scispace - formally typeset
Search or ask a question
Author

Samuel Graham

Bio: Samuel Graham is an academic researcher from Georgia Institute of Technology. The author has contributed to research in topics: Thermal conductivity & Thermal resistance. The author has an hindex of 48, co-authored 347 publications receiving 9774 citations. Previous affiliations of Samuel Graham include Merck & Co. & United States Military Academy.


Papers
More filters
Journal ArticleDOI
20 Apr 2012-Science
TL;DR: It is shown that surface modifiers based on polymers containing simple aliphatic amine groups substantially reduce the work function of conductors including metals, transparent conductive metal oxides, conducting polymers, and graphene.
Abstract: Organic and printed electronics technologies require conductors with a work function that is sufficiently low to facilitate the transport of electrons in and out of various optoelectronic devices. We show that surface modifiers based on polymers containing simple aliphatic amine groups substantially reduce the work function of conductors including metals, transparent conductive metal oxides, conducting polymers, and graphene. The reduction arises from physisorption of the neutral polymer, which turns the modified conductors into efficient electron-selective electrodes in organic optoelectronic devices. These polymer surface modifiers are processed in air from solution, providing an appealing alternative to chemically reactive low–work function metals. Their use can pave the way to simplified manufacturing of low-cost and large-area organic electronic technologies.

1,870 citations

Journal ArticleDOI
TL;DR: The UWBG semiconductor materials, such as high Al‐content AlGaN, diamond and Ga2O3, advanced in maturity to the point where realizing some of their tantalizing advantages is a relatively near‐term possibility.
Abstract: J. Y. Tsao,* S. Chowdhury, M. A. Hollis,* D. Jena, N. M. Johnson, K. A. Jones, R. J. Kaplar,* S. Rajan, C. G. Van de Walle, E. Bellotti, C. L. Chua, R. Collazo, M. E. Coltrin, J. A. Cooper, K. R. Evans, S. Graham, T. A. Grotjohn, E. R. Heller, M. Higashiwaki, M. S. Islam, P. W. Juodawlkis, M. A. Khan, A. D. Koehler, J. H. Leach, U. K. Mishra, R. J. Nemanich, R. C. N. Pilawa-Podgurski, J. B. Shealy, Z. Sitar, M. J. Tadjer, A. F. Witulski, M. Wraback, and J. A. Simmons

785 citations

Journal ArticleDOI
TL;DR: In this paper, a thermal resistor network model was combined with a 3D finite element submodel of an LED structure to predict system and die level temperatures, and the impact of LED array density, LED power density, and active versus passive cooling methods on device operation was calculated.

294 citations

Journal ArticleDOI
TL;DR: In this paper, the authors describe detailed mechanical, electrical, and thermal characterization and calibration of AFM cantilevers having integrated solid-state heaters, which have been applied to metrology, thermophysical property measurements, and nanoscale manufacturing.
Abstract: Silicon atomic force microscope (AFM) cantilevers having integrated solid-state heaters were originally developed for application to data storage, but have since been applied to metrology, thermophysical property measurements, and nanoscale manufacturing. These applications beyond data storage have strict requirements for mechanical characterization and precise temperature calibration of the cantilever. This paper describes detailed mechanical, electrical, and thermal characterization and calibration of AFM cantilevers having integrated solid-state heaters. Analysis of the cantilever response to electrical excitation in both time and frequency domains aids in resolving heat transfer mechanisms in the cantilever. Raman spectroscopy provides local temperature measurement along the cantilever with resolution near 1 mum and 5degC and also provides local surface stress measurements. Observation of the cantilever mechanical thermal noise spectrum at room temperature and while heated provides insight into cantilever mechanical behavior and compares well with finite-element analysis. The characterization and calibration methodology reported here expands the use of heated AFM cantilevers, particularly the uses for nanomanufacturing and sensing

232 citations

Journal ArticleDOI
TL;DR: In this paper, the effectiveness of p-doping transparent single-walled carbon nanotube (SWNT) films via chemical treatment with HNO 3 and SOCl 2 was evaluated.
Abstract: This paper evaluates the effectiveness of p-doping transparent single-walled carbon nanotube (SWNT) films via chemical treatment with HNO 3 and SOCl 2 . Stability of the improvement in electrical conductivity after doping is investigated for different doping treatments as a function of exposure time to air and as a function of temperature. Doped films were found to have a greater than twofold increase in conductivity with sheet resistance values as low as 105 Ω sq -1 with an optical transmittance of 80% at 550 nm. However, doping enhancements demonstrated limited stability in air and under thermal loading. The application of a thin capping layer of PEDOT/PSS is shown to stabilize the improvements in conductivity, evidenced by sustained lower sheet resistance in both air and under thermal loading.

190 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

Journal ArticleDOI
01 Aug 2014-Science
TL;DR: Perovskite films received a boost in photovoltaic efficiency through controlled formation of charge-generating films and improved current transfer to the electrodes and low-temperature processing steps allowed the use of materials that draw current out of the perovskites layer more efficiently.
Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.

5,789 citations

Journal ArticleDOI
TL;DR: A novel non-fullerene electron acceptor (ITIC) that overcomes some of the shortcomings of fullerene acceptors, for example, weak absorption in the visible spectral region and limited energy-level variability, is designed and synthesized.
Abstract: A novel non-fullerene electron acceptor (ITIC) that overcomes some of the shortcomings of fullerene acceptors, for example, weak absorption in the visible spectral region and limited energy-level variability, is designed and synthesized. Fullerene-free polymer solar cells (PSCs) based on the ITIC acceptor are demonstrated to exhibit power conversion effi ciencies of up to 6.8%, a record for fullerene-free PSCs.

3,048 citations