S. Tiedke

Bio: S. Tiedke is an academic researcher from RWTH Aachen University. The author has contributed to research in topics: Ferroelectricity & Piezoelectricity. The author has an hindex of 15, co-authored 34 publications receiving 2113 citations.

Resistive switching mechanism of TiO2 thin films grown by atomic-layer deposition

Abstract: The resistive switching mechanism of 20- to 57-nm-thick TiO2 thin films grown by atomic-layer deposition was studied by current-voltage measurements and conductive atomic force microscopy. Electric pulse-induced resistance switching was repetitively (> a few hundred times) observed with a resistance ratio ⪢102. Both the low- and high-resistance states showed linear log current versus log voltage graphs with a slope of 1 in the low-voltage region where switching did not occur. The thermal stability of both conduction states was also studied. Atomic force microscopy studies under atmosphere and high-vacuum conditions showed that resistance switching is closely related to the formation and elimination of conducting spots. The conducting spots of the low-resistance state have a few tens times higher conductivity than those of the high-resistance state and their density is also a few tens times higher which results in a ∼103 times larger overall conductivity. An interesting finding was that the area where the ...

Dynamic leakage current compensation in ferroelectric thin-film capacitor structures

Abstract: We report on a measurement procedure to separate ferroelectric switching current and dielectric displacement current from the leakage current in leaky ferroelectric thin-film capacitor structures. The ac current response is determined for two adjacent frequencies. Taking advantage of the different frequency dependencies of the ferroelectric switching current, dielectric displacement current and ohmic current, the hysteresis loop is calculated without performing a static leakage current measurement, which causes a high dc field stress to the sample. The applicability of the proposed measurement procedure is demonstrated on a Pt∕Pb(Zr,Ti)O3∕IrO2 ferroelectric capacitor revealing a high leakage current.

Nanosize ferroelectric oxides – tracking down the superparaelectric limit

Abstract: Free ferroelectric nanoparticles in the order of 10 nm undergo a size driven phase transition into a paraelectric phase. However, in all applications, especially in ferroelectric random access memories, ferroelectric nanograins are integrated into a circuit. They are therefore exposed to new electromechanical boundary conditions e.g. substrate strain and screening of the depolarization field in the electrodes. Carefully adapted to the respective material, some of the extrinsic effects can be used to stabilize ferroelectricity and to shrink the ultimate size. The system performance is very sensitive to the fabrication and processing procedures.

Piezoelectric thin films: evaluation of electrical and electromechanical characteristics for MEMS devices

Abstract: We present a new measurement method to characterize piezoelectric thin films utilizing a four-point bending setup. In combination with a single- or a double-beam laser interferometer, this setup allows the determination of the effective transverse and longitudinal piezoelectric coefficients e31,f and d33,f respectively. Additionally, the dielectric coefficient and the large signal electrical polarization are measured to add further important characteristics of the film. These data are essential for piezoelectric thin film process specification and the design and qualification of microelectromechanical systems devices.

Nanoionics-based resistive switching memories

Abstract: Many metal–insulator–metal systems show electrically induced resistive switching effects and have therefore been proposed as the basis for future non-volatile memories. They combine the advantages of Flash and DRAM (dynamic random access memories) while avoiding their drawbacks, and they might be highly scalable. Here we propose a coarse-grained classification into primarily thermal, electrical or ion-migration-induced switching mechanisms. The ion-migration effects are coupled to redox processes which cause the change in resistance. They are subdivided into cation-migration cells, based on the electrochemical growth and dissolution of metallic filaments, and anion-migration cells, typically realized with transition metal oxides as the insulator, in which electronically conducting paths of sub-oxides are formed and removed by local redox processes. From this insight, we take a brief look into molecular switching systems. Finally, we discuss chip architecture and scaling issues.

Memristive devices for computing

Abstract: Memristive devices are electrical resistance switches that can retain a state of internal resistance based on the history of applied voltage and current. These devices can store and process information, and offer several key performance characteristics that exceed conventional integrated circuit technology. An important class of memristive devices are two-terminal resistance switches based on ionic motion, which are built from a simple conductor/insulator/conductor thin-film stack. These devices were originally conceived in the late 1960s and recent progress has led to fast, low-energy, high-endurance devices that can be scaled down to less than 10 nm and stacked in three dimensions. However, the underlying device mechanisms remain unclear, which is a significant barrier to their widespread application. Here, we review recent progress in the development and understanding of memristive devices. We also examine the performance requirements for computing with memristive devices and detail how the outstanding challenges could be met.

Memristive switching mechanism for metal/oxide/metal nanodevices.

Abstract: Nanoscale metal/oxide/metal switches have the potential to transform the market for nonvolatile memory and could lead to novel forms of computing. However, progress has been delayed by difficulties in understanding and controlling the coupled electronic and ionic phenomena that dominate the behaviour of nanoscale oxide devices. An analytic theory of the ‘memristor’ (memory-resistor) was first developed from fundamental symmetry arguments in 1971, and we recently showed that memristor behaviour can naturally explain such coupled electron–ion dynamics. Here we provide experimental evidence to support this general model of memristive electrical switching in oxide systems. We have built micro- and nanoscale TiO2 junction devices with platinum electrodes that exhibit fast bipolar nonvolatile switching. We demonstrate that switching involves changes to the electronic barrier at the Pt/TiO2 interface due to the drift of positively charged oxygen vacancies under an applied electric field. Vacancy drift towards the interface creates conducting channels that shunt, or short-circuit, the electronic barrier to switch ON. The drift of vacancies away from the interface annilihilates such channels, recovering the electronic barrier to switch OFF. Using this model we have built TiO2 crosspoints with engineered oxygen vacancy profiles that predictively control the switching polarity and conductance. Nanoscale metal/oxide/metal devices that are capable of fast non-volatile switching have been built from platinum and titanium dioxide. The devices could have applications in ultrahigh density memory cells and novel forms of computing.