Robert L. White

Bio: Robert L. White is an academic researcher from Stanford University. The author has contributed to research in topics: Magnetization & Magnetic anisotropy. The author has an hindex of 38, co-authored 120 publications receiving 5514 citations. Previous affiliations of Robert L. White include Geballe Laboratory for Advanced Materials.

Chemical effects at metal/oxide interfaces studied by x-ray-absorption spectroscopy

Abstract: A chemical and magnetic characterization of ferromagnet/antiferromagnet interfaces is essential to understand the microscopic origins of exchange anisotropy and other magnetic phenomena. We have used high-resolution L-edge x-ray absorption spectroscopy (XAS), which is element specific and sensitive to chemical environment and spin orientation, to investigate the interface of antiferromagnetic oxides with ferromagnetic metals. Clear quantitative evidence of oxidation/reduction reactions at the as-grown metal/oxide interface is presented. In situ-- and ex situ--grown samples of the form oxide $(5--30 \AA{})/\mathrm{metal}$ $(1--10 \AA{}),$ where oxide is either NiO or CoO and metal is either Fe, Co, or Ni, were studied by high-resolution XAS. For all samples, a metal(oxide) layer adjacent to an oxide(metal) layer was partially oxidized(reduced). Quantitative analysis of the spectra showed that one to two atomic layers on either side of the interface were oxidized/reduced. An elemental series of samples showed that the amount of oxidation/reduction was in accord with the difference in oxidation potentials of the adjacent cations, e.g., oxide layers were more strongly reduced by an iron metal layer than by cobalt or nickel metal layers. Annealing to temperatures, typically used to bias devices, was shown to significantly increase the amount of oxidation/reduction. The oxidation behavior of iron was shown to depend on the amount of oxygen available. Our results are believed to provide important information for the improved understanding of exchange anisotropy.

Patterned media: a viable route to 50 Gbit/in/sup 2/ and up for magnetic recording?

Abstract: The superparamagnetic limit on grain sizes may soon hinder progress in high density magnetic recording, and patterned media has been proposed as a means of overcoming this limit. Although no clear path exists for implementation of a patterned medium recording system, it is nonetheless worth considering some of the system-level problems and possibilities that would be inevitably associated with such a system. This paper examines some of these system-level issues, including implications for recording media, recording heads, and write-field pulse timing.

Multiplex protein assays based on real-time magnetic nanotag sensing

Abstract: Magnetic nanotags (MNTs) are a promising alternative to fluorescent labels in biomolecular detection assays, because minute quantities of MNTs can be detected with inexpensive giant magnetoresistive (GMR) sensors, such as spin valve (SV) sensors. However, translating this promise into easy to use and multilplexed protein assays, which are highly sought after in molecular diagnostics such as cancer diagnosis and treatment monitoring, has been challenging. Here, we demonstrate multiplex protein detection of potential cancer markers at subpicomolar concentration levels and with a dynamic range of more than four decades. With the addition of nanotag amplification, the analytic sensitivity extends into the low fM concentration range. The multianalyte ability, sensitivity, scalability, and ease of use of the MNT-based protein assay technology make it a strong contender for versatile and portable molecular diagnostics in both research and clinical settings.

Pitch perception by cochlear implant subjects

Abstract: Direct electrical stimulation of the auditory nerve can be used to restore some degree of hearing to the profoundly deaf. Percepts due to electrical stimulation have characteristics corresponding approximately to the acoustic percepts of loudness, pitch, and timbre. To encode speech as a pattern of electrical stimulation, it is necessary to determine the effects of the stimulus parameters on these percepts. The effects of the three basic stimulus parameters of level, repetition rate, and stimulation location on subjects' percepts were examined. Pitch difference limens arising from changes in rate of stimulation increase as the stimulating rate increases, up to a saturation point of between 200 and 1000 pulses per second. Changes in pitch due to electrode selection depend upon the subject, but generally agree with a tonotopic organization of the human cochlea. Further, the discriminability of such place-pitch percepts seems to be dependent on the degree of current spread in the cochlea. The effect of stimulus level on perceived pitch is significant but is highly dependent on the individual tested. The results of these experiments are discussed in terms of their impact on speech-processing strategies and their relevance to acoustic pitch perception.

Radio-Frequency Coils in Implantable Devices: Misalignment Analysis and Design Procedure

Abstract: Radio-frequency (RF) coils are used extensively in the design of implantable devices for transdermal power and data transmission. The practical issues of coil misalignments and configurations have not been investigated, and this paper presents a detailed theoretical analysis of misalignment effects in RF coil systems, including lateral and angular misalignments. Formulas are derived for the mutual inductance and, whenever possible, simplified upper bounds and lower bounds of the coupling coefficient are provided. A design procedure is established to maximize coil coupling for a given configuration, and a companion paper [1] discusses a circuit design technique to reduce the effects of misalignment on transmission efficiency.

Monodisperse MFe2O4 (M = Fe, Co, Mn) Nanoparticles

Abstract: High-temperature solution phase reaction of iron(III) acetylacetonate, Fe(acac)3, with 1,2-hexadecanediol in the presence of oleic acid and oleylamine leads to monodisperse magnetite (Fe3O4) nanoparticles. Similarly, reaction of Fe(acac)3 and Co(acac)2 or Mn(acac)2 with the same diol results in monodisperse CoFe2O4 or MnFe2O4 nanoparticles. Particle diameter can be tuned from 3 to 20 nm by varying reaction conditions or by seed-mediated growth. The as-synthesized iron oxide nanoparticles have a cubic spinel structure as characterized by HRTEM, SAED, and XRD. Further, Fe3O4 can be oxidized to Fe2O3, as evidenced by XRD, NEXAFS spectroscopy, and SQUID magnetometry. The hydrophobic nanoparticles can be transformed into hydrophilic ones by adding bipolar surfactants, and aqueous nanoparticle dispersion is readily made. These iron oxide nanoparticles and their dispersions in various media have great potential in magnetic nanodevice and biomagnetic applications.

Ferromagnetic materials

Abstract: In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.