scispace - formally typeset
Search or ask a question
Author

Samuel Graham

Bio: Samuel Graham is an academic researcher from Georgia Institute of Technology. The author has contributed to research in topics: Thermal conductivity & Thermal resistance. The author has an hindex of 48, co-authored 347 publications receiving 9774 citations. Previous affiliations of Samuel Graham include Merck & Co. & United States Military Academy.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the overall barrier performance of multilayer thin-films and the shelf lifetime of encapsulated organic solar cells were correlated through the total amount of water vapor that permeated into the solar cell.

80 citations

Journal ArticleDOI
16 Nov 2017
TL;DR: In this paper, the authors show that the character of phonons changes dramatically within the first few percent of impurity concentration, beyond which phonons more closely resemble the modes found in amorphous materials.
Abstract: Current understanding of phonons treats them as plane waves/quasi-particles of atomic vibration that propagate and scatter. The problem is that conceptually, when any level of disorder is introduced, whether compositional or structural, the character of vibrational modes in solids changes, yet nearly all theoretical treatments continue to assume phonons are still waves. For example, the phonon contributions to alloy thermal conductivity (TC) rely on this assumption and are most often computed from the virtual crystal approximation (VCA). Good agreement is obtained in some cases, but there are many instances where it fails—both quantitatively and qualitatively. Here, we show that the conventional theory and understanding of phonons requires revision, because the critical assumption that all phonons/normal modes resemble plane waves with well-defined velocities is no longer valid when disorder is introduced. Here we show, surprisingly, that the character of phonons changes dramatically within the first few percent of impurity concentration, beyond which phonons more closely resemble the modes found in amorphous materials. We then utilize a different theory that can treat modes with any character and experimentally confirm its new insights. In solids, atoms continuously vibrate in collective motions with quantized amplitudes that can be described in terms of quasiparticles known as phonons—which are responsible for heat transfer and sound. Phonons are usually treated as waves that propagate and scatter, but this approach can sometimes fail when dealing with materials with disorder. A team of researchers from the Georgia Institute of Technology, led by Asegun Henry, show that by focussing on phonon correlation rather than scattering, it is possible to more accurately capture the changes in vibrational mode behavior as a function of disorder.

80 citations

Journal ArticleDOI
TL;DR: In vitro autoradiography studies on rhesus monkey brain slices identified the highest level of binding in the cerebellum, brainstem, and meninges, and the in vivo cerebrospinal fluid/plasma ratio was determined to be 2 to 3% in cisterna magna-ported rhesUS monkeys.
Abstract: Calcitonin gene-related peptide (CGRP) has long been hypothesized to play a key role in migraine pathophysiology, and the advent of small-molecule antagonists has clearly demonstrated a clinical link between blocking the CGRP receptor and migraine efficacy. 2-[(8R)-8-(3,5-Difluorophenyl)-10-oxo-6,9-diazaspiro[4.5]dec-9-yl]-N-[(2R)-2'-oxo-1,1',2',3-tetrahydrospiro[indene-2,3'-pyrrolo[2,3-b]pyridin]-5-yl]acetamide (MK-3207) represents the third CGRP receptor antagonist to display clinical efficacy in migraine trials. Here, we report the pharmacological characterization of MK-3207, a potent and orally bioavailable CGRP receptor antagonist. In vitro, MK-3207 is a potent antagonist of the human and rhesus monkey CGRP receptors (K(i) = 0.024 nM). In common with other CGRP receptor antagonists, MK-3207 displays lower affinity for CGRP receptors from other species, including canine and rodent. As a consequence of species selectivity, the in vivo potency was assessed in a rhesus monkey pharmacodynamic assay measuring capsaicin-induced changes in forearm dermal blood flow via laser Doppler imaging. MK-3207 produced a concentration-dependent inhibition of dermal vasodilation, with plasma concentrations of 0.8 and 7 nM required to block 50 and 90% of the blood flow increase, respectively. The tritiated analog [3H]MK-3207 was used to study the binding characteristics on the human CGRP receptor. [3H]MK-3207 displayed reversible and saturable binding (K(D) = 0.06 nM), and the off-rate was determined to be 0.012 min(-1), with a t(1/2) value of 59 min. In vitro autoradiography studies on rhesus monkey brain slices identified the highest level of binding in the cerebellum, brainstem, and meninges. Finally, as an index of central nervous system penetrability, the in vivo cerebrospinal fluid/plasma ratio was determined to be 2 to 3% in cisterna magna-ported rhesus monkeys.

76 citations

Journal ArticleDOI
TL;DR: In this article, the authors investigate the thermal boundary resistance and thermal conductivity of GaN layers grown on Si with 100 nm AlN transition layers using time domain thermoreflectance (TDTR).
Abstract: In this work, we investigate the thermal boundary resistance and thermal conductivity of GaN layers grown on Si with 100 nm AlN transition layers using time domain thermoreflectance (TDTR). The GaN layers ranged from 0.31 to 1.27 μm. Due to the challenges in determining the thermal boundary resistance of the buried interfaces found in this architecture, a new data reduction scheme for TDTR that utilizes a Monte Carlo fitting method is introduced and found to dramatically reduce the uncertainty in certain model parameters. The results show that the GaN thermal conductivity does not change significantly with layer thickness, whereas the resistance of the AlN layer decreases slightly with GaN thickness.

75 citations

Journal ArticleDOI
TL;DR: In this article, the Stokes peak position, linewidth, and Stokes to anti-Stokes intensity ratio were used to estimate the temperature of gallium nitride (GaN) devices during operation.
Abstract: Raman thermometry is often utilized to measure temperature in gallium nitride (GaN) electronics. However, the accuracy of the technique is subject to errors arising from stresses which develop during device operation as a result of both thermoelastic and inverse piezoelectric effects. To assess the implications of these stresses on Raman thermometry, we investigate the use of the Stokes peak position, linewidth, and Stokes to anti-Stokes intensity ratio to estimate the temperature of GaN devices during operation. Our results indicate that only temperature measurements obtained from the intensity ratio method are independent of these stresses. Measurements using the linewidth, meanwhile, were found to correspond well with those obtained from the intensity ratio through the use of a reference condition which accounted for the stress dependency of this spectral component. These results were then compared to a three dimensional finite element model which yielded a correlation to within 5% between the computat...

74 citations


Cited by
More filters
Journal ArticleDOI

[...]

08 Dec 2001-BMJ
TL;DR: There is, I think, something ethereal about i —the square root of minus one, which seems an odd beast at that time—an intruder hovering on the edge of reality.
Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

33,785 citations

01 May 1993
TL;DR: Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems.
Abstract: Three parallel algorithms for classical molecular dynamics are presented. The first assigns each processor a fixed subset of atoms; the second assigns each a fixed subset of inter-atomic forces to compute; the third assigns each a fixed spatial region. The algorithms are suitable for molecular dynamics models which can be difficult to parallelize efficiently—those with short-range forces where the neighbors of each atom change rapidly. They can be implemented on any distributed-memory parallel machine which allows for message-passing of data between independently executing processors. The algorithms are tested on a standard Lennard-Jones benchmark problem for system sizes ranging from 500 to 100,000,000 atoms on several parallel supercomputers--the nCUBE 2, Intel iPSC/860 and Paragon, and Cray T3D. Comparing the results to the fastest reported vectorized Cray Y-MP and C90 algorithm shows that the current generation of parallel machines is competitive with conventional vector supercomputers even for small problems. For large problems, the spatial algorithm achieves parallel efficiencies of 90% and a 1840-node Intel Paragon performs up to 165 faster than a single Cray C9O processor. Trade-offs between the three algorithms and guidelines for adapting them to more complex molecular dynamics simulations are also discussed.

29,323 citations

Journal ArticleDOI
01 Aug 2014-Science
TL;DR: Perovskite films received a boost in photovoltaic efficiency through controlled formation of charge-generating films and improved current transfer to the electrodes and low-temperature processing steps allowed the use of materials that draw current out of the perovskites layer more efficiently.
Abstract: Advancing perovskite solar cell technologies toward their theoretical power conversion efficiency (PCE) requires delicate control over the carrier dynamics throughout the entire device. By controlling the formation of the perovskite layer and careful choices of other materials, we suppressed carrier recombination in the absorber, facilitated carrier injection into the carrier transport layers, and maintained good carrier extraction at the electrodes. When measured via reverse bias scan, cell PCE is typically boosted to 16.6% on average, with the highest efficiency of ~19.3% in a planar geometry without antireflective coating. The fabrication of our perovskite solar cells was conducted in air and from solution at low temperatures, which should simplify manufacturing of large-area perovskite devices that are inexpensive and perform at high levels.

5,789 citations

Journal ArticleDOI
TL;DR: A novel non-fullerene electron acceptor (ITIC) that overcomes some of the shortcomings of fullerene acceptors, for example, weak absorption in the visible spectral region and limited energy-level variability, is designed and synthesized.
Abstract: A novel non-fullerene electron acceptor (ITIC) that overcomes some of the shortcomings of fullerene acceptors, for example, weak absorption in the visible spectral region and limited energy-level variability, is designed and synthesized. Fullerene-free polymer solar cells (PSCs) based on the ITIC acceptor are demonstrated to exhibit power conversion effi ciencies of up to 6.8%, a record for fullerene-free PSCs.

3,048 citations