S. Srinivas

Bio: S. Srinivas is an academic researcher from Indian Institute of Science. The author has contributed to research in topics: Elasticity (physics) & Transcendental equation. The author has an hindex of 3, co-authored 3 publications receiving 781 citations.

Historical review of Zig-Zag theories for multilayered plates and shells

Abstract: This paper gives a historical review of the theories that have been developed for the analysis of multilayered structures. Attention has been restricted to the so-called Zig-Zag theories, which describe a piecewise continuous displacement field in the plate thickness direction and fulfill interlaminar continuity of transverse stresses at each layer interface. Basically, plate and shell geometries are addressed, even though beams are also considered in some cases. Models in which the number of displacement variables is kept independent of the number of constitutive layers are discussed to the greatest extent. Attention has been restricted to those plate and shell theories which are based on the so-called method of hypotheses or axiomatic approach in which assumptions are introduced for displacements and/or transverse stresses. Mostly, the work published in the English language is reviewed. However, an account of a few articles originally written in Russian is also given. The historical review conducted has led to the following main conclusions. 1! Lekhnitskii ~1935! was the first to propose a Zig-Zag theory, which was obtained by solving an elasticity problem involving a layered beam. 2! Two other different and independent Zig-Zag theories have been singled out. One was developed by Ambartsumian ~1958!, who extended the well-known Reissner-Mindlin theory to layered, anisotropic plates and shells; the other approach was introduced by Reissner ~1984!, who proposed a variational theorem that permits both displacements and transverse stress assumptions. 3 ! On the basis of historical considerations, which are detailed in the paper, it is proposed to refer to these three theories by using the following three names: Lekhnitskii Multilayered Theory, ~LMT!, Ambartsumian Multilayered Theory ~AMT!, and Reissner Multilayered Theory ~RMT!. As far as subsequent contributions to these three theories are concerned, it can be remarked that: 4! LMT although very promising, has almost been ignored in the open literature. 5! Dozens of papers have instead been presented which consist of direct applications or particular cases of the original AMT. The contents of the original works have very often been ignored, not recognized, or not mentioned in the large number of articles that were published in journals written in the English language. Such historical unfairness is detailed in Section 3.2. 6! RMT seems to be the most natural and powerful method to analyze multilayered structures. Compared to other theories, the RMT approach has allowed from the beginning development of models which retain the fundamental effect related to transverse normal stresses and strains. This review article cites 138 references. @DOI: 10.1115/1.1557614#

Theories and Finite Elements for Multilayered, Anisotropic, Composite Plates and Shells

Abstract: This work is an overview of available theories and finite elements that have been developed for multilayered, anisotropic, composite plate and shell structures. Although a comprehensive description of several techniques and approaches is given, most of this paper has been devoted to the so called axiomatic theories and related finite element implementations. Most of the theories and finite elements that have been proposed over the last thirty years are in fact based on these types of approaches. The paper has been divided into three parts. Part I, has been devoted to the description of possible approaches to plate and shell structures: 3D approaches, continuum based methods, axiomatic and asymptotic two-dimensional theories, classical and mixed formulations, equivalent single layer and layer wise variable descriptions are considered (the number of the unknown variables is considered to be independent of the number of the constitutive layers in the equivalent single layer case). Complicating effects that have been introduced by anisotropic behavior and layered constructions, such as high transverse deformability, zig-zag effects and interlaminar continuity, have been discussed and summarized by the acronimC -Requirements. Two-dimensional theories have been dealt with in Part II. Contributions based on axiomatic, asymtotic and continuum based approaches have been overviewed. Classical theories and their refinements are first considered. Both case of equivalent single-layer and layer-wise variables descriptions are discussed. The so-called zig-zag theories are then discussed. A complete and detailed overview has been conducted for this type of theory which relies on an approach that is entirely originated and devoted to layered constructions. Formulas and contributions related to the three possible zig-zag approaches, i.e. Lekhnitskii-Ren, Ambartsumian-Whitney-Rath-Das, Reissner-Murakami-Carrera ones have been presented and overviewed, taking into account the findings of a recent historical note provided by the author. Finite Element FE implementations are examined in Part III. The possible developments of finite elements for layered plates and shells are first outlined. FEs based on the theories considered in Part II are discussed along with those approaches which consist of a specific application of finite element techniques, such as hybrid methods and so-called global/local techniques. The extension of finite elements that were originally developed for isotropic one layered structures to multilayerd plates and shells are first discussed. Works based on classical and refined theories as well as on equivalent single layer and layer-wise descriptions have been overviewed. Development of available zig-zag finite elements has been considered for the three cases of zig-zag theories. Finite elements based on other approches are also discussed. Among these, FEs based on asymtotic theories, degenerate continuum approaches, stress resultant methods, asymtotic methods, hierarchy-p,_-s global/local techniques as well as mixed and hybrid formulations have been overviewed.

Ultrasonic Guided Waves in Solid Media

Abstract: Preface Acknowledgments 1. Introduction 2. Dispersion principles 3. Unbounded isotropic and anisotropic media 4. Reflection and refraction 5. Oblique incidence 6. Waves in plates 7. Surface and subsurface waves 8. Finite element method for guided wave mechanics 9. The semi-analytical finite element method (SAFE) 10. Guided waves in hollow cylinders 11. Circumferential guided waves 12. Guided waves in layered structures 13. Source influence on guided wave excitation 14. Horizontal shear 15. Guided waves in anisotropic media 16. Guided wave phased arrays in piping 17. Guided waves in viscoelastic media 18. Ultrasonic vibrations 19. Guided wave array transducers 20. Introduction to guided wave nonlinear methods 21. Guided wave imaging methods Appendix A: ultrasonic nondestructive testing principles, analysis and display technology Appendix B: basic formulas and concepts in the theory of elasticity Appendix C: physically based signal processing concepts for guided waves Appendix D: guided wave mode and frequency selection tips.