S. Armstrong

Bio: S. Armstrong is an academic researcher from University College Cork. The author has contributed to research in topics: Photovoltaic system & Wave farm. The author has an hindex of 9, co-authored 14 publications receiving 983 citations. Previous affiliations of S. Armstrong include National University of Ireland, Galway.

A stand-alone photovoltaic supercapacitor battery hybrid energy storage system

Abstract: Most of the stand-alone photovoltaic (PV) systems require an energy storage buffer to supply continuous energy to the load when there is inadequate solar irradiation. Typically, Valve Regulated Lead Acid (VRLA) batteries are utilized for this application. However, supplying a large burst of current, such as motor startup, from the battery degrades battery plates, resulting in destruction of the battery. An alterative way of supplying large bursts of current is to combine VRLA batteries and supercapacitors to form a hybrid storage system, where the battery can supply continuous energy and the supercapacitor can supply the instant power to the load. In this paper, the role of the supercapacitor in a PV energy control unit (ECU) is investigated by using Matlab/Simulink models. The ECU monitors and optimizes the power flow from the PV to the battery-supercapacitor hybrid and the load. Three different load conditions are studied, including a peak current load, pulsating current load and a constant current load. The simulation results show that the hybrid storage system can achieve higher specific power than the battery storage system.

Comparison of battery charging algorithms for stand alone photovoltaic systems

Abstract: The battery is the most common method of energy storage in stand alone solar systems; the most popular being the valve regulated lead acid battery (VRLA) due to its low cost and ease of availability. Photovoltaics are not an ideal source for charging batteries as their output is heavily dependent on weather conditions. Therefore, when batteries are used in photovoltaic systems, the performance characteristics differ significantly from batteries used in more traditional applications and the battery life is usually shortened. In conditions of varying solar radiation and load profile the battery may experience a low state of charge (SOC). A low SOC for extended periods of time will cause increased sulphation, which severely reduces the life of the battery. Typically, steps are carried out to protect the battery and to charge the battery more effectively. Such methods include intermittent charging (IC), three stage charging (TSC) and interrupted charge control (ICC), among others. This paper quantifies the effectiveness of these three battery charging algorithms and evaluates their ability to maintain the battery at a high state of charge. The measurement setup is comprised of a solar simulator, which replicates the output of a large 50 W photovoltaic panel using a low power cell. Repeatable load and solar radiation profiles and temperature control are implemented using LabView so that identical operating conditions can be set up to compare the three battery charging systems.

Investigating the Effectiveness of Maximum Power Point Tracking for a Solar System

Abstract: This paper investigates the effectiveness of maximum power point tracking (MPPT) and proposes a quantitative measure of MPPT efficiency. Using a vector methodology to track the direction and path of the sun throughout the day, the optimal solar tracking angle and angle of incidence of the sun's rays are derived. The solar array's output power is monitored, under sunny sky conditions, with and without the use of maximum power point tracking in order to study the difference in efficiencies and to quantify the benefits of maximum power point tracking. The paper presents results for the efficiency of MPPT under fixed horizontal solar panel conditions and optimal solar tracking

Ultracapacitors: Why, How, and Where is the Technology

Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

Energy Management and Operational Planning of a Microgrid With a PV-Based Active Generator for Smart Grid Applications

Abstract: The development of energy management tools for next-generation PhotoVoltaic (PV) installations, including storage units, provides flexibility to distribution system operators. In this paper, the aggregation and implementation of these determinist energy management methods for business customers in a microgrid power system are presented. This paper proposes a determinist energy management system for a microgrid, including advanced PV generators with embedded storage units and a gas microturbine. The system is organized according to different functions and is implemented in two parts: a central energy management of the microgrid and a local power management at the customer side. The power planning is designed according to the prediction for PV power production and the load forecasting. The central and local management systems exchange data and order through a communication network. According to received grid power references, additional functions are also designed to manage locally the power flows between the various sources. Application to the case of a hybrid supercapacitor battery-based PV active generator is presented.

Composite Energy Storage System Involving Battery and Ultracapacitor With Dynamic Energy Management in Microgrid Applications

Abstract: Renewable-energy-based microgrids are a better way of utilizing renewable power and reduce the usage of fossil fuels. Usage of energy storage becomes mandatory when such microgrids are used to supply quality power to the loads. Microgrids have two modes of operation, namely, grid-connected and islanding modes. During islanding mode, the main responsibility of the storage is to perform energy balance. During grid-connected mode, the goal is to prevent propagation of the renewable source intermittency and load fluctuations to the grid. Energy storage of a single type cannot perform all these jobs efficiently in a renewable powered microgrid. The intermittent nature of renewable energy sources like photovoltaic (PV) demands usage of storage with high energy density. At the same time, quick fluctuation of load demands storage with high power density. This paper proposes a composite energy storage system (CESS) that contains both high energy density storage battery and high power density storage ultracapacitor to meet the aforementioned requirements. The proposed power converter configuration and the energy management scheme can actively distribute the power demand among the different energy storages. Results are presented to show the feasibility of the proposed scheme.

Engineering three-dimensional hybrid supercapacitors and microsupercapacitors for high-performance integrated energy storage

Abstract: Supercapacitors now play an important role in the progress of hybrid and electric vehicles, consumer electronics, and military and space applications. There is a growing demand in developing hybrid supercapacitor systems to overcome the energy density limitations of the current generation of carbon-based supercapacitors. Here, we demonstrate 3D high-performance hybrid supercapacitors and microsupercapacitors based on graphene and MnO2 by rationally designing the electrode microstructure and combining active materials with electrolytes that operate at high voltages. This results in hybrid electrodes with ultrahigh volumetric capacitance of over 1,100 F/cm3. This corresponds to a specific capacitance of the constituent MnO2 of 1,145 F/g, which is close to the theoretical value of 1,380 F/g. The energy density of the full device varies between 22 and 42 Wh/l depending on the device configuration, which is superior to those of commercially available double-layer supercapacitors, pseudocapacitors, lithium-ion capacitors, and hybrid supercapacitors tested under the same conditions and is comparable to that of lead acid batteries. These hybrid supercapacitors use aqueous electrolytes and are assembled in air without the need for expensive “dry rooms” required for building today’s supercapacitors. Furthermore, we demonstrate a simple technique for the fabrication of supercapacitor arrays for high-voltage applications. These arrays can be integrated with solar cells for efficient energy harvesting and storage systems.