scispace - formally typeset
Search or ask a question
Author

Samir Ghalmi

Bio: Samir Ghalmi is an academic researcher. The author has contributed to research in topics: Optical fiber & Photonic-crystal fiber. The author has an hindex of 18, co-authored 53 publications receiving 1690 citations.

Papers published on a yearly basis

Papers
More filters
Journal ArticleDOI
TL;DR: A new measurement technique, capable of quantifying the number and type of modes propagating in large-mode-area fibers is both proposed and demonstrated, based on both spatially and spectrally resolving the image of the output of the fiber under test.
Abstract: A new measurement technique, capable of quantifying the number and type of modes propagating in large-mode-area fibers is both proposed and demonstrated. The measurement is based on both spatially and spectrally resolving the image of the output of the fiber under test. The measurement provides high quality images of the modes that can be used to identify the mode order, while at the same time returning the power levels of the higher-order modes relative to the fundamental mode. Alternatively the data can be used to provide statistics on the level of beam pointing instability and mode shape changes due to random uncontrolled fluctuations of the phases between the coherent modes propagating in the fiber. An added advantage of the measurement is that is requires no prior detailed knowledge of the fiber properties in order to identify the modes and quantify their relative power levels. Because of the coherent nature of the measurement, it is far more sensitive to changes in beam properties due to the mode content in the beam than is the more traditional M2 measurement for characterizing beam quality. We refer to the measurement as Spatially and Spectrally resolved imaging of mode content in fibers, or more simply as S2 imaging.

445 citations

Journal ArticleDOI
TL;DR: In this article, the authors demonstrate robust single-transverse-mode light propagation in higher-order modes of a fiber, with effective area Aeff ranging from 2100 to 3200 μm2.
Abstract: We demonstrate robust single-transverse-mode light propagation in higher-order modes of a fiber, with effective area Aeff ranging from 2100 to 3200 μm2. These modes are accessed using long-period fiber gratings that enable higher-order-mode excitation over a bandwidth of 94 mm with greater than 99% of the light in the desired mode. The fiber is designed such that the effective index separation between modes is always large, hence minimizing in-fiber mode mixing and enabling light propagation over lengths as large as 12 m, with bends down to 4.5 cm radii. The modal stability increases with mode order, suggesting that Aeff of this platform is substantially scalable.

234 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe the physics and properties of a novel optical fiber that would be attractive for building high-power fiber lasers and amplifiers, and demonstrate that for applications requiring meter-length fibers, signal stability actually increases with mode order.
Abstract: This paper describes the physics and properties of a novel optical fiber that would be attractive for building high-power fiber lasers and amplifiers. Instead of propagating light in the fundamental, Gaussian-shaped mode, we describe a fiber in which the signal is forced to travel in a single, desired higher order mode (HOM). This provides for several advantages over the conventional approach, ranging from significantly higher ability to scale mode areas (and hence laser powers) to managing dispersion for ultra-short pulses - a capability that is practically nonexistent in conventional fibers. Particularly interesting is the tact that this approach challenges conventional wisdom, and demonstrates that for applications requiring meter-length fibers (as in high-power lasers), signal stability actually increases with mode order. Using this approach, we demonstrate mode areas exceeding 3200 μm 2 , and propagate signals with negligible mode distortions over up to 50-meter lengths. We describe several pulse propagation experiments in which we test the nonlinear response of this fiber platform, ranging from managing dispersive effects in femtosecond pulse systems, to reducing Brillouin scattering impairments in systems operating with the nanosecond pulses.

175 citations

Journal ArticleDOI
TL;DR: An all-solid (nonholey), silica-based fiber with anomalous dispersion at wavelengths where silica material dispersion is negative is demonstrated, achieved by exploiting the enhanced dispersion engineering capabilities of higher-order modes in a fiber.
Abstract: We demonstrate an all-solid (nonholey), silica-based fiber with anomalous dispersion at wavelengths where silica material dispersion is negative. This is achieved by exploiting the enhanced dispersion engineering capabilities of higher-order modes in a fiber, yielding +60 ps/nm km dispersion at 1080 nm. By coupling to the desired higher-order mode with low-loss in-fiber gratings, we realize a 5 m long fiber module with a 300 fs/nm dispersion that yields a 1 dB bandwidth of 51 nm with an insertion loss of ∼0.1 dB at the center wavelength of 1080 nm. We demonstrate its functionality as a critical enabler for an all-fiber, Yb-based, mode-locked femtosecond ring laser.

108 citations

Journal ArticleDOI
TL;DR: In this paper, an ionic self-assembled multilayers (ISAM) adsorbed on long period gratings (LPGs) function effectively as biosensors using biotin-streptavidin as a demonstration bioconjugate pair.
Abstract: We demonstrate that ionic self-assembled multilayers (ISAMs) adsorbed on long period gratings (LPGs) function effectively as biosensors using biotin–streptavidin as a demonstration bioconjugate pair. Biotin, streptavidin, and anti-streptavidin were deposited onto the ISAM-coated LPG sequentially, each inducing a measurable resonant wavelength shift of the LPG. Control experiments verified the specificity of the biosensor system. Furthermore, we demonstrate that ISAM coated turnaround point LPGs could serve as highly sensitive biosensors that exhibit a change in transmitted intensity rather than resonant wavelength. Experimental measurements confirm that ISAM-coated LPGs provide an attractive platform for building efficient and high-performance optical sensors.

98 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors summarized the simultaneous transmission of several independent spatial channels of light along optical fibres to expand the data-carrying capacity of optical communications, and showed that the results achieved in both multicore and multimode optical fibers are documented.
Abstract: This Review summarizes the simultaneous transmission of several independent spatial channels of light along optical fibres to expand the data-carrying capacity of optical communications. Recent results achieved in both multicore and multimode optical fibres are documented.

2,629 citations

Journal ArticleDOI
28 Jun 2013-Science
TL;DR: The viability of using the orbital angular momentum (OAM) of light to create orthogonal, spatially distinct streams of data-transmitting channels that are multiplexed in a single fiber is demonstrated and suggest that OAM could provide an additional degree of freedom for data multiplexing in future fiber networks.
Abstract: Internet data traffic capacity is rapidly reaching limits imposed by optical fiber nonlinear effects Having almost exhausted available degrees of freedom to orthogonally multiplex data, the possibility is now being explored of using spatial modes of fibers to enhance data capacity We demonstrate the viability of using the orbital angular momentum (OAM) of light to create orthogonal, spatially distinct streams of data-transmitting channels that are multiplexed in a single fiber Over 11 kilometers of a specially designed optical fiber that minimizes mode coupling, we achieved 400-gigabits-per-second data transmission using four angular momentum modes at a single wavelength, and 16 terabits per second using two OAM modes over 10 wavelengths These demonstrations suggest that OAM could provide an additional degree of freedom for data multiplexing in future fiber networks

2,343 citations

Journal ArticleDOI
TL;DR: This paper reviews the current state of the art in terms of continuous-wave and pulsed performance of ytterbium-doped fiber lasers, the current fiber gain medium of choice, and by far the most developed in Terms of high-power performance.
Abstract: The rise in output power from rare-earth-doped fiber sources over the past decade, via the use of cladding-pumped fiber architectures, has been dramatic, leading to a range of fiber-based devices with outstanding performance in terms of output power, beam quality, overall efficiency, and flexibility with regard to operating wavelength and radiation format. This success in the high-power arena is largely due to the fiber’s geometry, which provides considerable resilience to the effects of heat generation in the core, and facilitates efficient conversion from relatively low-brightness diode pump radiation to high-brightness laser output. In this paper we review the current state of the art in terms of continuous-wave and pulsed performance of ytterbium-doped fiber lasers, the current fiber gain medium of choice, and by far the most developed in terms of high-power performance. We then review the current status and challenges of extending the technology to other rare-earth dopants and associated wavelengths of operation. Throughout we identify the key factors currently limiting fiber laser performance in different operating regimes—in particular thermal management, optical nonlinearity, and damage. Finally, we speculate as to the likely developments in pump laser technology, fiber design and fabrication, architectural approaches, and functionality that lie ahead in the coming decade and the implications they have on fiber laser performance and industrial/scientific adoption.

1,689 citations

Journal ArticleDOI
TL;DR: In this article, simultaneous transmission of six spatial and polarization modes, each carrying 40 Gb/s quadrature-phase-shift-keyed channels over 96 km of a low-differential group delay few-mode fiber, is reported.
Abstract: We report simultaneous transmission of six spatial and polarization modes, each carrying 40 Gb/s quadrature-phase-shift-keyed channels over 96 km of a low-differential group delay few-mode fiber. The channels are successfully recovered by offline DSP based on coherent detection and multiple-input multiple-output processing. A penalty of ;28 dB.

901 citations

Journal ArticleDOI
TL;DR: An overview of the state of the art in the field can be found in this paper, where the authors discuss present challenges and the future outlook of high-power fiber laser applications.
Abstract: High-power fibre lasers are in demand for industrial, defence and scientific applications. This review provides an overview of the present state of the art in the field and discusses present challenges and the future outlook.

781 citations