Author
Santiago Alonso
Bio: Santiago Alonso is an academic researcher from Spanish National Research Council. The author has contributed to research in topics: Calcium hydroxide & Metakaolin. The author has an hindex of 6, co-authored 6 publications receiving 1838 citations.
Topics: Calcium hydroxide, Metakaolin, Alkali metal, Hydroxide, Sodium hydroxide
Papers
More filters
TL;DR: The activation of fly ash/slag pastes with NaOH solutions has been studied in this paper, where the authors established the equations of the models describing the mechanical behaviour of these pastes as a function of the factors and levels considered.
745 citations
TL;DR: In this article, metakaolin activation is carried out with highly concentrated alkaline solutions in the presence of calcium hydroxide, the main reaction product is a sodium aluminosilicate similar to that obtained when metakain is activated in the absence of calcium hyroxide.
435 citations
TL;DR: In this paper, reaction products formed during alkaline activation, with 8M NaOH solutions, of fly ashes have been characterized with 29Si and 27Al magic-angle spinning nuclear magnetic resonance (MASNMR) spectroscopy.
Abstract: Reaction products formed during alkaline activation, with 8M NaOH solutions, of fly ashes have been characterized with 29Si and 27Al magic-angle spinning nuclear magnetic resonance (MASNMR) spectroscopy. In particular, the influence of curing conditions (time and temperature of reaction) has been analyzed. NMR results show the formation of amorphous tecto-silicates in which the amount of aluminum decreases in the two consecutive formed phases. The Si/Al ratio of zeolite precursor obtained at 85°C changes from 0.95 to 1.86 when curing time is increased from 5 h to 1 week. The evolution of the mechanical properties of prepared cements has also been discussed in terms of the phases formed and texture and morphology of samples.
407 citations
TL;DR: In this paper, a series of metakaolin mixes were activated in 1:1 proportion, with different sodium hydroxide concentrations: 5, 10, 12, 15 and 18 M at 45°C during 24 hours.
289 citations
TL;DR: In this article, metakaolin (MK) and (MK + Ca(OH) 2 ) mixes were activated with 5M and 12M NaOH solutions and cured at 45°C.
Abstract: The alkali activation of metakaolin (MK) leads to the production of high-mechanical-performance network-structure materials. Adding calcium hydroxide (Ca(OH) 2 ) to the raw MK produces a somewhat different reaction: a network structure and C-S-H gel form. In the present study, MK and (MK + Ca(OH) 2 ) mixes were activated with 5M and 12M NaOH solutions and cured at 45°C. A 5M concentration, in the absence of Ca(OH) 2 , did not produce MK activation within the test time. An activator concentration of 12M resulted in complete activation and the formation of a network structure. When Ca(OH) 2 was present in the raw mix, a small amount of C-S-H gel formed.
283 citations
Cited by
More filters
TL;DR: A brief history and review of geopolymer technology is presented with the aim of introducing the technology and the vast categories of materials that may be synthesized by alkali activation of aluminosilicates as mentioned in this paper.
Abstract: A brief history and review of geopolymer technology is presented with the aim of introducing the technology and the vast categories of materials that may be synthesized by alkali-activation of aluminosilicates. The fundamental chemical and structural characteristics of geopolymers derived from metakaolin, fly ash and slag are explored in terms of the effects of raw material selection on the properties of geopolymer composites. It is shown that the raw materials and processing conditions are critical in determining the setting behavior, workability and chemical and physical properties of geopolymeric products. The structural and chemical characteristics that are common to all geopolymeric materials are presented, as well as those that are determined by the specific interactions occurring in different systems, providing the ability for tailored design of geopolymers to specific applications in terms of both technical and commercial requirements.
3,302 citations
TL;DR: In this paper, the potential position of and drivers for inorganic polymers (“geopolymers”) as an element of the push for a sustainable concrete industry are discussed.
1,444 citations
TL;DR: Aluminosilicate-based alkaline cements have been classified into five categories as discussed by the authors, and the key advances made in the understanding of synthetic gels are discussed, which ultimately finds hybrid cements to be technologically viable materials for contemporary construction.
1,104 citations
TL;DR: In this paper, the authors present the work carried out on the chemical reaction, the source materials, and the factor affecting geopolymerization, and demonstrate that certain mix compositions and reaction conditions such as Al2O3/SiO2, alkali concentration, curing temperature with curing time, water/solid ratio and pH significantly influences the formation and properties of a geopolymers.
Abstract: Geopolymerization is a developing field of research for utilizing solid waste and by-products. It provides a mature and cost-effective solution to many problems where hazardous residue has to be treated and stored under critical environmental conditions. Geopolymer involves the silicates and aluminates of by-products to undergo process of geopolymerization. It is environmentally friendly and need moderate energy to produce. This review presents the work carried out on the chemical reaction, the source materials, and the factor affecting geopolymerization. Literature demonstrates that certain mix compositions and reaction conditions such as Al2O3/SiO2, alkali concentration, curing temperature with curing time, water/solid ratio and pH significantly influences the formation and properties of a geopolymer. It is utilized to manufacture precast structures and non-structural elements, concrete pavements, concrete products and immobilization of toxic metal bearing waste that are resistant to heat and aggressive environment. Geopolymers gain 70% of the final strength in first 3–4 h of curing.
1,078 citations
TL;DR: In this paper, the effects of ground granulated blast furnace slag (GGBFS) on the microstructure and mechanical properties of metakaolin (MK) based geopolymers were studied.
922 citations