Past, present and future of nonlinear system identification in structural dynamics

A survey of nonlinear system identification algorithms and related topics is presented by extracting significant results from the literature and presenting these in an organised and systematic way. Algorithms based on the functional expansions of Wiener and Volterra, the identification of block-oriented and bilinear systems, the selection of input signals, structure detection, parameter estimation and recent results from catastrophe theory and included. The limitations, relationships and applicability of the methods are discussed throughout.

Identification of Nonlinear Systems- A Survey

Analytical modeling of communication receivers to account for their nonlinear response to multiple input signals is discussed. The method is based on the application of the Wiener-Volterra analysis of nonlinear functionals. The derived analytical relations were embodied in a computer program which provides nonlinear transfer functions of large circuits specified by their parameters. This method was applied to the prediction of behavior of communication receivers in the presence of interference. Examples illustrate the method and demonstrate its validity in the small-signal region.

Analysis of nonlinear systems with multiple inputs

Preface. About the Authors. Acknowledgments. 1 Power Amplifier Fundamentals. 1.1 Introduction. 1.2 Definition of Power Amplifier Parameters. 1.3 Distortion Parameters. 1.4 Power Match Condition. 1.5 Class of Operation. 1.6 Overview of Semiconductors for PAs. 1.7 Devices for PA. 1.8 Appendix: Demonstration of Useful Relationships. 1.9 References. 2 Power Amplifier Design. 2.1 Introduction. 2.2 Design Flow. 2.3 Simplified Approaches. 2.4 The Tuned Load Amplifier. 2.5 Sample Design of a Tuned Load PA. 2.6 References. 3 Nonlinear Analysis for Power Amplifiers. 3.1 Introduction. 3.2 Linear vs. Nonlinear Circuits. 3.3 Time Domain Integration. 3.4 Example. 3.5 Solution by Series Expansion. 3.6 The Volterra Series. 3.7 The Fourier Series. 3.8 The Harmonic Balance. 3.9 Envelope Analysis. 3.10 Spectral Balance. 3.11 Large Signal Stability Issue. 3.12 References. 4 Load Pull. 4.1 Introduction. 4.2 Passive Source/Load Pull Measurement Systems. 4.3 Active Source/Load Pull Measurement Systems. 4.4 Measurement Test-sets. 4.5 Advanced Load Pull Measurements. 4.6 Source/Load Pull Characterization. 4.7 Determination of Optimum Load Condition. 4.8 Appendix: Construction of Simplified Load Pull Contours through Linear Simulations. 4.9 References. 5 High Efficiency PA Design Theory. 5.1 Introduction. 5.2 Power Balance in a PA. 5.3 Ideal Approaches. 5.4 High Frequency Harmonic Tuning Approaches. 5.5 High Frequency Third Harmonic Tuned (Class F). 5.6 High Frequency Second Harmonic Tuned. 5.7 High Frequency Second and Third Harmonic Tuned. 5.8 Design by Harmonic Tuning. 5.9 Final Remarks. 5.10 References. 6 Switched Amplifiers. 6.1 Introduction. 6.2 The Ideal Class E Amplifier. 6.3 Class E Behavioural Analysis. 6.4 Low Frequency Class E Amplifier Design. 6.5 Class E Amplifier Design with 50# Duty-cycle. 6.6 Examples of High Frequency Class E Amplifiers. 6.7 Class E vs. Harmonic Tuned. 6.8 Class E Final Remarks. 6.9 Appendix: Demonstration of Useful Relationships. 6.10 References. 7 High Frequency Class F Power Amplifiers. 7.1 Introduction. 7.2 Class F Description Based on Voltage Wave-shaping. 7.3 High Frequency Class F Amplifiers. 7.4 Bias Level Selection. 7.5 Class F Output Matching Network Design. 7.6 Class F Design Examples. 7.7 References. 8 High Frequency Harmonic Tuned Power Amplifiers. 8.1 Introduction. 8.2 Theory of Harmonic Tuned PA Design. 8.3 Input Device Nonlinear Phenomena: Theoretical Analysis. 8.4 Input Device Nonlinear Phenomena: Experimental Results. 8.5 Output Device Nonlinear Phenomena. 8.6 Design of a Second HT Power Amplifier. 8.7 Design of a Second and Third HT Power Amplifier. 8.8 Example of 2nd HT GaN PA. 8.9 Final Remarks. 8.10 References. 9 High Linearity in Efficient Power Amplifiers. 9.1 Introduction. 9.2 Systems Classification. 9.3 Linearity Issue. 9.4 Bias Point Influence on IMD. 9.5 Harmonic Loading Effects on IMD. 9.6 Appendix: Volterra Analysis Example. 9.7 References. 10 Power Combining. 10.1 Introduction. 10.2 Device Scaling Properties. 10.3 Power Budget. 10.4 Power Combiner Classification. 10.5 The T-junction Power Divider. 10.6 Wilkinson Combiner. 10.7 The Quadrature (90 ) Hybrid. 10.8 The 180 Hybrid (Ring Coupler or Rat-race). 10.9 Bus-bar Combiner. 10.10 Other Planar Combiners. 10.11 Corporate Combiners. 10.12 Resonating Planar Combiners. 10.13 Graceful Degradation. 10.14 Matching Properties of Combined PAs. 10.15 Unbalance Issue in Hybrid Combiners. 10.16 Appendix: Basic Properties of Three-port Networks. 10.17 References. 11 The Doherty Power Amplifier. 11.1 Introduction. 11.2 Doherty's Idea. 11.3 The Classical Doherty Configuration. 11.4 The 'AB-C' Doherty Amplifier Analysis. 11.5 Power Splitter Sizing. 11.6 Evaluation of the Gain in a Doherty Amplifier. 11.7 Design Example. 11.8 Advanced Solutions. 11.9 References. Index.

/pdf/high-efficiency-rf-and-microwave-solid-state-power-4xdx1261hq.pdf

High Efficiency RF and Microwave Solid State Power Amplifiers

An analytical solution to the problem of modeling bandpass nonlinear channels and evaluating the performance of digital communication systems operating on them is presented. A method based on a Volterra series representation of the overall channel is first proposed, which allows one to extend to nonlinearities with memory the well-known concepts of complex envelope of bandpass signals and low-pass equivalent of bandpass linear systems. The general results previously mentioned are then applied to digital satellite communication systems operating over nonlinear channels. The effect of a nonlinear amplifier located in the satellite is considered, in combination with that of transmitting and receiving filters located in the Earth stations. In addition, both uplink and downlink noise are taken into account. Basic advantages of this approach are the generality it offers to the analysis and the fact that it allows accurate evaluation of the error probability in a short computer time.

Modeling and Performance Evaluation of Nonlinear Satellite Links-A Volterra Series Approach

Troublesome distortions often occur in communication systems. For a wide class of systems such distortions can be computed with the help of Volterra series. Results, both old and new, which will aid the reader in applying Volterra-series-type analyses to systems driven by sine waves or Gaussian noise are presented. The n-fold Fourier transform G n of the nth Volterra kernel plays an important role in the analysis. Methods of computing G n from the system equations are described and several special systems are considered. When the G n are known, items of interest regarding the output can be obtained by substituting the G n in general formulas derived from the Volterra series representation. These items include expressions for the output harmonics, when the input is the sum of two or three sine waves, and the power spectrum and various moments, when the input is Gaussian. Special attention is paid to the case in which the Volterra series consists of only the linear and quadratic terms.

S.O. Rice

Papers

The output properties of Volterra systems (nonlinear systems with memory) driven by harmonic and Gaussian inputs