Author
Rod Waterhouse
Other affiliations: ULTra, Melbourne Institute of Technology, Cooperative Research Centre ...read more
Bio: Rod Waterhouse is an academic researcher from University of Melbourne. The author has contributed to research in topics: Microstrip antenna & Patch antenna. The author has an hindex of 40, co-authored 225 publications receiving 6891 citations. Previous affiliations of Rod Waterhouse include ULTra & Melbourne Institute of Technology.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, a variation of the aperture-coupled stacked patch microstrip antenna is presented, which greatly enhances its bandwidth, and the impedance behavior of this antenna is compared with that of other wideband radiators.
Abstract: A variation of the aperture-coupled stacked patch microstrip antenna is presented, which greatly enhances its bandwidth. Bandwidths of up to one octave have been achieved. The impedance behavior of this antenna is compared with that of other wide-band microstrip radiators. Matching techniques for the antenna are presented and their relative merits discussed. The effects of varying several key physical parameters of the antenna are investigated, lending some insight into its wide-band operation. Variations on the design such as incorporation of additional patches are also discussed.
515 citations
TL;DR: An overview of different techniques to optically transport mm-wave wireless signals and to overcome impairments associated with the transport of the wireless signals is presented and the different designs of subsystems for integrating fiber-wireless technology onto existing optical infrastructure are reviewed.
Abstract: Hybrid fiber-wireless networks incorporating WDM technology for fixed wireless access operating in the sub-millimeter-wave and millimeter-wave (mm-wave) frequency regions are being actively pursued to provide untethered connectivity for ultrahigh bandwidth communications. The architecture of such radio networks requires a large number of antenna base-stations with high throughput to be deployed to maximize the geographical coverage with the main switching and routing functionalities located in a centralized location. The transportation of mm-wave wireless signals within the hybrid network is subject to several impairments including low opto-electronic conversion efficiency, fiber chromatic dispersion and also degradation due to nonlinearities along the link. One of the major technical challenges in implementing such networks lies in the mitigation of these various optical impairments that the wireless signals experience within the hybrid network. In this paper, we present an overview of different techniques to optically transport mm-wave wireless signals and to overcome impairments associated with the transport of the wireless signals. We also review the different designs of subsystems for integrating fiber-wireless technology onto existing optical infrastructure.
510 citations
TL;DR: In this paper, the advantages of microstrip patch technology over its competitors is its low profile and hence small volume, and the relative ease in which it can be connected to the feed network, as was highlighted in Chapter 2.
Abstract: As stated in Chapter 1, one of the many advantages of microstrip patch technology over its competitors is its low profile and hence small volume. Another key advantage of this printed antenna is the relative ease in which it can be connected to the feed network, as was highlighted in Chapter 2. For these reasons antenna design engineers deduced that microstrip patch antennas could be utilized for applications requiring where there was very limited space to mount the antenna. One such global application is for wireless communication handset terminals.
399 citations
TL;DR: In this paper, a quasi-Yagi antenna based on the classic Yagi-Uda dipole array is presented, which achieves a measured 48% bandwidth for VSWR <2, better than 12 dB front-to-back ratio, smaller than -15 dB cross polarization, 3-5 dB absolute gain and a nominal efficiency of 93% across the operating bandwidth.
Abstract: A novel broadband planar antenna based on the classic Yagi-Uda dipole array is presented. This "quasi-Yagi" antenna achieves a measured 48% bandwidth for VSWR <2, better than 12 dB front-to-back ratio, smaller than -15 dB cross polarization, 3-5 dB absolute gain and a nominal efficiency of 93% across the operating bandwidth. Finite-difference time-domain simulation is used for optimization of the antenna and the results agree very well with measurements. Additionally, a gain-enhanced design is presented, where higher gain has been achieved at the cost of reduced bandwidth. These quasi-Yagi antennas are realized on a high dielectric constant substrate and are completely compatible with microstrip circuitry and solid-state devices. The excellent radiation properties of this antenna make it ideal as either a stand-alone antenna with a broad pattern or as an array element. The antenna should find wide applications in wireless communication systems, power combining, phased arrays and active arrays, as well as millimeter-wave imaging arrays.
385 citations
TL;DR: Techniques to enhance the bandwidth of these antennas are presented, and valuable insight to the optimum design, namely broad bandwidth, small size, and ease of manufacturing, is given.
Abstract: Electrically small microstrip patches incorporating shorting posts are thoroughly investigated. These antennas are suitable for mobile communications handsets where limited antenna size is a premium. Techniques to enhance the bandwidth of these antennas are presented and performance trends are established. From these trends, valuable insight to the optimum design, namely broad bandwidth, small size, and ease of manufacturing, is given.
298 citations
Cited by
More filters
TL;DR: Microwave photonics has attracted great interest from both the research community and the commercial sector over the past 30 years and is set to have a bright future as mentioned in this paper, which makes it possible to have functions in microwave systems that are complex or even not directly possible in the radiofrequency domain and also creates new opportunities for telecommunication networks.
Abstract: Microwave photonics, which brings together the worlds of radiofrequency engineering and optoelectronics, has attracted great interest from both the research community and the commercial sector over the past 30 years and is set to have a bright future. The technology makes it possible to have functions in microwave systems that are complex or even not directly possible in the radiofrequency domain and also creates new opportunities for telecommunication networks. Here we introduce the technology to the photonics community and summarize recent research and important applications.
2,354 citations
Book•
15 Jan 2002
TL;DR: In this paper, the authors present an overview of the most recent advances in regular-size Dual-Frequency Antennas and their application in a wide range of applications, including: 1.1 Introduction.
Abstract: Preface. 1. Introduction and Overview. 1.1 Introduction. 1.2 Compact Microstrip Antennas. 1.3 Compact Broadband Microstrip Antennas. 1.4 Compact Dual-Frequency Microstrip Antennas. 1.5 Compact Dual-Polarized Microstrip Antennas. 1.6 Compact Circularly Polarized Microstrip Antennas. 1.7 Compact Microstrip Antennas with Enhanced Gain. 1.8 Broadband Microstrip Antennas. 1.9 Broadband Dual-Frequency and Dual-Polarized Microstrip Antennas. 1.10 Broadband and Dual-Band Circularly Polarized Microstrip Antennas. 2. Compact Microstrip Antennas. 2.1 Introduction. 2.2 Use of a Shorted Patch with a Thin Dielectric Substrate. 2.3 Use of a Meandered Patch. 2.4 Use of a Meandered Ground Plane. 2.5 Use of a Planar Inverted-L Patch. 2.6 Use of an Inverted U-Shaped or Folded Patch. 3. Compact Broadband Microstrip Antennas. 3.1 Introduction. 3.2 Use of a Shorted Patch with a Thick Air Substrate. 3.3 Use of Stacked Shorted Patches. 3.4 Use of Chip-Resistor and Chip-Capacitor Loading Technique. 3.5 Use of a Slot-Loading Technique. 3.6 Use of a Slotted Ground Plane. 4. Compact Dual-Frequency and Dual-Polarized Microstrip Antennas. 4.1 Introduction. 4.2 Some Recent Advances in Regular-Size Dual-Frequency Designs. 4.3 Compact Dual-Frequency Operation with Same Polarization Planes. 4.4 Compact Dual-Frequency Operation. 4.5 Dual-Band or Triple-Band PIFA. 4.6 Compact Dual-Polarized Designs. 5. Compact Circularly Polarized Microstrip Antennas. 5.1 Introduction. 5.2 Designs with a Cross-Slot of Unequal Arm Lengths. 5.3 Designs with a Y-Shaped Slot of Unequal Arm Lengths. 5.4 Designs with Slits. 5.5 Designs with Spur Lines. 5.6 Designs with Truncated Corners. 5.7 Designs with Peripheral Cuts. 5.8 Designs with a Tuning Stub. 5.9 Designs with a Bent Tuning Stub. 5.10 Compact CP Designs with an Inset Microstrip-Line Feed. 6. Compact Microstrip Antennas with Enhanced Gain. 6.1 Introduction. 6.2 Compact Microstrip Antennas with High-Permittivity Superstrate. 6.3 Compact Microstrip Antennas with Active Circuitry. 7. Broadband Microstrip Antennas. 7.1 Introduction. 7.2 Use of Additional Microstrip Resonators. 7.3 Microstrip Antennas with an Air Substrate. 7.4 Broadband Slot-Loaded Microstrip Antennas. 7.5 Broadband Microstrip Antennas with an Integrated Reactive Loading. 7.6 Broadband Microstrip Antennas with Reduced Cross-Polarization Radiation. 8. Broadband Dual-Frequency and Dual-Polarized Microstrip Antennas. 8.1 Introduction. 8.2 Broadband Dual-Frequency Microstrip Antennas. 8.3 Broadband Dual-Polarized Microstrip Antennas. 9. Broadband and Dual-Band Circularly Polarized Microstrip Antennas. 9.1 Introduction. 9.2 Broadband Single-Feed Circularly Polarized Microstrip Antennas. 9.3 Broadband Two-Feed Circularly Polarized Microstrip Antennas. 9.4 Broadband Four-Feed Circularly Polarized Microstrip Antennas. 9.5 Dual-Band Circularly Polarized Microstrip Antennas. Index.
1,734 citations
Book•
01 Oct 2002
TL;DR: In this article, the authors provide an exhaustive coverage of broadband techniques, including the most up-to-date information to help users choose and design the optimum broadband microstrip antenna configurations without sacrificing other antenna parameters.
Abstract: Look to this new, cutting-edge microstrip antenna book for the first exhaustive coverage of broadband techniques, including the most up-to-date information to help you choose and design the optimum broadband microstrip antenna configurations for your applications, without sacrificing other antenna parameters. The book shows you how to take advantage of the lightweight, low volume benefits of these antennas, by providing clear explanations of the various configurations and simple design equations that help you analyze and design microstrip antennas with speed and confidence. This practical resource offers you a comprehensive understanding of the radiation mechanism and characteristic of microstrip antennas, and provides guidance in designing new types of planar monopole antennas with multi-octave bandwidth. You learn how to select and design proper broadband microstrip antenna configurations for compact, tunable, dual-band and circular polarization applications. Moreover, the book compares all the broadband techniques and suggests the most attractive configuration. Extensively referenced with over 300 illustrations and 140 equations.
1,436 citations
Proceedings Article•
[...]
TL;DR: In this article, the performance requirements for externally-modulated analog microwave photonic links are reviewed with specific emphasis placed on modulator efficiency, laser noise, detected photocurrent, and link linearity.
Abstract: An overview of analog microwave photonics will be presented. The performance requirements for externally-modulated analog microwave photonic links will be reviewed with specific emphasis placed on modulator efficiency, laser noise, detected photocurrent, and link linearity.
1,434 citations
Journal Article•
[...]
TL;DR: In this paper, techniques developed in the last few years in microwave photonics are reviewed with an emphasis on the systems architectures for photonic generation and processing of microwave signals, photonic true-time delay beamforming, radio-over-fiber systems, and photonic analog-to-digital conversion.
Abstract: Broadband and low loss capability of photonics has led to an ever-increasing interest in its use for the generation, processing, control and distribution of microwave and millimeter-wave signals for applications such as broadband wireless access networks, sensor networks, radar, satellite communitarians, instrumentation and warfare systems. In this tutorial, techniques developed in the last few years in microwave photonics are reviewed with an emphasis on the systems architectures for photonic generation and processing of microwave signals, photonic true-time delay beamforming, radio-over-fiber systems, and photonic analog-to-digital conversion. Challenges in system implementation for practical applications and new areas of research in microwave photonics are also discussed.
1,332 citations