scispace - formally typeset
Search or ask a question
Author

Samit K. Ray

Bio: Samit K. Ray is an academic researcher from Indian Institute of Technology Kharagpur. The author has contributed to research in topics: Photoluminescence & Thin film. The author has an hindex of 44, co-authored 507 publications receiving 8085 citations. Previous affiliations of Samit K. Ray include University of Delaware & Indian Institute of Technology Kanpur.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, nanostructured tin oxide thin films were deposited on the Si (100) substrate using the pulsed laser deposition technique at different substrate temperatures (300, 450 and 600 Ã 0 ) in an oxygen atmosphere.

45 citations

Journal ArticleDOI
TL;DR: In this article, a microwave plasma discharge at very low temperatures (200-250°C) has been used for the growth of thin silicon oxynitride films suitable for gate dielectric applications.
Abstract: A microwave plasma discharge at very low temperatures (200–250 °C) has been used for the growth of thin silicon oxynitride films suitable for gate dielectric applications. The addition of CHF3 as a source of fluorine enhances the growth rate. A x‐ray photoelectron spectroscopy study indicates the incorporation of fluorine (F/Si≂0.2) in the film. Electrical properties of the grown layers have been evaluated by the characterization of metal‐insulator‐semiconductor capacitors. Results have indicated the presence of negative charges in the insulator. The estimated charge density is lowest for the fluorinated film. The conduction mechanism in the films at room temperature appears to be Frenkel–Poole type.

44 citations

Journal ArticleDOI
TL;DR: Pentacene based junctions with Al on both p-Si(1 0 0) and indium tin oxide (ITO) substrates have been analyzed using impedance spectroscopy (100 Hz-20 MHz) and dc-current versus voltage measurements.
Abstract: Pentacene based junctions with Al on both p-Si(1 0 0) and indium tin oxide (ITO) substrates have been analysed using impedance spectroscopy (100 Hz–20 MHz) and dc-current versus voltage measurements. Conduction mechanisms match well with the space charge limited current model with exponential trap charge distributions. Impedance studies reveal the Schottky behaviour for both the devices. The differences between p-Si/pentacene/Al and ITO/pentacene/Al devices have been explained by modelling equivalent circuits, with one and two RC elements, respectively. The switch-over field from ohmic conduction to space charge limited conduction, charge concentration as a function of voltage and bias dependent series resistance have been estimated for both the cases.

44 citations

Journal ArticleDOI
TL;DR: In this article, a dip pen nanolithographic (DPN) technique was used on SOI (silicon on insulator) CMOS MEMS (micro electro mechanical system) micro-hotplates (MHP) for the deposition of zinc oxide (ZnO) nanorods.
Abstract: This paper reports on the novel deposition of zinc oxide (ZnO) nanorods using a dip pen nanolithographic (DPN) technique on SOI (silicon on insulator) CMOS MEMS (micro electro mechanical system) micro-hotplates (MHP) and their characterisation as a low-cost, low-power ethanol sensor. The ZnO nanorods were synthesized hydrothermally and deposited on the MHP that comprise a tungsten micro-heater embedded in a dielectric membrane with gold interdigitated electrodes (IDEs) on top of an oxide passivation layer. The micro-heater and IDEs were used to heat up the sensing layer and measure its resistance, respectively. The sensor device is extremely power efficient because of the thin SOI membrane. The electro-thermal efficiency of the MHP was found to be 8.2 °C mW−1, which results in only 42.7 mW power at an operating temperature of 350 °C. The CMOS MHP devices with ZnO nanorods were exposed to PPM levels of ethanol in humid air. The sensitivity achieved from the sensor was found to be 5.8% ppm−1 to 0.39% ppm−1 for the ethanol concentration range 25–1000 ppm. The ZnO nanorods showed an optimum response at 350 °C. The CMOS sensor was found to have a humidity dependence that needs consideration in real-world application. The sensors were also found to be selective towards ethanol when tested in the presence of toluene and acetone. We believe that the integration of ZnO nanorods using DPN lithography with a CMOS MEMS substrate offers a low cost, low power, smart ethanol sensor that could be exploited in consumer electronics.

44 citations

Journal ArticleDOI
TL;DR: Selectivity measurements showed that the sensors were selective towards ethanol when they were exposed to acetone and toluene, and the devices were characterised by exposure to ethanol vapour in humid air in the concentration range of 100-1000 ppm.
Abstract: Here we report on the mask-less deposition of Au-SnO2 nanocomposites with a silicon-on-insulator (SOI) complementary metal oxide semiconductor (CMOS) micro electro mechanical system (MEMS) platform through the use of dip pen nanolithography (DPN) to create a low-cost ethanol sensor. MEMS technology is used in order to achieve low power consumption, by the employment of a membrane structure formed using deep reactive ion etching technique. The device consists of an embedded tungsten micro-heater with gold interdigitated electrodes on top of the SOI membrane. The tungsten micro-heater is used to raise the membrane temperature up to its operating temperature and the electrodes are used to measure the resistance of the nanocomposite sensing layer. The CMOS MEMS devices have high electro-thermal efficiency, with 8.2 °C temperature increase per mW power of consumption. The sensing material (Au-SnO2 nanocomposite) was synthesised starting from SnO nanoplates, then Au nanoparticles were attached chemically to the surface of SnO nanoplates, finally the mixture was heated at 700 °C in an oven in air for 4 h. This composite material was sonicated for 2 h in terpineol to make a viscous homogeneous slurry and then 'written' directly across the electrode area using the DPN technique without any mask. The devices were characterised by exposure to ethanol vapour in humid air in the concentration range of 100-1000 ppm. The sensitivity varied from 1.2 to 0.27 ppm(-1) for 100-1000 ppm of ethanol at 10% relative humid air. Selectivity measurements showed that the sensors were selective towards ethanol when they were exposed to acetone and toluene.

43 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each that are among the hottest research topics of the last decades.
Abstract: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

3,720 citations

01 Jan 2016
TL;DR: The principles of fluorescence spectroscopy is universally compatible with any devices to read and is available in the digital library an online access to it is set as public so you can download it instantly.
Abstract: Thank you very much for downloading principles of fluorescence spectroscopy. As you may know, people have look hundreds times for their favorite novels like this principles of fluorescence spectroscopy, but end up in malicious downloads. Rather than reading a good book with a cup of tea in the afternoon, instead they cope with some harmful bugs inside their desktop computer. principles of fluorescence spectroscopy is available in our digital library an online access to it is set as public so you can download it instantly. Our digital library spans in multiple locations, allowing you to get the most less latency time to download any of our books like this one. Kindly say, the principles of fluorescence spectroscopy is universally compatible with any devices to read.

2,960 citations

Journal ArticleDOI
TL;DR: In this paper, the dominant electronic and chemical mechanisms that influence the performance of metal-oxide-based resistive-type gas sensors are discussed, including p-n and n-n potential barrier manipulation, n-p-n response type inversions, spillover effects, synergistic catalytic behavior, and microstructure enhancement.
Abstract: Metal oxide-based resistive-type gas sensors are solid-state devices which are widely used in a number of applications from health and safety to energy efficiency and emission control. Nanomaterials such as nanowires, nanorods, and nanoparticles have dominated the research focus in this field due to their large number of surface sites facilitating surface reactions. Previous studies have shown that incorporating two or more metal oxides to form a heterojunction interface can have drastic effects on gas sensor performance, especially the selectivity. Recently, these effects have been amplified by designing heterojunctions on the nano-scale. These designs have evolved from mixed commercial powders and bi-layer films to finely-tuned core–shell and hierarchical brush-like nanocomposites. This review details the various morphological classes currently available for nanostructured metal-oxide based heterojunctions and then presents the dominant electronic and chemical mechanisms that influence the performance of these materials as resistive-type gas sensors. Mechanisms explored include p–n and n–n potential barrier manipulation, n–p–n response type inversions, spill-over effects, synergistic catalytic behavior, and microstructure enhancement. Tables are presented summarizing these works specifically for SnO2, ZnO, TiO2, In2O3, Fe2O3, MoO3, Co3O4, and CdO-based nanocomposites. Recent developments are highlighted and likely future trends are explored.

1,392 citations

Journal ArticleDOI
01 Mar 1994-Nature
TL;DR: It is clear that the above can lead to confusion when scientists of different countries are trying to communicate with each other, so an internationally recognized system of naming organisms is created.
Abstract: It is clear that the above can lead to confusion when scientists of different countries are trying to communicate with each other. Another example is the burrowing rodent called a gopher found throughout the western United States. In the southeastern United States the term gopher refers to a burrowing turtle very similar to the desert tortoise found in the American southwest. One final example; two North American mammals known as the elk and the caribou are known in Europe as the reindeer and the elk. We never sing “Rudolph the Red-nosed elk”! Confused? This was the reason for creating an internationally recognized system of naming organisms. To avoid confusion, living organisms are assigned a scientific name based on Latin or Latinized words. The English sparrow is Passer domesticus or Passer domesticus (italics or underlining these two names is the official written representation of a scientific name). Using a uniform naming system allows scientists from all over the world to recognize exactly which life form a scientist is referring to. The naming process is called the binomial system of nomenclature. Passer is comparable to a surname and is called the genus, while domesticus is the specific or species name (like your given name) of the English sparrow. Now scientists can give all sparrow-like birds the genus Passer but the species name will vary. All similar genera (plural for genus) can be grouped into another, “higher” category (see below). Study the following for a more through understanding of taxonomy. Taxonomy Analogy Kingdom: Animalia Country

1,305 citations

Journal ArticleDOI
TL;DR: This critical review assesses the recent developments in the use of graphene-based materials as sorbent or photocatalytic materials for environmental decontamination, as building blocks for next generation water treatment and desalination membranes, and as electrode materials for contaminant monitoring or removal.
Abstract: Graphene-based materials are gaining heightened attention as novel materials for environmental applications The unique physicochemical properties of graphene, notably its exceptionally high surface area, electron mobility, thermal conductivity, and mechanical strength, can lead to novel or improved technologies to address the pressing global environmental challenges This critical review assesses the recent developments in the use of graphene-based materials as sorbent or photocatalytic materials for environmental decontamination, as building blocks for next generation water treatment and desalination membranes, and as electrode materials for contaminant monitoring or removal The most promising areas of research are highlighted, with a discussion of the main challenges that we need to overcome in order to fully realize the exceptional properties of graphene in environmental applications

1,158 citations