Showing papers by "Sandro Barone published in 2019"

Biomechanical Effects of Different Auxiliary-Aligner Designs for the Extrusion of an Upper Central Incisor: A Finite Element Analysis.

Abstract: Aim. To evaluate the biomechanical effects of four different auxiliary-aligner combinations for the extrusion of a maxillary central incisor and to define the most effective design through finite element analysis (FEA). Materials and Methods. A full maxillary arch (14 teeth) was modelled by combining two different imaging techniques: cone beam computed tomography and surface-structured light scan. The appliance and auxiliary element geometries were created by exploiting computer-aided design (CAD) procedures. The reconstructed digital models were imported within the finite element solver (Ansys® 17). For the extrusion movement, the authors compared the aligner without an attachment with three auxiliary-aligner designs: a rectangular palatal attachment, a rectangular buccal attachment, and an ellipsoid buccal attachment. The resulting force-moment (MF) system delivered by the aligner to the target tooth and the tooth displacement were calculated for each scenario. Results. The maximum tooth displacement along the z-axis (0.07 mm) was obtained with the rectangular palatal attachment, while the minimum (0.02 mm) was obtained without any attachments. With the ellipsoid attachment, the highest undesired moments Mx and My were found. The rectangular palatal attachment showed the highest Fz (2.0 N) with the lowest undesired forces (Fx = 0.4 N; Fy = −0.2 N). Conclusions. FEA demonstrated that the rectangular palatal attachment can improve the effectiveness of the appliance for the extrusion of an upper central incisor.

Optical Stereo-System for Full-Field High-Frequency 3D Vibration Measurements Based on Low-Frame-Rate Cameras

Abstract: Dynamic characterization of vibrating targets represents a critical issue for many industrial fields. In this paper, a stereo-camera system integrated with a Digital Image Correlation (DIC) algorithm is proposed with the aim at performing 3D full-field vibration measurements in the range of kHz. The system exploits two industrial low-speed cameras, and the Nyquist-Shannon frequency limitation is overcome by a down-sampling approach under the hypothesis that the vibration signal is characterized by a single known frequency component. Experimental results obtained from the measurement of vibrational responses of a cantilever plate excited at three high-frequency resonance values (1121 Hz, 2956 Hz and 4010 Hz) are provided. A comparison with numerical analyses evidences the effectiveness of the proposed approach.

Properties Enhancement of Carbon PA 3D-Printed Parts by Post-processing Coating-Based Treatments

Abstract: In recent years, Fused Deposition Modelling (FDM) has become one of the most attractive Additive Manufacturing (AM) techniques, due to the advantages in the production of complex shapes with a wide range of materials and low investment costs. The thermoplastic polymers used for FDM technology are characterized by low mechanical properties if compared to those of composites and metals. This issue is usually overcome by reinforcing the thermoplastic polymer with chopped fibres or particles. Moreover, a second issue arises, which is represented by the water absorption with a relevant impact on mechanical properties and dimensional stability of printed models. In this paper, an experimental study is presented with the aim at evaluating the water absorption influence on mechanical properties of Carbon PA (Polyamide matrix reinforced with Carbon Fiber at 20%) specimens fabricated with the FDM technique. Two post-processing treatments, based on the use of acrylic spray and photosensitive resin, have been also proposed to improve the behaviour of Carbon PA printed parts. Results of water absorption tests and tensile tests demonstrated a significant improvement in terms of weight stability and mechanical properties by adopting the proposed post-processing treatments.