Robert C. N. Pilawa-Podgurski

Bio: Robert C. N. Pilawa-Podgurski is an academic researcher from University of California, Berkeley. The author has contributed to research in topics: Capacitor & Converters. The author has an hindex of 37, co-authored 178 publications receiving 5456 citations. Previous affiliations of Robert C. N. Pilawa-Podgurski include Massachusetts Institute of Technology & Urbana University.

Ultrawide-Bandgap Semiconductors: Research Opportunities and Challenges

Abstract: J. Y. Tsao,* S. Chowdhury, M. A. Hollis,* D. Jena, N. M. Johnson, K. A. Jones, R. J. Kaplar,* S. Rajan, C. G. Van de Walle, E. Bellotti, C. L. Chua, R. Collazo, M. E. Coltrin, J. A. Cooper, K. R. Evans, S. Graham, T. A. Grotjohn, E. R. Heller, M. Higashiwaki, M. S. Islam, P. W. Juodawlkis, M. A. Khan, A. D. Koehler, J. H. Leach, U. K. Mishra, R. J. Nemanich, R. C. N. Pilawa-Podgurski, J. B. Shealy, Z. Sitar, M. J. Tadjer, A. F. Witulski, M. Wraback, and J. A. Simmons

Opportunities and Challenges in Very High Frequency Power Conversion

Abstract: THIS paper explores opportunities and challenges in power conversion in the VHF frequency range of 30-300 MHz. The scaling of magnetic component size with frequency is investigated, and it is shown that substantial miniaturization is possible with increased frequencies even considering material and heat transfer limitations. Likewise, dramatic frequency increases are possible with existing and emerging semiconductor devices, but necessitate circuit designs that either compensate for or utilize device parasitics. We outline the characteristics of topologies and control methods that can meet the requirements of VHF power conversion, and present supporting examples from power converters operating at frequencies of up to 110 MHz.

Submodule Integrated Distributed Maximum Power Point Tracking for Solar Photovoltaic Applications

Abstract: This paper explores the benefits of distributed power electronics in solar photovoltaic applications through the use of submodule integrated maximum power point trackers (MPPT). We propose a system architecture that provides a substantial increase in captured energy during partial shading conditions, while at the same time enabling significant overall cost reductions. This is achieved through direct integration of miniature MPPT power converters into existing junction boxes. We describe the design and implementation of a high-efficiency (>;98%) synchronous buck MPPT converter, along with digital control techniques that ensure both local and global maximum power extraction. Through detailed experimental measurements under real-world conditions, we verify the increase in energy capture and quantify the benefits of the architecture.

Very-High-Frequency Resonant Boost Converters

Abstract: This paper presents a resonant boost topology suitable for very-high-frequency (VHF, 30-300 MHz) DC-DC power conversion. The proposed design features low device voltage stress, high efficiency over a wide load range, and excellent transient performance. Two experimental prototypes have been built and evaluated. One is a 110-MHz, 23-W converter that uses a high-performance RF lateral DMOSFET. The converter achieves higher than 87% efficiency at nominal input and output voltages, and maintains good efficiency down to 5% of full load. The second implementation, aimed toward integration, is a 50-MHz, 17-W converter that uses a transistor from a 50-V integrated power process. In addition, two resonant gate drive schemes suitable for VHF operation are presented, both of which provide rapid startup and low-loss operation. Both converters regulate the output using high-bandwidth, on-off hysteretic control, which enables fast transient response and efficient light-load operation. The low energy storage requirements of the converters allow the use of aircore inductors in both designs, thereby eliminating magnetic core loss and introducing the possibility of easy integration.

A 2-kW Single-Phase Seven-Level Flying Capacitor Multilevel Inverter With an Active Energy Buffer

Abstract: High-efficiency and compact single-phase inverters are desirable in many applications such as solar energy harvesting and electric vehicle chargers. This paper presents a 2-kW, 60-Hz, 450-V $ _{\text{DC}}$ -to-240-V $_{\text{AC}}$ power inverter, designed and tested subject to the specifications of the Google/IEEE Little Box Challenge. The inverter features a seven-level flying capacitor multilevel converter, with low-voltage GaN switches operating at 120 kHz. The inverter also includes an active buffer for twice-line-frequency power pulsation decoupling, which reduces the required capacitance by a factor of 8 compared to conventional passive decoupling capacitors, while maintaining an efficiency above 99%. The inverter prototype is a self-contained box that achieves a high power density of 216 W/in $^3$ and a peak overall efficiency of 97.6%, while meeting the constraints including input current ripple, load transient, thermal, and FCC Class B EMC specifications.

Step-Up DC–DC Converters: A Comprehensive Review of Voltage-Boosting Techniques, Topologies, and Applications

Abstract: DC–DC converters with voltage boost capability are widely used in a large number of power conversion applications, from fraction-of-volt to tens of thousands of volts at power levels from milliwatts to megawatts. The literature has reported on various voltage-boosting techniques, in which fundamental energy storing elements (inductors and capacitors) and/or transformers in conjunction with switch(es) and diode(s) are utilized in the circuit. These techniques include switched capacitor (charge pump), voltage multiplier, switched inductor/voltage lift, magnetic coupling, and multistage/-level, and each has its own merits and demerits depending on application, in terms of cost, complexity, power density, reliability, and efficiency. To meet the growing demand for such applications, new power converter topologies that use the above voltage-boosting techniques, as well as some active and passive components, are continuously being proposed. The permutations and combinations of the various voltage-boosting techniques with additional components in a circuit allow for numerous new topologies and configurations, which are often confusing and difficult to follow. Therefore, to present a clear picture on the general law and framework of the development of next-generation step-up dc–dc converters, this paper aims to comprehensively review and classify various step-up dc–dc converters based on their characteristics and voltage-boosting techniques. In addition, the advantages and disadvantages of these voltage-boosting techniques and associated converters are discussed in detail. Finally, broad applications of dc–dc converters are presented and summarized with comparative study of different voltage-boosting techniques.

Multi-level conversion : high voltage choppers and voltage-source inverters

Abstract: The authors discuss high-voltage power conversion. Conventional series connection and three-level voltage source inverter techniques are reviewed and compared. A novel versatile multilevel commutation cell is introduced: it is shown that this topology is safer and more simple to control, and delivers purer output waveforms. The authors show how this technique can be applied to either choppers or voltage-source inverters and generalized to any number of switches.<>

Ultrawide-Bandgap Semiconductors: Research Opportunities and Challenges

Abstract: J. Y. Tsao,* S. Chowdhury, M. A. Hollis,* D. Jena, N. M. Johnson, K. A. Jones, R. J. Kaplar,* S. Rajan, C. G. Van de Walle, E. Bellotti, C. L. Chua, R. Collazo, M. E. Coltrin, J. A. Cooper, K. R. Evans, S. Graham, T. A. Grotjohn, E. R. Heller, M. Higashiwaki, M. S. Islam, P. W. Juodawlkis, M. A. Khan, A. D. Koehler, J. H. Leach, U. K. Mishra, R. J. Nemanich, R. C. N. Pilawa-Podgurski, J. B. Shealy, Z. Sitar, M. J. Tadjer, A. F. Witulski, M. Wraback, and J. A. Simmons

A nanophotonic solar thermophotovoltaic device

Abstract: The most common approaches to generating power from sunlight are either photovoltaic, in which sunlight directly excites electron-hole pairs in a semiconductor, or solar-thermal, in which sunlight drives a mechanical heat engine. Photovoltaic power generation is intermittent and typically only exploits a portion of the solar spectrum efficiently, whereas the intrinsic irreversibilities of small heat engines make the solar-thermal approach best suited for utility-scale power plants. There is, therefore, an increasing need for hybrid technologies for solar power generation. By converting sunlight into thermal emission tuned to energies directly above the photovoltaic bandgap using a hot absorber-emitter, solar thermophotovoltaics promise to leverage the benefits of both approaches: high efficiency, by harnessing the entire solar spectrum; scalability and compactness, because of their solid-state nature; and dispatchablility, owing to the ability to store energy using thermal or chemical means. However, efficient collection of sunlight in the absorber and spectral control in the emitter are particularly challenging at high operating temperatures. This drawback has limited previous experimental demonstrations of this approach to conversion efficiencies around or below 1% (refs 9, 10, 11). Here, we report on a full solar thermophotovoltaic device, which, thanks to the nanophotonic properties of the absorber-emitter surface, reaches experimental efficiencies of 3.2%. The device integrates a multiwalled carbon nanotube absorber and a one-dimensional Si/SiO2 photonic-crystal emitter on the same substrate, with the absorber-emitter areas optimized to tune the energy balance of the device. Our device is planar and compact and could become a viable option for high-performance solar thermophotovoltaic energy conversion.