scispace - formally typeset
Search or ask a question
Author

S. P. Stark

Bio: S. P. Stark is an academic researcher from Max Planck Society. The author has contributed to research in topics: Photonic-crystal fiber & Supercontinuum. The author has an hindex of 13, co-authored 32 publications receiving 523 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: The pressure-assisted melt-filling approach makes it possible to realize highly nonlinear devices with unusual combinations of materials, and it is shown numerically that a 1 cm long As2S3:silica step-index fiber with a core diameter of 1 µm, pumped by 60 fs pulses at 1550 nm, would generate a broadband supercontinuum out to 4 µm.
Abstract: We explore the use of a highly nonlinear chalcogenide-silica waveguide for supercontinuum generation in the near infrared. The structure was fabricated by a pressure-assisted melt-filling of a silica capillary fiber (1.6 µm bore diameter) with Ga4Ge21Sb10S65 glass. It was designed to have zero group velocity dispersion (for HE11 core mode) at 1550 nm. Pumping a 1 cm length with 60 fs pulses from an erbium-doped fiber laser results in the generation of octave-spanning supercontinuum light for pulse energies of only 60 pJ. Good agreement is obtained between the experimental results and theoretical predictions based on numerical solutions of the generalized nonlinear Schrodinger equation. The pressure-assisted melt-filling approach makes it possible to realize highly nonlinear devices with unusual combinations of materials. For example, we show numerically that a 1 cm long As2S3:silica step-index fiber with a core diameter of 1 µm, pumped by 60 fs pulses at 1550 nm, would generate a broadband supercontinuum out to 4 µm.

136 citations

Journal ArticleDOI
TL;DR: Pumping a sharply tapered solid-core photonic crystal fiber with 130 fs, 2 nJ pulses at 800 nm generates an efficient supercontinuum down to a record-breaking 280 nm in the deep-UV.
Abstract: We report the formation of an ultrabroad supercontinuum down to 280 nm in the deep UV by pumping sharply tapered (5-30 mm taper lengths) solid-core photonic crystal fibers with 130 fs, 2 nJ pulses at 800 nm. The taper moves the point of soliton fission to a position where the core is narrower, a process that requires normal dispersion at the input face of the fiber. We find that the generation of deep-UV radiation is limited by strong two-photon absorption in the silica.

64 citations

Journal ArticleDOI
TL;DR: In this article, the authors investigate numerically and experimentally the propagation of visible sub-50 fs pulses in a tapered small core photonic crystal fiber and find that the spectral evolution in the low power regime is dominated by higher-order soliton fission, soliton self-frequency shift, and dispersive wave generation.
Abstract: We investigate numerically and experimentally the propagation of visible sub-50 fs pulses in a tapered small core photonic crystal fiber. The fiber has anomalous dispersion between two closely spaced zero dispersion wavelengths at 509 and 640 nm, and the excitation wavelength was varied within this range. We find that the spectral evolution in the low power regime is dominated by higher-order soliton fission, soliton self-frequency shift, and dispersive wave generation. At higher powers, extremely wide spectral broadening of the input pulse occurs within the first few millimeters of fiber. The wavelength conversion into the blue and red spectral ranges is studied as a function of the input power and excitation wavelength. Conversions into the spectral range 300-470 nm at efficiencies as high as 40% are observed when pumping at 523 nm.

45 citations

Journal ArticleDOI
TL;DR: In this paper, a simple single-mode photonic crystal fiber can be designed to yield, not just two, but three zero-dispersion wavelengths, enabling enhanced control over the spectral locations of the four-wave mixing and resonant-radiation bands emitted by solitons and short pulses.
Abstract: In this theoretical study, we show that a simple endlessly single-mode photonic crystal fiber can be designed to yield, not just two, but three zero-dispersion wavelengths. The presence of a third dispersion zero creates a rich phase-matching topology, enabling enhanced control over the spectral locations of the four-wave-mixing and resonant-radiation bands emitted by solitons and short pulses. The greatly enhanced flexibility in the positioning of these bands has applications in wavelength conversion, supercontinuum generation, and pair-photon sources for quantum optics.

41 citations

Journal ArticleDOI
TL;DR: It is demonstrated analytically and numerically that a subwavelength-core dielectric photonic nanowire embedded in a properly designed photonic crystal fiber cladding shows evidence of a previously unknown kind of nonlinearity which acts on solitons so as to considerably reduce their Raman self-frequency shift.
Abstract: We demonstrate analytically and numerically that a subwavelength-core dielectric photonic nanowire embedded in a properly designed photonic crystal fiber cladding shows evidence of a previously unknown kind of nonlinearity (the magnitude of which is strongly dependent on the waveguide parameters) which acts on solitons so as to considerably reduce their Raman self-frequency shift. An explanation of the phenomenon in terms of indirect pulse negative chirping and broadening is given by using the moment method. Our conclusions are supported by detailed numerical simulations.

35 citations


Cited by
More filters
01 Jan 2002
TL;DR: In this article, a review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime.
Abstract: A topical review of numerical and experimental studies of supercontinuum generation in photonic crystal fiber is presented over the full range of experimentally reported parameters, from the femtosecond to the continuous-wave regime. Results from numerical simulations are used to discuss the temporal and spectral characteristics of the supercontinuum, and to interpret the physics of the underlying spectral broadening processes. Particular attention is given to the case of supercontinuum generation seeded by femtosecond pulses in the anomalous group velocity dispersion regime of photonic crystal fiber, where the processes of soliton fission, stimulated Raman scattering, and dispersive wave generation are reviewed in detail. The corresponding intensity and phase stability properties of the supercontinuum spectra generated under different conditions are also discussed.

360 citations

Journal ArticleDOI
TL;DR: This review takes a tutorial approach to illustrate how 20 years of source development and technology has facilitated the journey of optical frequency combs from the lab into the field, and a view to the future with these technologies.
Abstract: Optical frequency combs were developed nearly two decades ago to support the world’s most precise atomic clocks. Acting as precision optical synthesizers, frequency combs enable the precise transfer of phase and frequency information from a high-stability reference to hundreds of thousands of tones in the optical domain. This versatility, coupled with near-continuous spectroscopic coverage from microwave frequencies to the extreme ultra-violet, has enabled precision measurement capabilities in both fundamental and applied contexts. This review takes a tutorial approach to illustrate how 20 years of source development and technology has facilitated the journey of optical frequency combs from the lab into the field. Optical frequency combs were realized nearly two decades ago to support the development of the world’s most precise atomic clocks, but their versatility has since made them useful instruments well beyond their original goal, and spans across a wide variety of fundamental and applied physics in a wide range of wavelengths. Fortier and Baumann present a comprehensive review of developments in optical frequency comb technology and a view to the future with these technologies.

311 citations

Journal ArticleDOI
TL;DR: In this article, the authors overview the field of the dispersion managed solitons starting from mathematical theories of Hamiltonian and dissipative systems and then discuss recent advances in practical implementation of this concept in fibre-optics and lasers.

262 citations

Journal ArticleDOI
31 May 2012-Nature
TL;DR: The calibration of an astronomical spectrograph with a short-term Doppler shift repeatability of 2.5 cm s−1 is reported, which should make it possible to detect Earth-like planets in the habitable zone of star or even to measure the cosmic acceleration directly.
Abstract: The best spectrographs are limited in stability by their calibration light source. Laser frequency combs are the ideal calibrators for astronomical spectrographs. They emit a spectrum of lines that are equally spaced in frequency and that are as accurate and stable as the atomic clock relative to which the comb is stabilized. Absolute calibration provides the radial velocity of an astronomical object relative to the observer (on Earth). For the detection of Earth-mass exoplanets in Earth-like orbits around solar-type stars, or of cosmic acceleration, the observable is a tiny velocity change of less than 10 cm s(-1), where the repeatability of the calibration--the variation in stability across observations--is important. Hitherto, only laboratory systems or spectrograph calibrations of limited performance have been demonstrated. Here we report the calibration of an astronomical spectrograph with a short-term Doppler shift repeatability of 2.5 cm s(-1), and use it to monitor the star HD 75289 and recompute the orbit of its planet. This repeatability should make it possible to detect Earth-like planets in the habitable zone of star or even to measure the cosmic acceleration directly.

245 citations

Journal ArticleDOI
TL;DR: In this paper, a stack-and-draw technique was used to construct a ZBLAN photonic crystal fiber with a high air-filling fraction, a small solid core, nanoscale features and near-perfect structure.
Abstract: Silica-based photonic crystal fibre has proven highly successful for supercontinuum generation, with smooth and flat spectral power densities. However, fused silica glass suffers from strong material absorption in the mid-infrared (>2,500 nm), as well as ultraviolet-related optical damage (solarization), which limits performance and lifetime in the ultraviolet (<380 nm). Supercontinuum generation in silica photonic crystal fibre is therefore only possible between these limits. A number of alternative glasses have been used to extend the mid-infrared performance, including chalcogenides, fluorides and heavy-metal oxides, but none has extended the ultraviolet performance. Here, we describe the successful fabrication (using the stack-and-draw technique) of a ZBLAN photonic crystal fibre with a high air-filling fraction, a small solid core, nanoscale features and near-perfect structure. We also report its use in the generation of ultrabroadband, long-term stable, supercontinua spanning more than three octaves in the spectral range 200–2,500 nm. A low-loss ZBLAN micro-structured fibre is used to generate a supercontinuum spanning from the UV to the mid-IR (200 nm–2,500 nm). The material has high resistance even after extended operation and can withstand large spectral power densities.

230 citations