Rutger A. van Santen

Bio: Rutger A. van Santen is an academic researcher from Eindhoven University of Technology. The author has contributed to research in topics: Catalysis & Adsorption. The author has an hindex of 56, co-authored 303 publications receiving 11195 citations. Previous affiliations of Rutger A. van Santen include Katholieke Universiteit Leuven & Utrecht University.

Reactivity Theory of Transition-Metal Surfaces: A Brønsted−Evans−Polanyi Linear Activation Energy−Free-Energy Analysis

Abstract: The exponential increase in computational processor speed, the development of novel computational architectures, together with the tremendous advances in ab initio theoretical methods that have emerged over the past two decades have led to unprecedented advances in our ability to probe the fundamental chemistry that occurs on complex catalytic surfaces. In particular, advances in density functional theory (DFT) have made it possible to elucidate the elementary steps and mechanisms in surface-catalyzed processes that would be difficult to explore experimentally. The advanced state of plane wave DFT has made it possible to rapidly examine systematic changes to the metal or the reactant in order to establish structure-property relationships. As a result, extensive data based on the energetics for various different surface-catalyzed reactions has been generated. This invites a detailed theoretical analysis of the factors that control reaction paths and corresponding potentialenergy surfaces of surface reactions. Such a theoretical analysis will not only provide interesting new insights into the intricate relationship between the chemical bonding features, structure, and energies of transition states but also serve as a basis for the development of analytical expressions that relate transitionstate properties to more easily accessible thermodynamic properties. The Brønsted-Evans-Polanyi (BEP) relationship is one such example which has been widely applied in the analysis of surface elementary reaction steps.1-8 δEact )RδEr (1)

Concepts in Theoretical Heterogeneous Catalytic Reactivity

Abstract: Introduction A. General The heart of many commercial catalytic processes involves chemistry on transition metal particles and surfaces. The success in designing active surface ensembles, promoters, and selective poisons is inevitably tied to our knowledge of the fundamental principles which control transition metal surface chemistry. One extreme would be the rigorous description and energetic predictions for each elementary reaction step of an entire catalytic cycle from first-principle theoretical methods. While desirable, this has to date been an unattainable goal due to the limitations in both raw computer (CPU) requirements and the accuracy of the available computational methods. Recent advances in both quantum-chemical methods and computational resources, however, are driving this goal closer to reality. Theoretical treatments of adsorbate-surface interactions have rapidly advanced to the stage where detailed understandings of the governing structural and electronic features are readily available. In...

Periodic Density Functional Study of CO and OH Adsorption on Pt−Ru Alloy Surfaces: Implications for CO Tolerant Fuel Cell Catalysts

Abstract: In this work, we present results of a periodic density-functional theory study of the adsorption of carbon monoxide (CO) and hydroxyl (OH) on platinum, ruthenium, and a series on platinum−ruthenium alloys. The surfaces are modeled as four-layer slabs. The binding energies and geometries of CO and OH are computed, as well as the vibrational properties of chemisorbed CO. We find that the mixing of Pt by Ru leads to a weaker bond of both CO and OH to the Pt sites, whereas mixing of Ru by Pt causes a stronger bond of CO and OH to the Ru sites. The binding energy trends for CO do not show a clear-cut relationship with its vibrational characteristics. The binding energy changes are electronic alloying effects that can be explained by the d band shift model of Hammer and Norskov. From our calculations, we can conclude that for a good CO oxidation fuel cell catalyst, it is important to have both Pt sites (which bind CO weakly) and Ru sites (which bind OH strongly) on the surface. However, if a low surface coverag...

Mechanism for vibrational relaxation in water investigated by femtosecond infrared spectroscopy

Abstract: We present a study on the relaxation of the O–H stretch vibration in a dilute HDO:D2O solution using femtosecond mid-infrared pump-probe spectroscopy. We performed one-color experiments in which the 0→1 vibrational transition is probed at different frequencies, and two-color experiments in which the 1→2 transition is probed. In the one-color experiments, it is observed that the relaxation is faster at the blue side than at the center of the absorption band. Furthermore, it is observed that the vibrational relaxation time T1 shows an anomalous temperature dependence and increases from 0.74±0.01 ps at 298 K to 0.90±0.02 ps at 363 K. These results indicate that the O–H⋯O hydrogen bond forms the dominant accepting mode in the vibrational relaxation of the O–H stretch vibration.

The optimally performing Fischer-Tropsch catalyst

Abstract: Microkinetics simulations are presented based on DFT-determined elementary reaction steps of the Fischer–Tropsch (FT) reaction. The formation of long-chain hydrocarbons occurs on stepped Ru surfaces with CH as the inserting monomer, whereas planar Ru only produces methane because of slow CO activation. By varying the metal–carbon and metal–oxygen interaction energy, three reactivity regimes are identified with rates being controlled by CO dissociation, chain-growth termination, or water removal. Predicted surface coverages are dominated by CO, C, or O, respectively. Optimum FT performance occurs at the interphase of the regimes of limited CO dissociation and chain-growth termination. Current FT catalysts are suboptimal, as they are limited by CO activation and/or O removal.

Green Chemistry: Principles and Practice

Abstract: Green Chemistry is a relatively new emerging field that strives to work at the molecular level to achieve sustainability. The field has received widespread interest in the past decade due to its ability to harness chemical innovation to meet environmental and economic goals simultaneously. Green Chemistry has a framework of a cohesive set of Twelve Principles, which have been systematically surveyed in this critical review. This article covers the concepts of design and the scientific philosophy of Green Chemistry with a set of illustrative examples. Future trends in Green Chemistry are discussed with the challenge of using the Principles as a cohesive design system (93 references).

Hollow Micro-/Nanostructures: Synthesis and Applications**

Abstract: Hollow micro-/nanostructures are of great interest in many current and emerging areas of technology. Perhaps the best-known example of the former is the use of fly-ash hollow particles generated from coal power plants as partial replacement for Portland cement, to produce concrete with enhanced strength and durability. This review is devoted to the progress made in the last decade in synthesis and applications of hollow micro-/nanostructures. We present a comprehensive overview of synthetic strategies for hollow structures. These strategies are broadly categorized into four themes, which include well-established approaches, such as conventional hard-templating and soft-templating methods, as well as newly emerging methods based on sacrificial templating and template-free synthesis. Success in each has inspired multiple variations that continue to drive the rapid evolution of the field. The Review therefore focuses on the fundamentals of each process, pointing out advantages and disadvantages where appropriate. Strategies for generating more complex hollow structures, such as rattle-type and nonspherical hollow structures, are also discussed. Applications of hollow structures in lithium batteries, catalysis and sensing, and biomedical applications are reviewed.

Ab-initio simulations of materials using VASP: Density-functional theory and beyond.

Abstract: During the past decade, computer simulations based on a quantum-mechanical description of the interactions between electrons and between electrons and atomic nuclei have developed an increasingly important impact on solid-state physics and chemistry and on materials science—promoting not only a deeper understanding, but also the possibility to contribute significantly to materials design for future technologies. This development is based on two important columns: (i) The improved description of electronic many-body effects within density-functional theory (DFT) and the upcoming post-DFT methods. (ii) The implementation of the new functionals and many-body techniques within highly efficient, stable, and versatile computer codes, which allow to exploit the potential of modern computer architectures. In this review, I discuss the implementation of various DFT functionals [local-density approximation (LDA), generalized gradient approximation (GGA), meta-GGA, hybrid functional mixing DFT, and exact (Hartree-Fock) exchange] and post-DFT approaches [DFT + U for strong electronic correlations in narrow bands, many-body perturbation theory (GW) for quasiparticle spectra, dynamical correlation effects via the adiabatic-connection fluctuation-dissipation theorem (AC-FDT)] in the Vienna ab initio simulation package VASP. VASP is a plane-wave all-electron code using the projector-augmented wave method to describe the electron-core interaction. The code uses fast iterative techniques for the diagonalization of the DFT Hamiltonian and allows to perform total-energy calculations and structural optimizations for systems with thousands of atoms and ab initio molecular dynamics simulations for ensembles with a few hundred atoms extending over several tens of ps. Applications in many different areas (structure and phase stability, mechanical and dynamical properties, liquids, glasses and quasicrystals, magnetism and magnetic nanostructures, semiconductors and insulators, surfaces, interfaces and thin films, chemical reactions, and catalysis) are reviewed. © 2008 Wiley Periodicals, Inc. J Comput Chem, 2008

Hydroxymethylfurfural, A Versatile Platform Chemical Made from Renewable Resources

Abstract: Renewable Resources Robert-Jan van Putten,†,‡ Jan C. van der Waal,† Ed de Jong,*,† Carolus B. Rasrendra,‡,⊥ Hero J. Heeres,*,‡ and Johannes G. de Vries* †Avantium Chemicals, Zekeringstraat 29, 1014 BV Amsterdam, the Netherlands ‡Department of Chemical Engineering, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands Stratingh Institute for Chemistry, University of Groningen, Nijenborgh 4, 9747 AG Groningen, the Netherlands DSM Innovative Synthesis BV, P.O. Box 18, 6160 MD Geleen, the Netherlands Department of Chemical Engineering, Institut Teknologi Bandung, Ganesha 10, Bandung 40132, Indonesia

Mesoporous materials for drug delivery.

Abstract: Research on mesoporous materials for biomedical purposes has experienced an outstanding increase during recent years. Since 2001, when MCM-41 was first proposed as drug-delivery system, silica-based materials, such as SBA-15 or MCM-48, and some metal-organic frameworks have been discussed as drug carriers and controlled-release systems. Mesoporous materials are intended for both systemic-delivery systems and implantable local-delivery devices. The latter application provides very promising possibilities in the field of bone-tissue repair because of the excellent behavior of these materials as bioceramics. This Minireview deals with the advances in this field by the control of the textural parameters, surface functionalization, and the synthesis of sophisticated stimuli-response systems.