglund low fluence laser desorption and plume formation from wide bandgap crystalline materials, J.T. Dickinson lasers, optics and thermal considerations in ablation experiments, C. Grigoropoulos gas dynamics and the characterization S. Schleberger, S. Speller and W. Heiland surface modification with lasers, Z. Ball and R. Sauerbrey chemical analysis by laser ablation, R.E. Russo matrix-assisted laser desorption and ionization, J.A Carroll and R.C. Beavis phyiscal mechanisms governing the ablation of biological tissue, G. Edwards growth and doping of compound semiconductor films by pulsed laser ablation, D.H. Lowndes laser ablation in optical components and thin films, M. Reichling industrial applications of laser ablation, R.F. Haglund.

Bandgap Engineering of Strained Monolayer and Bilayer MoS2

Abstract: We report the influence of uniaxial tensile mechanical strain in the range 0-2.2% on the phonon spectra and bandstructures of monolayer and bilayer molybdenum disulfide (MoS2) two-dimensional crystals. First, we employ Raman spectroscopy to observe phonon softening with increased strain, breaking the degeneracy in the E' Raman mode of MoS2, and extract a Gruneisen parameter of ~1.06. Second, using photoluminescence spectroscopy we measure a decrease in the optical band gap of MoS2 that is roughly linear with strain, ~45 meV% strain for monolayer MoS2 and ~120 meV% strain for bilayer MoS2. Third, we observe a pronounced strain-induced decrease in the photoluminescence intensity of monolayer MoS2 that is indicative of the direct-to-indirect transition of the character of the optical band gap of this material at applied strain of ~1.5%, a value supported by first-principles calculations that include excitonic effects. These observations constitute the first demonstration of strain engineering the band structure in the emergent class of two-dimensional crystals, transition-metal dichalcogenides.

Semiconductor to metal phase transition in the nucleation and growth of VO2 nanoparticles and thin films

Abstract: The optical and morphological characteristics of vanadium dioxide nanoparticles and thin films during their nucleation and growth phases have been studied by correlating the temperature and sharpness of the transition with the processing parameters. Thermal annealing results in grain growth and improved crystallinity. Normally, larger crystallites show smaller hysteresis, as there is a greater probability of finding a nucleating defect in the larger volume. But at the same time, this improved crystal perfection, which accompanies the thermal annealing and grain growth, tends to a larger hysteresis, as there are fewer nucleating defects within the volume. We show that the width and shape of the hysteresis cycle are thus determined by the competing effects of crystallinity and grain size.

Synthesis of vanadium dioxide thin films and nanoparticles

Abstract: Thin-film materials with 'smart' properties that react to temperature variations, electric or magnetic fields, and/or pressure variations have recently attracted a great deal of attention. Vanadium dioxide (VO2) belongs to this family of 'smart materials' because it exhibits a semiconductor-to-metal first-order phase transition near 340 K, accompanied by an abrupt change in its resistivity and near-infrared transmission. It is also of great interest in condensed-matter physics because it is a classic strongly correlated electron system. In order to integrate vanadium dioxide into microelectronic circuits, thin-film growth of VO2 has been studied extensively, and studies of VO2 nanoparticles have shown that the phase transition is size-dependent. This paper presents a broad overview of the growth techniques that have been used to produce thin films and nanoparticles of VO2, including chemical vapor deposition, sol–gel synthesis, sputter deposition and pulsed laser deposition. Representative deposition techniques are described, and typical thin-film characteristics are presented, with an emphasis on recent results obtained using pulsed laser deposition. The opportunities for growing epitaxial films of VO2, and for doping VO2 films to alter their transition temperature and switching characteristics, are also discussed.

2D transition metal dichalcogenides

Abstract: Graphene is very popular because of its many fascinating properties, but its lack of an electronic bandgap has stimulated the search for 2D materials with semiconducting character. Transition metal dichalcogenides (TMDCs), which are semiconductors of the type MX2, where M is a transition metal atom (such as Mo or W) and X is a chalcogen atom (such as S, Se or Te), provide a promising alternative. Because of its robustness, MoS2 is the most studied material in this family. TMDCs exhibit a unique combination of atomic-scale thickness, direct bandgap, strong spin–orbit coupling and favourable electronic and mechanical properties, which make them interesting for fundamental studies and for applications in high-end electronics, spintronics, optoelectronics, energy harvesting, flexible electronics, DNA sequencing and personalized medicine. In this Review, the methods used to synthesize TMDCs are examined and their properties are discussed, with particular attention to their charge density wave, superconductive and topological phases. The use of TMCDs in nanoelectronic devices is also explored, along with strategies to improve charge carrier mobility, high frequency operation and the use of strain engineering to tailor their properties. Two-dimensional transition metal dichalcogenides (TMDCs) exhibit attractive electronic and mechanical properties. In this Review, the charge density wave, superconductive and topological phases of TMCDs are discussed, along with their synthesis and applications in devices with enhanced mobility and with the use of strain engineering to improve their properties.

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

Plasmon-induced hot carrier science and technology

Abstract: The discovery of the photoelectric effect by Heinrich Hertz in 1887 set the foundation for over 125 years of hot carrier science and technology. In the early 1900s it played a critical role in the development of quantum mechanics, but even today the unique properties of these energetic, hot carriers offer new and exciting opportunities for fundamental research and applications. Measurement of the kinetic energy and momentum of photoejected hot electrons can provide valuable information on the electronic structure of materials. The heat generated by hot carriers can be harvested to drive a wide range of physical and chemical processes. Their kinetic energy can be used to harvest solar energy or create sensitive photodetectors and spectrometers. Photoejected charges can also be used to electrically dope two-dimensional materials. Plasmon excitations in metallic nanostructures can be engineered to enhance and provide valuable control over the emission of hot carriers. This Review discusses recent advances in the understanding and application of plasmon-induced hot carrier generation and highlights some of the exciting new directions for the field.

Spin and pseudospins in layered transition metal dichalcogenides

Abstract: The recent emergence of two-dimensional layered materials — in particular the transition metal dichalcogenides — provides a new laboratory for exploring the internal quantum degrees of freedom of electrons and their potential for new electronics. These degrees of freedom are the real electron spin, the layer pseudospin, and the valley pseudospin. New methods for the quantum control of the spin and these pseudospins arise from the existence of Berry phase-related physical properties and strong spin–orbit coupling. The former leads to the versatile control of the valley pseudospin, whereas the latter gives rise to an interplay between the spin and the pseudospins. Here, we provide a brief review of both theoretical and experimental advances in this field. Understanding the physics of two-dimensional materials beyond graphene is of both fundamental and practical interest. Recent theoretical and experimental advances uncover the interplay between real spin and pseudospins in layered transition metal dichalcogenides.

Emerging Device Applications for Semiconducting Two-Dimensional Transition Metal Dichalcogenides

Abstract: With advances in exfoliation and synthetic techniques, atomically thin films of semiconducting transition metal dichalcogenides have recently been isolated and characterized. Their two-dimensional structure, coupled with a direct band gap in the visible portion of the electromagnetic spectrum, suggests suitability for digital electronics and optoelectronics. Toward that end, several classes of high-performance devices have been reported along with significant progress in understanding their physical properties. Here, we present a review of the architecture, operating principles, and physics of electronic and optoelectronic devices based on ultrathin transition metal dichalcogenide semiconductors. By critically assessing and comparing the performance of these devices with competing technologies, the merits and shortcomings of this emerging class of electronic materials are identified, thereby providing a roadmap for future development.