S. Ariyavisitakul

Bio: S. Ariyavisitakul is an academic researcher from AT&T. The author has contributed to research in topics: Broadband networks & Wireless. The author has an hindex of 9, co-authored 9 publications receiving 1299 citations. Previous affiliations of S. Ariyavisitakul include Bell Labs.

Channel estimation for OFDM systems with transmitter diversity in mobile wireless channels

Abstract: Transmitter diversity is an effective technique to improve wireless communication performance. In this paper, we investigate transmitter diversity using space-time coding for orthogonal frequency division multiplexing (OFDM) systems in high-speed wireless data applications. We develop channel parameter estimation approaches, which are crucial for the decoding of the space-time codes, and we derive the MSE bounds of the estimators. The overall receiver performance using such a transmitter diversity scheme is demonstrated by extensive computer simulations. For an OFDM system with two transmitter antennas and two receiver antennas with transmission efficiency as high as 1.475 bits/s/Hz, the required signal-to-noise ratio is only about 7 dB for a 1% bit error rate and 9 dB for a 10% word error rate assuming channels with two-ray, typical urban, and hilly terrain delay profiles, and a 40-Hz Doppler frequency. In summary, with the proposed channel estimator, combining OPDM with transmitter diversity using space-time coding is a promising technique for highly efficient data transmission over mobile wireless channels.

Reduced-complexity equalization techniques for broadband wireless channels

Abstract: This paper presents reduced-complexity equalization techniques for broadband wireless communications, both outdoors (fixed or mobile wireless asynchronous transfer mode (ATM) networks) and indoors [high-speed local-area networks (LANs)]. The two basic equalization techniques investigated are decision-feedback equalization (FE) and delayed decision-feedback sequence estimation (DDFSE). We consider the use of these techniques in highly dispersive channels, where the impulse response can last up to 100 symbol periods. The challenge is in minimizing the complexity as well as providing fast equalizer start-up for transmissions of short packets. We propose two techniques which, taken together, provide an answer to this challenge. One is an open-loop timing recovery approach (for both DFE and DDFSE) which can be executed prior to equalization; the other is a modified DFE structure for precanceling postcursors without requiring training of the feedback filter. Simulation results are presented to demonstrate the feasibility of the proposed techniques for both indoor and outdoor multipath channel models. The proposed open-loop timing recovery technique plays a crucial role in maximizing the performance of DFE and DDFSE with short feedforward spans (the feedforward section of DDFSE is a Viterbi sequence estimator). A feedforward span of only five is quite sufficient for channels with symbol rate-delay spread products approaching 100. The modified DFE structure speeds up the training process for these channels by 10-20 times, compared to the conventional structure without postcursor precancellation. The proposed techniques offer the possibility of practical equalization for broadband wireless systems.

Joint coding and decision feedback equalization for broadband wireless channels

Abstract: This paper introduces a new approach for joint convolutional coding and decision feedback equalization (DPE). To minimize error propagation, the DFE uses a combination of soft decisions and delayed tentative decisions to cancel intersymbol interference (ISI). Soft decisions are obtained by passing the DFE output through a (soft) nonlinear device. This simple method is shown to perform almost as well as an optimum soft feedback approach on wireless channels with diversity. Tentative decisions from the Viterbi decoder are used to cancel ISI due to multipath with large delays, thus remedying the increasing effect of error propagation in channels with large delay spreads. We consider the use of this soft/delayed feedback DFE (S/D-DFE) technique in broadband wireless channels (with delay spreads up to several tens of the symbol period) typical in high-bitrate mobile data applications. Simulation results indicate that the proposed joint coding and S/D-DFE technique performs to within 1-2 dB [in required signal-to-noise ratio (SNR)] of an ideal coded DFE without error propagation. When combined with antenna diversity and a reduced-complexity DFE concept with adaptive feedforward tap assignment, it provides high packet throughput against Rayleigh fading, severe delay spreads, and high Doppler rates.

Joint coding and decision feedback equalization for broadband wireless channels

Abstract: This paper introduces a new approach for joint convolutional coding and decision feedback equalization (DFE). To minimize error propagation, the DFE uses a combination of soft decisions and delayed tentative decisions to cancel intersymbol interference (ISI). Soft decisions are obtained by passing the DFE output through a (soft) nonlinear device. This simple method is shown to perform almost as well as an optimum soft feedback approach on wireless channels with diversity. Tentative decisions from the Viterbi decoder are used to cancel ISI due to multipath with large delays, thus remedying the increasing effect of error propagation in channels with large delay spreads. We consider the use of this soft/delayed feedback DFE (S/D-DPE) technique in broadband wireless channels (with delay spreads up to several tens of the symbol period) typical in high-bit-rate mobile data applications. Simulation results indicate that the proposed joint coding and S/D-DFE technique performs to within 1 to 2 dB (in required SNR) of an ideal coded DFE without error propagation. When combined with antenna diversity and a reduced-complexity DFE concept with adaptive feedforward tap assignment, it provides high packet throughput against Rayleigh fading, severe delay spreads, and high Doppler rates.

Performance of simulcast wireless techniques for personal communication systems

Abstract: Broadband analog transport facilities using fiber or fiber/coax cable can play a significant role in the evolution of the network infrastructure for personal communications services (PCSs). Low-power PCS systems require a dense grid of radio ports to provide connectivity to the telephone network. Analog transport has a number of important advantages over digital transmission facilities, including the flexibility to support a variety of air interface formats, shared infrastructure cost with other services such as video distribution, and centralized call processing allowing the use of low cost and simple radio ports. A simulcast technique can be used in such systems to permit low rates of handoff (no handoff within each simulcast area) and sharing of hardware resources among multiple radio ports. This paper provides a detailed model and a simulation analysis of the cochannel interference and noise performance as well as the resource sharing benefit of a simulcast PCS system. Several potential PCS air interfaces are considered, including time division multiple access (TDMA) and code division multiple access (CDMA) techniques. Our investigation shows that the impact of multiple antenna noise in a simulcast system is offset by the improved signal-to-interference (SIR) ratio brought about by distributed antennas. Even with distributed antennas, multiple antenna noise places a limit on the maximum number of radio ports that can be assigned to each simulcast group. This limit, however, is shown to have little impact on the achievable resource sharing benefit of simulcasting (i.e., grouping beyond this limit has diminishing returns). A saving of 40% to 60%, in terms of the required central hardware resources, is typical for both TDMA and CDMA systems in suburban environments.

On the capacity of a cellular CDMA system

Abstract: It is shown that, particularly for terrestrial cellular telephony, the interference-suppression feature of CDMA (code division multiple access) can result in a many-fold increase in capacity over analog and even over competing digital techniques. A single-cell system, such as a hubbed satellite network, is addressed, and the basic expression for capacity is developed. The corresponding expressions for a multiple-cell system are derived. and the distribution on the number of users supportable per cell is determined. It is concluded that properly augmented and power-controlled multiple-cell CDMA promises a quantum increase in current cellular capacity. >

Frequency domain equalization for single-carrier broadband wireless systems

Abstract: Broadband wireless access systems deployed in residential and business environments are likely to face hostile radio propagation environments, with multipath delay spread extending over tens or hundreds of bit intervals. Orthogonal frequency-division multiplex (OFDM) is a recognized multicarrier solution to combat the effects of such multipath conditions. This article surveys frequency domain equalization (FDE) applied to single-carrier (SC) modulation solutions. SC radio modems with frequency domain equalization have similar performance, efficiency, and low signal processing complexity advantages as OFDM, and in addition are less sensitive than OFDM to RF impairments such as power amplifier nonlinearities. We discuss similarities and differences of SC and OFDM systems and coexistence possibilities, and present examples of SC-FDE performance capabilities.

Broadband MIMO-OFDM wireless communications

Abstract: Orthogonal frequency division multiplexing (OFDM) is a popular method for high data rate wireless transmission. OFDM may be combined with antenna arrays at the transmitter and receiver to increase the diversity gain and/or to enhance the system capacity on time-varying and frequency-selective channels, resulting in a multiple-input multiple-output (MIMO) configuration. The paper explores various physical layer research challenges in MIMO-OFDM system design, including physical channel measurements and modeling, analog beam forming techniques using adaptive antenna arrays, space-time techniques for MIMO-OFDM, error control coding techniques, OFDM preamble and packet design, and signal processing algorithms used to perform time and frequency synchronization, channel estimation, and channel tracking in MIMO-OFDM systems. Finally, the paper considers a software radio implementation of MIMO-OFDM.

Turbo equalization: principles and new results

Abstract: We study the turbo equalization approach to coded data transmission over channels with intersymbol interference. In the original system invented by Douillard et al. (1995), the data are protected by a convolutional code and the receiver consists of two trellis-based detectors, one for the channel (the equalizer) and one for the code (the decoder). It has been shown that iterating equalization and decoding tasks can yield tremendous improvements in bit error rate. We introduce new approaches to combining equalization based on linear filtering, with decoding.. Through simulation and analytical results, we show that the performance of the new approaches is similar to the trellis-based receiver, while providing large savings in computational complexity. Moreover, this paper provides an overview of the design alternatives for turbo equalization with given system parameters, such as the channel response or the signal-to-noise ratio.

On the capacity of OFDM-based spatial multiplexing systems

Abstract: This paper deals with the capacity behavior of wireless orthogonal frequency-division multiplexing (OFDM)-based spatial multiplexing systems in broad-band fading environments for the case where the channel is unknown at the transmitter and perfectly known at the receiver Introducing a physically motivated multiple-input multiple-output (MIMO) broad-band fading channel model, we study the influence of physical parameters such as the amount of delay spread, cluster angle spread, and total angle spread, and system parameters such as the number of antennas and antenna spacing on ergodic capacity and outage capacity We find that, in the MIMO case, unlike the single-input single-output (SISO) case, delay spread channels may provide advantages over flat fading channels not only in terms of outage capacity but also in terms of ergodic capacity Therefore, MIMO delay spread channels will in general provide both higher diversity gain and higher multiplexing gain than MIMO flat fading channels