We report the first observation of interference in the light scattered from two trapped atoms ({sup 198}Hg{sup +} ions localized in a linear Paul trap). The visibility of the interference fringes can be explained in the frame-work of Bragg scattering by a harmonic crystal, but with important differences compared to the case of a large crystal. Comparison of the experimental data with theory shows that the interference pattern offers another method to determine ion temperatures and separations. Furthermore, by exploiting the atom`s internal structure we have found a way to obtain {open_quotes}which path{close_quotes} information without invoking the position-momentum uncertainty relation. If the light scattered by the atoms is detected in a polarization-sensitive way, then it is possible to selectively demonstrate either the particle-nature or the wave-nature of the scattered photons.

Young`s interference experiment with light scattered from two atoms

We present a quick, simple and accurate digital holographic characterization of the Bessel beams produced by polymeric microaxicons. This technique allows the numerical reconstruction of both intensity and phase of the beam at whichever point starting from a single acquired hologram. From these data, it is possible to go back to the axicon structure, and to gather information about their characteristics. In particular, the focal length and the depth of focus of the axicon lens are experimentally measured, and the full width at half maximum of the beam is obtained too. The depth of focus, very large for a Bessel beam with respect to a Gaussian one, is successfully exploited for optical trapping of micrometric objects.

https://iopscience.iop.org/article/10.1088/0957-0233/23/6/065204/pdf

Characterization of Bessel beams generated by polymeric microaxicons

A new laser differential reflection-confocal focal-length measurement (DRCFM) method is proposed for the high-accuracy measurement of the lens focal length. DRCFM uses weak light reflected from the lens last surface to determine the vertex position of this surface. Differential confocal technology is then used to identify precisely the lens focus and vertex of the lens last surface, thereby enabling the precise measurement of the lens focal length. Compared with existing measurement methods, DRCFM has high accuracy and strong anti-interference capability. Theoretical analyses and experimental results indicate that the DRCFM relative measurement error is less than 10 ppm.

Laser differential reflection-confocal focal-length measurement

A compact, fiber-coupled, six degree-of-freedom measurement system which enables fast, accurate calibration, and error mapping of precision linear stages is presented. The novel design has the advantages of simplicity, compactness, and relatively low cost. This proposed sensor can simultaneously measure displacement, two straightness errors, and changes in pitch, yaw, and roll using a single optical beam traveling between the measurement system and a small target. The optical configuration of the system and the working principle for all degrees-of-freedom are presented along with the influence and compensation of crosstalk motions in roll and straightness measurements. Several comparison experiments are conducted to investigate the feasibility and performance of the proposed system in each degree-of-freedom independently. Comparison experiments to a commercial interferometer demonstrate error standard deviations of 0.33 μm in straightness, 0.14 μrad in pitch, 0.44 μradin yaw, and 45.8 μrad in roll.

Development of a compact, fiber-coupled, six degree-of-freedom measurement system for precision linear stage metrology

A ring-shaped random laser in momentum space is designed by directly coupling a random laser with a commercial optical fiber. By using a simple approach of selectively coating the random gain layer on the surface of the fiber, red and yellow random lasers are respectively achieved with low threshold values and a good emission direction due to the guiding role of optical fibers. The unique coupling mechanism leads to a random laser with a ring shape in momentum space, which is an excellent illuminating source for high-quality imaging with an extremely low speckle noise. More importantly, a triple-state color-switchable random laser with yellow, red and yellow-red dual-colors can be flexible, and is obtained by simply moving the pump position. The results may promote the practical applications of random lasers in the fields of sensing, in vivo biological imaging, and high brightness full-field illumination.

A ring-shaped random laser in momentum space.

We present what we believe is a new technique for the focal-length measurement of positive lenses using Fizeau interferometery. The technique utilizes the Gaussian lens equation. The image distance is measured interferometrically in terms of the radius of curvature of the image-forming wavefront emerging from the lens. The radii of curvature of the image-forming wavefronts corresponding to two different axial object positions of known separation are measured. The focal length of the lens is determined by solving the equations obtained using the Gaussian lens equation for the two object positions. Results obtained for a corrected doublet lens of a nominal focal length of 200.0 mm with a measurement uncertainty of ±2.5% is presented.

Technique for the focal-length measurement of positive lenses using Fizeau interferometry

We present a technique for the measurement of roll angular displacement of a rotary stage using a lateral shearing cyclic path optical configuration (CPOC) setup and polarization phase shifting interferometry (PPSI). The CPOC setup, aligned on the rotary stage, laterally shears the input plane polarized spherical beam into a pair of orthogonally polarized beams, which when brought to the same state of polarization by a polarizer produce interference fringes similar to Young's fringes. Rotation of the CPOC setup in its plane introduces a phase change between the orthogonally polarized lateral sheared beams due to the change in angle of incidence of the input beam. The change in the phase results in spatial displacement of the interference fringes. Using PPSI, the phase, or the optical path difference change between the laterally sheared beams that is related to the rotation angle of the CPOC setup, is measured.

Small roll angle measurement using lateral shearing cyclic path polarization interferometry.

We present a measurement technique to determine the thickness of a transparent glass plate (GP) by using a lateral shearing cyclic path optical configuration (CPOC) setup and polarization phase shifting interferometry (PPSI). In the technique, the GP introduces a longitudinal shift in the focus of the beam and, as a result, a spherical wavefront emerges from the lens, which is otherwise set for producing a collimated beam. Using CPOC, two laterally sheared orthogonally polarized beams are generated from the incident spherical wavefront. By applying PPSI, the slope of the optical path difference variation between the laterally sheared interfering beams is evaluated, and the radius of the spherical wavefront and the longitudinal shift of the beam focus are calculated. The thickness of the GP is determined from the standard relation between the longitudinal shift of the focus introduced by the GP and the thickness of the GP. Results obtained for a GP of 9.810mm thickness are presented.

Thickness measurement of transparent glass plates using a lateral shearing cyclic path optical configuration setup and polarization phase shifting interferometry

We present a simple technique for simultaneous determination of refractive index and thickness of moderately thick plane-parallel transparent glass plates (GPs) using a cyclic path optical configuration (CPOC) setup and a wedge shear plate as lateral shearing interferometer. The CPOC setup is used to simultaneously focus the counterpropagating converging beams at a common point at its hypotenuse arm. The apparent thickness and real thickness of the test GP are determined by observing three retrocollimation positions of the GP surfaces with respect to the common focus point. The RI is obtained by dividing the real thickness with apparent thickness of the GP. Presented in this paper are the results obtained for a test GP with a thickness of 14.983 mm and a RI of 1.515.

Simultaneous determination of refractive index and thickness of moderately thick plane-parallel transparent glass plates using cyclic path optical configuration setup and a lateral shearing interferometer.

Sanjib Chatterjee

Papers

Technique for the focal-length measurement of positive lenses using Fizeau interferometry

Small roll angle measurement using lateral shearing cyclic path polarization interferometry.

Thickness measurement of transparent glass plates using a lateral shearing cyclic path optical configuration setup and polarization phase shifting interferometry

Simultaneous determination of refractive index and thickness of moderately thick plane-parallel transparent glass plates using cyclic path optical configuration setup and a lateral shearing interferometer.

Measurement of wedge angle of a transparent parallel plate using quasi-monochromatic light source and phase shifting interferometry