Ryo Kitaura

Bio: Ryo Kitaura is an academic researcher from Nagoya University. The author has contributed to research in topics: Carbon nanotube & Monolayer. The author has an hindex of 43, co-authored 167 publications receiving 19560 citations. Previous affiliations of Ryo Kitaura include Kyoto University & Hokkaido University.

Functional porous coordination polymers.

Abstract: The chemistry of the coordination polymers has in recent years advanced extensively, affording various architectures, which are constructed from a variety of molecular building blocks with different interactions between them. The next challenge is the chemical and physical functionalization of these architectures, through the porous properties of the frameworks. This review concentrates on three aspects of coordination polymers: 1). the use of crystal engineering to construct porous frameworks from connectors and linkers ("nanospace engineering"), 2). characterizing and cataloging the porous properties by functions for storage, exchange, separation, etc., and 3). the next generation of porous functions based on dynamic crystal transformations caused by guest molecules or physical stimuli. Our aim is to present the state of the art chemistry and physics of and in the micropores of porous coordination polymers.

Highly controlled acetylene accommodation in a metal–organic microporous material

Abstract: Metal-organic microporous materials (MOMs) have attracted wide scientific attention owing to their unusual structure and properties, as well as commercial interest due to their potential applications in storage, separation and heterogeneous catalysis. One of the advantages of MOMs compared to other microporous materials, such as activated carbons, is their ability to exhibit a variety of pore surface properties such as hydrophilicity and chirality, as a result of the controlled incorporation of organic functional groups into the pore walls. This capability means that the pore surfaces of MOMs could be designed to adsorb specific molecules; but few design strategies for the adsorption of small molecules have been established so far. Here we report high levels of selective sorption of acetylene molecules as compared to a very similar molecule, carbon dioxide, onto the functionalized surface of a MOM. The acetylene molecules are held at a periodic distance from one another by hydrogen bonding between two non-coordinated oxygen atoms in the nanoscale pore wall of the MOM and the two hydrogen atoms of the acetylene molecule. This permits the stable storage of acetylene at a density 200 times the safe compression limit of free acetylene at room temperature.

Funktionale poröse Koordinationspolymere

Abstract: Die Chemie der Koordinationspolymere hat sich in den vergangenen Jahren rasant entwickelt. Strukturen aus einer Vielzahl molekularer Bausteine mit unterschiedlichen Wechselwirkungen sind mittlerweile zuganglich. Die nachste Stufe ist die chemische und physikalische Funktionalisierung dieser Architekturen durch Einstellung ihrer Porositaten. Dieser Aufsatz konzentriert sich auf drei Aspekte von Koordinationspolymeren: 1) Anwendung von Kristall-Engineering zum Aufbau poroser Geruste aus Konnektoren und Linkern (“Nanospace-Engineering”), 2) Charakterisierung und Katalogisierung poros-struktureller Funktionalitat fur Anwendungen in Speicherungs-, Austausch-, Trennprozessen etc. und 3) poros-strukturelle Funktionalitat auf der Basis dynamischer Kristallumwandlungen durch Gastmolekule oder physikalische Reize. Ziel ist es, den aktuellen Stand der Forschung zur Chemie und Physik von und in den Mikroporen poroser Koordinationspolymere vorzustellen.

Framework Engineering by Anions and Porous Functionalities of Cu(II)/4,4‘-bpy Coordination Polymers

Abstract: A combination of framework-builder (Cu(II) ion and 4,4'-bipyridine (4,4'-bpy) ligand) and framework-regulator (AF(6) type anions; A = Si, Ge, and P) provides a series of novel porous coordination polymers. The highly porous coordination polymers ([Cu(AF(6))(4,4'-bpy)(2)].8H(2)O)(n)(A = Si (1a.8H(2)O), Ge (2a.8H(2)O)) afford robust 3-dimensional (3-D), microporous networks (3-D Regular Grid) by using AF(6)(2-) anions. The channel size of these complexes is ca. 8 x 8 A(2) along the c-axis and 6 x 2 A(2) along the a- or b-axes. When compounds 1a.8H(2)O or 2a.8H(2)O were immersed in water, a conversion of 3-D networks (1a.8H(2)O or 2a.8H(2)O) to interpenetrated networks ([Cu(4,4'-bpy)(2)(H(2)O)(2)].AF(6))(n)(A = Si (1b) and Ge (2b)) (2-D Interpenetration) took place. This 2-D interpenetrated network 1b shows unique dynamic anion-exchange properties, which accompany drastic structural conversions. When a PF(6)(-) monoanion instead of AF(6)(2)(-) dianions was used as the framework-regulator with another co-counteranion (coexistent anions), porous coordination polymers with various types of frameworks, ([Cu(2)(4,4'-bpy)(5)(H(2)O)(4)].anions.2H(2)O.4EtOH)(n)(anions = 4PF(6)(-) (3.2H(2)O.4EtOH), 2PF(6)(-) + 2ClO(4)(-) (4.2H(2)O.4EtOH)) (2-D Double-Layer), ([Cu(2)(PF(6))(NO(3))(4,4'-bpy)(4)].2PF(6).2H(2)O)(n)(5.2PF(6).2H(2)O) (3-D Undulated Grid), ([Cu(PF(6))(4,4'-bpy)(2)(MeCN)].PF(6).2MeCN)(n)(6.2MeCN) (2-D Grid), and ([Cu(4,4'-bpy)(2)(H(2)O)(2)].PF(6).BF(4))(n) (7) (2-D Grid), were obtained, where the three modes of PF(6)(-) anions are observed. 5.2PF(6).2H(2)O has rare PF(6)(-) bridges. The PF(6)(-) and NO(3)(-) monoanions alternately link to the Cu(II) centers in the undulated 2-D sheets of [Cu(4,4'-bpy)(2)](n)() to form a 3-D porous network. The free PF(6)(-) anions are included in the channels. 6.2MeCN affords both free and terminal-bridged PF(6)(-) anions. 3.2H(2)O.4EtOH, 4.2H(2)O.4EtOH, and 7 bear free PF(6)(-) anions. All of the anions in 3.2H(2)O.4EtOH and 4.2H(2)O.4EtOH are freely located in the channels constructed from a host network. Interestingly, these Cu(II) frameworks are rationally controlled by counteranions and selectively converted to other frameworks.

The Chemistry and Applications of Metal-Organic Frameworks

Abstract: Crystalline metal-organic frameworks (MOFs) are formed by reticular synthesis, which creates strong bonds between inorganic and organic units. Careful selection of MOF constituents can yield crystals of ultrahigh porosity and high thermal and chemical stability. These characteristics allow the interior of MOFs to be chemically altered for use in gas separation, gas storage, and catalysis, among other applications. The precision commonly exercised in their chemical modification and the ability to expand their metrics without changing the underlying topology have not been achieved with other solids. MOFs whose chemical composition and shape of building units can be multiply varied within a particular structure already exist and may lead to materials that offer a synergistic combination of properties.

Reticular synthesis and the design of new materials

Abstract: The long-standing challenge of designing and constructing new crystalline solid-state materials from molecular building blocks is just beginning to be addressed with success. A conceptual approach that requires the use of secondary building units to direct the assembly of ordered frameworks epitomizes this process: we call this approach reticular synthesis. This chemistry has yielded materials designed to have predetermined structures, compositions and properties. In particular, highly porous frameworks held together by strong metal-oxygen-carbon bonds and with exceptionally large surface area and capacity for gas storage have been prepared and their pore metrics systematically varied and functionalized.

Selective gas adsorption and separation in metal–organic frameworks

Abstract: Adsorptive separation is very important in industry. Generally, the process uses porous solid materials such as zeolites, activated carbons, or silica gels as adsorbents. With an ever increasing need for a more efficient, energy-saving, and environmentally benign procedure for gas separation, adsorbents with tailored structures and tunable surface properties must be found. Metal–organic frameworks (MOFs), constructed by metal-containing nodes connected by organic bridges, are such a new type of porous materials. They are promising candidates as adsorbents for gas separations due to their large surface areas, adjustable pore sizes and controllable properties, as well as acceptable thermal stability. This critical review starts with a brief introduction to gas separation and purification based on selective adsorption, followed by a review of gas selective adsorption in rigid and flexible MOFs. Based on possible mechanisms, selective adsorptions observed in MOFs are classified, and primary relationships between adsorption properties and framework features are analyzed. As a specific example of tailor-made MOFs, mesh-adjustable molecular sieves are emphasized and the underlying working mechanism elucidated. In addition to the experimental aspect, theoretical investigations from adsorption equilibrium to diffusion dynamics via molecular simulations are also briefly reviewed. Furthermore, gas separations in MOFs, including the molecular sieving effect, kinetic separation, the quantum sieving effect for H2/D2 separation, and MOF-based membranes are also summarized (227 references).