Rodney S. Ruoff

Bio: Rodney S. Ruoff is an academic researcher from Ulsan National Institute of Science and Technology. The author has contributed to research in topics: Graphene & Graphene oxide paper. The author has an hindex of 164, co-authored 666 publications receiving 194902 citations. Previous affiliations of Rodney S. Ruoff include Texas State University & North Carolina State University.

Synthesis of a Copper 1,3,5-Triamino-2,4,6-benzenetriol Metal-Organic Framework.

Abstract: We report the synthesis and characterization of a two-dimensional (2D) MX2Y2-type (M = metal, X, Y = N, S, O, and X ≠ Y) copper 1,3,5-triamino-2,4,6-benzenetriol metal-organic framework (Cu3(TABTO)2-MOF). The role of oxygen in the synthesis of this MOF was investigated. Copper metal is formed along with the MOF when the synthesis is done in argon as suggested by XRD. When the reaction was exposed to air with vigorous stirring, copper metal was not observed by XRD. However, if there is no stirring, then copper metal is formed, and we learned that this is because oxygen was not allowed to enter the solvent due to the formation of a MOF film at the air/water interface. For the sample synthesized in argon (Cu3(TABTO)2-Ar), an insulating Cu3(TABTO)2-Ar pellet (σ < 10-10 S cm-1) became a metallic conductor with an electrical conductivity of 0.78 S cm-1 at 300 K after exposure to iodine vapor. This work provides further insights into the role of oxygen in the synthesis of redox-active ligand-based MOFs, expands the family of 2D redox-active ligand-based electrically conductive MOFs, and offers more opportunities in sensing, photocatalytic, electronic, and energy-related applications.

A general approach to composites containing nonmetallic fillers and liquid gallium

Abstract: We report a versatile method to make liquid metal composites by vigorously mixing gallium (Ga) with non-metallic particles of graphene oxide (G-O), graphite, diamond, and silicon carbide that display either paste or putty-like behavior depending on the volume fraction. Unlike Ga, the putty-like mixtures can be kneaded and rolled on any surface without leaving residue. By changing temperature, these materials can be stiffened, softened, and, for the G-O-containing composite, even made porous. The gallium putty (GalP) containing reduced G-O (rG-O) has excellent electromagnetic interference shielding effectiveness. GalP with diamond filler has excellent thermal conductivity and heat transfer superior to a commercial liquid metal-based thermal paste. Composites can also be formed from eutectic alloys of Ga including Ga-In (EGaIn), Ga-Sn (EGaSn), and Ga-In-Sn (EGaInSn or Galinstan). The versatility of our approach allows a variety of fillers to be incorporated in liquid metals, potentially allowing filler-specific "fit for purpose" materials.

Rupturing C60 Molecules into Graphene‐Oxide‐like Quantum Dots: Structure, Photoluminescence, and Catalytic Application

Abstract: The large-scale synthesis of graphene-oxide-like quantum dots (GOLQDs) is reported by oxidizing C(60) molecules using a modified Hummers method with a yield of ≈25 wt% readily achieved. The GOLQDs are highly soluble in water and in addition to hexagons have other carbon rings in the structure. They have an average height of ≈1.2 nm and a diameter distribution of 0.6-2.2 nm after drying on substrates. First-principle calculations indicate that a possible rupturing route may include the insertion of oxygen atoms to CC bonds in the C(60) molecule, followed by rupture of that CC bonds. The GOLQD suspension has a strong photoluminescence (PL) with peak position dependent on excitation wavelength. The PL is related to the size and emissive traps caused by oxygen-containing groups. The GOLQDs also catalyze the oxidation of benzyl alcohol with a high selectivity.

Graphene oxide sheet laminate and method

Abstract: A macroscale sheet laminate includes individual graphene oxide sheets layered one on another in a manner to form a self-supporting paper-like laminated product. The product can be fabricated by making a suspension of individual graphene oxide sheets and assembling the graphene oxide sheets as a laminate on a fluid-permeable support by flow-directed assembly. The laminate is dried and released from the membrane filter as a self-supporting sheet laminate.

Rotational spectra and structures of the OC– and H3N–HCN–HF trimers: Coaxial mixing nozzle for reactive species

Abstract: Rotational spectra are reported for several isotopic species of the OC–and H3N–HCN–HF heterotrimers, detected with a pulsed nozzle, Fourier transform, Balle/Flygare microwave spectrometer.Rotational constants for the main isotopic species of the OC trimer are a B 0 of 615.574 MHz and D J of 251 Hz, and for H3N, a symmetric top, a B 0 of 1067.161 MHz and D J and D J K of 0.40 and 63 kHz. Their structures are composites of those reported for the X–HCN and HCN–HF dimers. They are effectively axially symmetric but have some shrinkage from the distances in the dimers. The shrinkages found in r 1, the c.m. to c.m. distance for X–HCN are 0.070 and 0.098 A for X=OC and H3N, respectively, and in r 2 for HCN–HF, 0.033 and 0.027 A. The 1 4N and H–F hyperfine interactions in OC–HCN–HF are the same as those reported for the HCN–HF dimer. Detection of the X=OC and H3N trimers out of the many species possible required care in their generation. Both were favored by the strongly bonded HCN–HF subunit. The OC–HCN–HF was further enhanced by using a high concentration of CO in the gas expansion. For H3N–HCN–HF a coaxial mixing nozzle was developed to avoid the formation of NH4F(s). The selectivity and simplicity of the nozzle should be helpful in extending the range of species observable with pulsed nozzles.

The rise of graphene

Abstract: Graphene is a rapidly rising star on the horizon of materials science and condensed-matter physics. This strictly two-dimensional material exhibits exceptionally high crystal and electronic quality, and, despite its short history, has already revealed a cornucopia of new physics and potential applications, which are briefly discussed here. Whereas one can be certain of the realness of applications only when commercial products appear, graphene no longer requires any further proof of its importance in terms of fundamental physics. Owing to its unusual electronic spectrum, graphene has led to the emergence of a new paradigm of 'relativistic' condensed-matter physics, where quantum relativistic phenomena, some of which are unobservable in high-energy physics, can now be mimicked and tested in table-top experiments. More generally, graphene represents a conceptually new class of materials that are only one atom thick, and, on this basis, offers new inroads into low-dimensional physics that has never ceased to surprise and continues to provide a fertile ground for applications.

Fast parallel algorithms for short-range molecular dynamics

Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

疟原虫var基因转换速率变化导致抗原变异[英]／Paul H, Robert P, Christodoulou Z, et al//Proc Natl Acad Sci U S A

Abstract: 抗原变异可使得多种致病微生物易于逃避宿主免疫应答。表达在感染红细胞表面的恶性疟原虫红细胞表面蛋白1（PfPMP1）与感染红细胞、内皮细胞、树突状细胞以及胎盘的单个或多个受体作用，在黏附及免疫逃避中起关键的作用。每个单倍体基因组var基因家族编码约60种成员，通过启动转录不同的var基因变异体为抗原变异提供了分子基础。

Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene

Abstract: We measured the elastic properties and intrinsic breaking strength of free-standing monolayer graphene membranes by nanoindentation in an atomic force microscope. The force-displacement behavior is interpreted within a framework of nonlinear elastic stress-strain response, and yields second- and third-order elastic stiffnesses of 340 newtons per meter (N m(-1)) and -690 Nm(-1), respectively. The breaking strength is 42 N m(-1) and represents the intrinsic strength of a defect-free sheet. These quantities correspond to a Young's modulus of E = 1.0 terapascals, third-order elastic stiffness of D = -2.0 terapascals, and intrinsic strength of sigma(int) = 130 gigapascals for bulk graphite. These experiments establish graphene as the strongest material ever measured, and show that atomically perfect nanoscale materials can be mechanically tested to deformations well beyond the linear regime.