scispace - formally typeset
Search or ask a question
Author

Sam Zhang

Bio: Sam Zhang is an academic researcher from Southwest University. The author has contributed to research in topics: Thin film & Sputter deposition. The author has an hindex of 59, co-authored 394 publications receiving 12468 citations. Previous affiliations of Sam Zhang include University of Illinois at Urbana–Champaign & Harbin Institute of Technology.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, some critical issues and problems in the development of TiNi thin films are discussed, including preparation and characterization considerations, residual stress and adhesion, frequency improvement, fatigue and stability, modeling of behavior as well as functionally graded or composite thin films.
Abstract: TiNi thin films have attracted much attention in recent years as intelligent and functional materials because of their unique properties. TiNi thin film based micro-actuators will become the actuator of choice in many aspects in the rapidly growing field of micro-electro-mechanical systems (MEMSs). In this review paper, some critical issues and problems in the development of TiNi thin films are discussed, including preparation and characterization considerations, residual stress and adhesion, frequency improvement, fatigue and stability, modeling of behavior as well as functionally graded or composite thin films. Comparison is made of TiNi SMA micro-actuation with other micro-actuation methods. Different types of TiNi thin film based microdevices, such as microgrippers, microswitches, microvalves and pumps, microsensors, etc. are also described and discussed.

743 citations

Reference BookDOI
Sam Zhang1
05 Oct 2020

464 citations

Journal ArticleDOI
TL;DR: A review of the present status of the research and technological development in the field of superhard nanocomposite coatings is attempted in this article, where a number of deposition techniques have been used to prepare Nanocomposites. Among them, reactive magnetron sputtering is most commonly used.
Abstract: In this paper, a review of the present status of the research and technological development in the field of superhard nanocomposite coatings is attempted. Various deposition techniques have been used to prepare nanocomposite coatings. Among them, reactive magnetron sputtering is most commonly used. Nanocomposite coating design methodology and synthesis are described with emphasis on the magnetron sputtering deposition technique. Also discussed are the hardness and fracture toughness measurements of the coatings and the size effect. Superhard nanocomposite thin films are obtainable through optimal design of microstructure. So far, much attention is paid to increasing hardness, but not enough to toughness. The development of next generation superhard coatings should base on appropriate material design to achieve high hardness and at the same time high toughness.

425 citations

Journal ArticleDOI
TL;DR: In this article, four kinds of hard coatings, TiN, CrN, TiAlN and CrAlN (with Al/Ti or Al/Cr atomic ratio around 1:1), were deposited on stainless steel substrates by a lateral rotating cathode arc technique.

342 citations

Journal ArticleDOI
TL;DR: In this article, the authors give a critical review of stress-based and energy-based methods for assessing the toughness of thin films and conclude that, for thin films, the energybased approach, especially the one independent of substrate, is more advantageous.
Abstract: At present, there is neither standard test procedure nor standard methodology for assessment of toughness of thin films. However, researchers have long been trying to make such measurements, thus a spectrum of test methods have been developed, mostly each in its own way. As qualitative or semiquantitative assessment, a simple plasticity measurement or scratch adhesion test can mostly suffice. For quantitative description, however, a choice of bending, buckling, indentation, scratching, or tensile test has to be made. These testing methods are either stress-based or energy-based. This paper gives a critical review on these methods and concludes that, for thin films, the energy-based approach, especially the one independent of substrate, is more advantageous.

333 citations


Cited by
More filters
01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

Book
28 Sep 2004
TL;DR: Mechanical Alloying (MA) is a solid-state powder processng technique involving repeated welding, fracturing, and rewelding of powder particles in a high-energy ball mill as mentioned in this paper.
Abstract: Mechanical alloying (MA) is a solid-state powder processng technique involving repeated welding, fracturing, and rewelding of powder particles in a high-energy ball mill. Originally developed to produce oxide-dispersion strengthened (ODS) nickel- and iron-base superalloys for applications in the aerospace industry, MA has now been shown to be capable of synthesizing a variety of equilibrium and non-equilibrium alloy phases starting from blended elemental or prealloyed powders. The non-equilibrium phases synthesized include supersaturated solid solutions, metastable crystalline and quasicrystalline phases, nanostructures, and amorphous alloys. Recent advances in these areas and also on disordering of ordered intermetallics and mechanochemical synthesis of materials have been critically reviewed after discussing the process and process variables involved in MA. The often vexing problem of powder contamination has been analyzed and methods have been suggested to avoid/minimize it. The present understanding of the modeling of the MA process has also been discussed. The present and potential applications of MA are described. Wherever possible, comparisons have been made on the product phases obtained by MA with those of rapid solidification processing, another non-equilibrium processing technique.

3,773 citations

Journal ArticleDOI
TL;DR: Shape memory alloys (SMAs) are a class of shape memory materials (SMMs) which have the ability to "memorise" or retain their previous form when subjected to certain stimulus such as thermomechanical or magnetic variations.

2,818 citations

Journal ArticleDOI
TL;DR: Characterization and Properties 3928 8.2.1.
Abstract: 5. In Situ Polymerization 3907 5.1. General Polymerization 3907 5.2. Photopolymerization 3910 5.3. Surface-Initiated Polymerization 3912 5.4. Other Methods 3913 6. Colloidal Nanocomposites 3913 6.1. Sol-Gel Process 3914 6.2. In Situ Polymerization 3916 6.2.1. Emulsion Polymerization 3917 6.2.2. Emulsifier-Free Emulsion Polymerization 3919 6.2.3. Miniemulsion Polymerization 3920 6.2.4. Dispersion Polymerization 3921 6.2.5. Other Polymerization Methods 3923 6.2.6. Conducting Nanocomposites 3924 6.3. Self Assembly 3926 7. Other Preparative Methods 3926 8. Characterization and Properties 3928 8.1. Chemical Structure 3928 8.2. Microstructure and Morphology 3929 8.3. Mechanical Properties 3933 8.3.1. Tensile, Impact, and Flexural Properties 3933 8.3.2. Hardness 3936 8.3.3. Fracture Toughness 3937 8.3.4. Friction and Wear Properties 3937 8.4. Thermal Properties 3938 8.5. Flame-Retardant Properties 3941 8.6. Optical Properties 3942 8.7. Gas Transport Properties 3943 8.8. Rheological Properties 3945 8.9. Electrical Properties 3945 8.10. Other Characterization Techniques 3946 9. Applications 3947 9.1. Coatings 3947 9.2. Proton Exchange Membranes 3948 9.3. Pervaporation Membranes 3948 9.4. Encapsulation of Organic Light-Emitting Devices 3948

1,915 citations

Journal ArticleDOI
TL;DR: The fundamentals, recent research progress, present status, and views on future prospects of perovskite-based photovoltaics, with discussions focused on strategies to improve both intrinsic and extrinsic (environmental) stabilities of high-efficiency devices are described.
Abstract: The photovoltaics of organic–inorganic lead halide perovskite materials have shown rapid improvements in solar cell performance, surpassing the top efficiency of semiconductor compounds such as CdTe and CIGS (copper indium gallium selenide) used in solar cells in just about a decade. Perovskite preparation via simple and inexpensive solution processes demonstrates the immense potential of this thin-film solar cell technology to become a low-cost alternative to the presently commercially available photovoltaic technologies. Significant developments in almost all aspects of perovskite solar cells and discoveries of some fascinating properties of such hybrid perovskites have been made recently. This Review describes the fundamentals, recent research progress, present status, and our views on future prospects of perovskite-based photovoltaics, with discussions focused on strategies to improve both intrinsic and extrinsic (environmental) stabilities of high-efficiency devices. Strategies and challenges regardi...

1,720 citations