S. Sivananthan

Bio: S. Sivananthan is an academic researcher from University of Illinois at Chicago. The author has contributed to research in topics: Molecular beam epitaxy & Epitaxy. The author has an hindex of 29, co-authored 161 publications receiving 2973 citations.

Direct observation of the core structures of threading dislocations in GaN

Abstract: Here we present the first direct observation of the atomic structure of threading dislocation cores in hexagonal GaN. Using atomic-resolution Z-contrast imaging, dislocations with edge character are found to exhibit an eight-fold ring core. The central column in the core of a pure edge dislocation has the same configuration as one row of dimers on the {10-10} surface. Following recent theoretical work, it is proposed that edge dislocations do not have deep defect states in the band gap, and do not contribute to cathodoluminescence dislocation contrast. On the other hand, both mixed and pure screw dislocations are found to have a full core, and full screw dislocation cores were calculated to have states in the gap.

Molecular beam epitaxial growth of CdTe and HgCdTe on Si (100)

Abstract: CdTe has been grown on Si(100) by molecular beam epitaxy. Two orientations can be obtained: (111)B CdTe when the CdTe is deposited directly on the Si(100) substrates, and (100)CdTe when an intermediate layer of ZnTe is grown first. The (111)B oriented layers are made of two domains which are rotated by 90°. A layer with only one domain can be grown on Si(100) misoriented by 8°, but the best misorientation for this purpose still needs to be found. These layers were characterized by reflection high‐energy electron diffraction, photoluminescence spectroscopy, scanning electron microscopy, and x‐ray diffraction. Hg1−xCdxTe has also been grown by molecular beam epitaxy on (111)B CdTe on Si(100).

Single-crystal II-VI on Si single-junction and tandem solar cells

Abstract: CdTe is one of the leading materials used in solar photovoltaics. However, the maximum reported CdTe cell efficiencies are considerably lower than the theoretically expected efficiencies for the ∼1.48 eV CdTe band gap. We report a class of single crystal CdTe-based solar cells grown epitaxially on crystalline Si that show promise for enhancing the efficiency and greatly lowering the cost per watt of single-junction and multijunction solar cells. The current-voltage results for our CdZnTe on Si solar cells show open-circuit voltages significantly higher than previously reported for any II-VI cells and as close to the thermodynamic limit as the best III-V-based cells.

Relation between crystallographic orientation and the condensation coefficients of Hg, Cd, and Te during molecular-beam-epitaxial growth of Hg1−xCdxTe and CdTe

Abstract: We investigate here the influence of the crystallographic orientation of the CdTe substrate on the condensation coefficients of Hg, Cd, and Te during the growth of Hg1−xCdxTe and CdTe by molecular‐beam epitaxy. We show that the Hg condensation coefficient is strongly influenced by the orientation. A CdTe (111)B face requires about one order of magnitude less mercury than a (111)A face when growth occurs at 185 °C. Whereas for a CdTe(100) face, the Hg condensation coefficient falls in between. Even though the effect is less dramatic for the condensation coefficient of cadmium, a similar tendency is observed. These results can be explained in terms of the bonding of the surface atoms and confirm once again that the surface plays an important role in the molecular‐beam‐epitaxial growth process.

Direct experimental observation of the local electronic structure at threading dislocations in metalorganic vapor phase epitaxy grown wurtzite GaN thin films

Abstract: The electronic structure of pure edge threading dislocations in metalorganic vapor phase epitaxy grown wurtzite GaN thin films has been studied directly by atomic resolution Z-contrast imaging and electron energy loss spectroscopy in a scanning transmission electron microscope Dislocation cores in n-type samples grown in N-rich conditions show no evidence for the high concentration of Ga vacancies predicted by previous theoretical calculations Nitrogen K-edge spectra collected from edge dislocation cores show a sudden and significant increase in the intensity of the first fine-structure peak immediately above the edge onset compared to the bulk spectra The origin of this increase is discussed

Opportunities and challenges for a sustainable energy future

Abstract: Access to clean, affordable and reliable energy has been a cornerstone of the world's increasing prosperity and economic growth since the beginning of the industrial revolution. Our use of energy in the twenty–first century must also be sustainable. Solar and water–based energy generation, and engineering of microbes to produce biofuels are a few examples of the alternatives. This Perspective puts these opportunities into a larger context by relating them to a number of aspects in the transportation and electricity generation sectors. It also provides a snapshot of the current energy landscape and discusses several research and development opportunities and pathways that could lead to a prosperous, sustainable and secure energy future for the world.

Ion and electron irradiation-induced effects in nanostructured materials

Abstract: A common misconception is that the irradiation of solids with energetic electrons and ions has exclusively detrimental effects on the properties of target materials. In addition to the well-known cases of doping of bulk semiconductors and ion beam nitriding of steels, recent experiments show that irradiation can also have beneficial effects on nanostructured systems. Electron or ion beams may serve as tools to synthesize nanoclusters and nanowires, change their morphology in a controllable manner, and tailor their mechanical, electronic, and even magnetic properties. Harnessing irradiation as a tool for modifying material properties at the nanoscale requires having the full microscopic picture of defect production and annealing in nanotargets. In this article, we review recent progress in the understanding of effects of irradiation on various zero-dimensional and one-dimensional nanoscale systems, such as semiconductor and metal nanoclusters and nanowires, nanotubes, and fullerenes. We also consider the t...

Nanostructured metal sulfides for energy storage

Abstract: Advanced electrodes with a high energy density at high power are urgently needed for high-performance energy storage devices, including lithium-ion batteries (LIBs) and supercapacitors (SCs), to fulfil the requirements of future electrochemical power sources for applications such as in hybrid electric/plug-in-hybrid (HEV/PHEV) vehicles. Metal sulfides with unique physical and chemical properties, as well as high specific capacity/capacitance, which are typically multiple times higher than that of the carbon/graphite-based materials, are currently studied as promising electrode materials. However, the implementation of these sulfide electrodes in practical applications is hindered by their inferior rate performance and cycling stability. Nanostructures offering the advantages of high surface-to-volume ratios, favourable transport properties, and high freedom for the volume change upon ion insertion/extraction and other reactions, present an opportunity to build next-generation LIBs and SCs. Thus, the development of novel concepts in material research to achieve new nanostructures paves the way for improved electrochemical performance. Herein, we summarize recent advances in nanostructured metal sulfides, such as iron sulfides, copper sulfides, cobalt sulfides, nickel sulfides, manganese sulfides, molybdenum sulfides, tin sulfides, with zero-, one-, two-, and three-dimensional morphologies for LIB and SC applications. In addition, the recently emerged concept of incorporating conductive matrices, especially graphene, with metal sulfide nanomaterials will also be highlighted. Finally, some remarks are made on the challenges and perspectives for the future development of metal sulfide-based LIB and SC devices.

HgCdTe infrared detector material: history, status and outlook

Abstract: This article reviews the history, the present status and possible future developments of HgCdTe ternary alloy for infrared (IR) detector applications. HgCdTe IR detectors have been intensively developed since the first synthesis of this material in 1958. This article summarizes the fundamental properties of this versatile narrow gap semiconductor, and relates the material properties to its successful applications as an IR photoconductive and photovoltaic detector material. An emphasis is put on key developments in the crystal growth and their influence on device evolution. Competitive technologies to HgCdTe ternary alloy are also presented. Recent advances of backside illuminated HgCdTe heterojunction photodiodes have enabled a third generation of multispectral instruments for remote sensing applications and have led to the practicality of multiband IR focal plane array technology. Finally, evaluation of HgCdTe for room temperature long wavelength IR applications is presented. (Some figures in this article are in colour only in the electronic version)