scispace - formally typeset
Search or ask a question
Author

S. Das

Bio: S. Das is an academic researcher from Advanced Materials and Processes Research Institute. The author has contributed to research in topics: Aluminium alloy & Strain rate. The author has an hindex of 20, co-authored 42 publications receiving 1147 citations.

Papers
More filters
Journal ArticleDOI
09 Sep 2009-Wear
TL;DR: In this article, the results of dry sliding wear tests of aluminium alloy (Al-Zn-Mg) and aluminium (Al−Zn−Mg)-10, 15 and 25 wt.% SiCp composite was examined under varying applied pressure (0.2 to 2.0 MPa) at a fixed sliding speed of 3.35 m/s.

109 citations

Journal ArticleDOI
TL;DR: In this paper, the sliding wear behavior of cenosphere reinforced aluminum syntactic foam has been studied using a pin-on-disc apparatus at load range of 1-5 kg and sliding velocity of 2-4m/s.

81 citations

Journal ArticleDOI
TL;DR: In this paper, the deformation behavior of closed cell aluminum-fly ash composite foam of varying relative densities (0.08-0.13) was studied at varying strain rate (10−2−101 s−1).

79 citations

Journal ArticleDOI
TL;DR: In this paper, the effect of heat treatment on the sliding wear behavior of aluminium alloy hard particle composite was studied under varying applied load and sliding speed, giving emphasis on the parameters such as wear rate, temperature rise, coefficient of friction and seizure pressure.

78 citations

Journal ArticleDOI
TL;DR: The sliding wear behavior of cenosphere-filled aluminum syntactic foam (ASF) has been studied in comparison with that of 10% SiC particle reinforced aluminum matrix composite (AMC) at a load of 3 kg and varying sliding speeds under dry and lubricated conditions using a pin-on disc test apparatus as mentioned in this paper.

73 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

Journal ArticleDOI
01 Jul 2012-Fuel
TL;DR: In this paper, the potential applications for coal fly ash as a raw material were reviewed. And the authors found that there is significant potential for the increased utilisation of coal fly-ash both in its raw and refined state.

879 citations

Journal ArticleDOI
TL;DR: In this article, the influence of graphite on the wear behavior of Al 7075/Al 2 O 3 /5.% graphite hybrid composite was investigated and the results revealed the effectiveness of incorporating graphite in the composite for gaining wear reduction.
Abstract: This work investigated the influence of graphite on the wear behavior of Al 7075/Al 2 O 3 /5 wt.% graphite hybrid composite. The investigation reveals the effectiveness of incorporation of graphite in the composite for gaining wear reduction. The Al 7075 (aluminium alloy 7075) reinforced with Al 2 O 3 –graphite were investigated. The composites were fabricated using liquid metallurgy route. Ceramic particles along with solid lubricating materials were incorporated into aluminium alloy matrix to accomplish reduction in both wear resistance and coefficient of friction. The Al 7075/Al 2 O 3 /graphite hybrid composite was prepared with 5 wt.% graphite particles addition and 2, 4, 6 and 8 wt.% of Al 2 O 3 . The hardness, tensile strength, flexural strength and compression strength of the Al 7075–Al 2 O 3 –graphite hybrid composites are found to be increased by increased weight percentage of ceramic phase. The wear properties of the hybrid composites containing graphite exhibited the superior wear-resistance properties.

468 citations

Journal ArticleDOI
TL;DR: In this article, the worn surfaces of hybrid composites and base alloys were studied through SEM and EDS systems and some useful conclusions were made by using a pin-on-disc apparatus with various input parameters like applied load (10, 20, and 30 n), sliding speed (0.6, 0.8, and 1.0 n), and sliding distance (1000, 1500, and 2000 m).

252 citations

Journal ArticleDOI
TL;DR: Definition du genre et des especes, distribution dans la nature, croissance et nutrition, physiologie and metabolisme, sensibilite aux antimicrobiens et antibiotiques, destruction par les produits chimiques, conservation, structure et fonctions (trophozoites).

225 citations