S. Tyagi

Bio: S. Tyagi is an academic researcher from Intel. The author has contributed to research in topics: Transistor & MOSFET. The author has an hindex of 18, co-authored 24 publications receiving 2480 citations.

A 90-nm logic technology featuring strained-silicon

Abstract: A leading-edge 90-nm technology with 1.2-nm physical gate oxide, 45-nm gate length, strained silicon, NiSi, seven layers of Cu interconnects, and low-/spl kappa/ CDO for high-performance dense logic is presented. Strained silicon is used to increase saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10% and 25%, respectively. Using selective epitaxial Si/sub 1-x/Ge/sub x/ in the source and drain regions, longitudinal uniaxial compressive stress is introduced into the p-type MOSEFT to increase hole mobility by >50%. A tensile silicon nitride-capping layer is used to introduce tensile strain into the n-type MOSFET and enhance electron mobility by 20%. Unlike all past strained-Si work, the hole mobility enhancement in this paper is present at large vertical electric fields in nanoscale transistors making this strain technique useful for advanced logic technologies. Furthermore, using piezoresistance coefficients it is shown that significantly less strain (/spl sim/5 /spl times/) is needed for a given PMOS mobility enhancement when applied via longitudinal uniaxial compression versus in-plane biaxial tension using the conventional Si/sub 1-x/Ge/sub x/ substrate approach.

A logic nanotechnology featuring strained-silicon

Abstract: Strained-silicon (Si) is incorporated into a leading edge 90-nm logic technology . Strained-Si increases saturated n-type and p-type metal-oxide-semiconductor field-effect transistors (MOSFETs) drive currents by 10 and 25%, respectively. The process flow consists of selective epitaxial Si/sub 1-x/Ge/sub x/ in the source/drain regions to create longitudinal uniaxial compressive strain in the p-type MOSFET. A tensile Si nitride-capping layer is used to introduce tensile uniaxial strain into the n-type MOSFET and enhance electron mobility. Unlike past strained-Si work: 1) the amount of strain for the n-type and p-type MOSFET can be controlled independently on the same wafer and 2) the hole mobility enhancement in this letter is present at large vertical electric fields, thus, making this flow useful for nanoscale transistors in advanced logic technologies.

A 65nm logic technology featuring 35nm gate lengths, enhanced channel strain, 8 Cu interconnect layers, low-k ILD and 0.57 /spl mu/m/sup 2/ SRAM cell

Abstract: A 65nm generation logic technology with 1.2nm physical gate oxide, 35nm gate length, enhanced channel strain, NiSi, 8 layers of Cu interconnect, and low-k ILD for dense high performance logic is presented. Transistor gate length is scaled down to 35nm while not scaling the gate oxide as a means to improve performance and reduce power. Increased NMOS and PMOS drive currents are achieved by enhanced channel strain and junction engineering. 193nm lithography along with APSM mask technology is used on critical layers to provide aggressive design rules and a 6-T SRAM cell size of 0.57/spl mu/m/sup 2/. Process yield, performance and reliability are demonstrated on a 70 Mbit SRAM test vehicle with >0.5 billion transistors.

In search of "Forever," continued transistor scaling one new material at a time

Abstract: This work looks at past, present, and future material changes for the metal-oxide-semiconductor field-effect transistor (MOSFET). It is shown that conventional planar bulk MOSFET channel length scaling, which has driven the industry for the last 40 years, is slowing. To continue Moore's law, new materials and structures are required. The first major material change to extend Moore's law is the use of SiGe at the 90-nm technology generation to incorporate significant levels of strain into the Si channel for 20%-50% mobility enhancement. For the next several logic technologies, MOSFETs will improve though higher levels of uniaxial process stress. After that, new materials that address MOSFET poly-Si gate depletion, gate thickness scaling, and alternate device structures (FinFET, tri-gate, or carbon nanotube) are possible technology directions. Which of these options are implemented depends on the magnitude of the performance benefit versus manufacturing complexity and cost. Finally, for future material changes targeted toward enhanced transistor performance, there are three key points: 1) performance enhancement options need to be scalable to future technology nodes; 2) new transistor features or structures that are not additive with current enhancement concepts may not be viable; and 3) improving external resistance appears more important than new channel materials (like carbon nanotubes) since the ratio of external to channel resistance is approaching /spl sim/1 in nanoscale planar MOSFETs.

Scaling challenges and device design requirements for high performance sub-50 nm gate length planar CMOS transistors

Abstract: Summary form only given. We investigate scaling challenges and outline device design requirements needed to support high performance-low power planar CMOS transistor structures with physical gate lengths (L/sub GATE/) below 50 nm. This work uses a combination of simulation results, experimental data and critical analysis of published data. A realistic assessment of gate oxide thickness scaling and maximum tolerable oxide leakage is provided. We conclude that the commonly accepted upper limit of 1 A/cm/sup 2/ for gate leakage is overly pessimistic and that leakage values of up to 100 A/cm/sup 2/ are deemed acceptable for future logic technology generations. Unique channel mobility and junction edge leakage degradation mechanisms, which become prominent at 50 nm L/sub GATE/ dimensions, are highlighted using quantitative analysis. Source-drain extension (SDE) profile design requirements to simultaneously minimize short channel effects (SCE) and achieve low parasitic resistance for sub-50 nm L/sub GATE/ transistors are described for the first time.

Fundamentals of Modern VLSI Devices

Abstract: Learn the basic properties and designs of modern VLSI devices, as well as the factors affecting performance, with this thoroughly updated second edition. The first edition has been widely adopted as a standard textbook in microelectronics in many major US universities and worldwide. The internationally-renowned authors highlight the intricate interdependencies and subtle tradeoffs between various practically important device parameters, and also provide an in-depth discussion of device scaling and scaling limits of CMOS and bipolar devices. Equations and parameters provided are checked continuously against the reality of silicon data, making the book equally useful in practical transistor design and in the classroom. Every chapter has been updated to include the latest developments, such as MOSFET scale length theory, high-field transport model, and SiGe-base bipolar devices.

Nanowire transistors without junctions

Abstract: All existing transistors are based on the use of semiconductor junctions formed by introducing dopant atoms into the semiconductor material. As the distance between junctions in modern devices drops below 10 nm, extraordinarily high doping concentration gradients become necessary. Because of the laws of diffusion and the statistical nature of the distribution of the doping atoms, such junctions represent an increasingly difficult challenge for the semiconductor industry. Here, we propose and demonstrate a new type of transistor in which there are no junctions and no doping concentration gradients. These devices have full CMOS functionality and are made using silicon nanowires. They have near-ideal subthreshold slope, extremely low leakage currents, and less degradation of mobility with gate voltage and temperature than classical transistors.

Valleytronics in 2D materials

Abstract: Semiconductor technology is currently based on the manipulation of electronic charge; however, electrons have additional degrees of freedom, such as spin and valley, that can be used to encode and process information. Over the past several decades, there has been significant progress in manipulating electron spin for semiconductor spintronic devices, motivated by potential spin-based information processing and storage applications. However, experimental progress towards manipulating the valley degree of freedom for potential valleytronic devices has been limited until very recently. We review the latest advances in valleytronics, which have largely been enabled by the isolation of 2D materials (such as graphene and semiconducting transition metal dichalcogenides) that host an easily accessible electronic valley degree of freedom, allowing for dynamic control. The energy extrema of an electronic band are referred to as valleys. In 2D materials, two distinguishable valleys can be used to encode information and explore other valleytronic applications.

Stretchable and foldable silicon integrated circuits.

Abstract: We have developed a simple approach to high-performance, stretchable, and foldable integrated circuits. The systems integrate inorganic electronic materials, including aligned arrays of nanoribbons of single crystalline silicon, with ultrathin plastic and elastomeric substrates. The designs combine multilayer neutral mechanical plane layouts and "wavy" structural configurations in silicon complementary logic gates, ring oscillators, and differential amplifiers. We performed three-dimensional analytical and computational modeling of the mechanics and the electronic behaviors of these integrated circuits. Collectively, the results represent routes to devices, such as personal health monitors and other biomedical devices, that require extreme mechanical deformations during installation/use and electronic properties approaching those of conventional systems built on brittle semiconductor wafers.

The future of wires

Abstract: Concern about the performance of wires wires in scaled technologies has led to research exploring other communication methods. This paper examines wire and gate delays as technologies migrate from 0.18-/spl mu/m to 0.035-/spl mu/m feature sizes to better understand the magnitude of the the wiring problem. Wires that shorten in length as technologies scale have delays that either track gate delays or grow slowly relative to gate delays. This result is good news since these "local" wires dominate chip wiring. Despite this scaling of local wire performance, computer-aided design (CAD) tools must still become move sophisticated in dealing with these wires. Under scaling, the total number of wires grows exponentially, so CAD tools will need to handle an ever-growing percentage of all the wires in order to keep designer workloads constant. Global wires present a more serious problem to designers. These are wires that do not scale in length since they communicate signals across the chip. The delay of these wives will remain constant if repeaters are used meaning that relative to gate delays, their delays scale upwards. These increased delays for global communication will drive architectures toward modular designs with explicit global latency mechanisms.