Sarah A. Woller

Bio: Sarah A. Woller is an academic researcher from University of California, San Diego. The author has contributed to research in topics: Spinal cord injury & Neuropathic pain. The author has an hindex of 18, co-authored 29 publications receiving 885 citations. Previous affiliations of Sarah A. Woller include National Institutes of Health & Texas A&M University.

Rapid continuous 3D printing of customizable peripheral nerve guidance conduits.

Abstract: Engineered nerve guidance conduits (NGCs) have been demonstrated for repairing peripheral nerve injuries. However, there remains a need for an advanced biofabrication system to build NGCs with complex architectures, tunable material properties, and customizable geometrical control. Here, a rapid continuous 3D-printing platform was developed to print customizable NGCs with unprecedented resolution, speed, flexibility, and scalability. A variety of NGC designs varying in complexity and size were created including a life-size biomimetic branched human facial NGC. In vivo implantation of NGCs with microchannels into complete sciatic nerve transections of mouse models demonstrated the effective directional guidance of regenerating sciatic nerves via branching into the microchannels and extending toward the distal end of the injury site. Histological staining and immunostaining further confirmed the progressive directional nerve regeneration and branching behavior across the entire NGC length. Observational and functional tests, including the von Frey threshold test and thermal test, showed promising recovery of motor function and sensation in the ipsilateral limbs grafted with the 3D-printed NGCs.

The search for novel analgesics: targets and mechanisms.

Abstract: The management of the pain state is of great therapeutic relevance to virtually every medical specialty. Failure to manage its expression has deleterious consequence to the well-being of the organism. An understanding of the complex biology of the mechanisms underlying the processing of nociceptive information provides an important pathway towards development of novel and robust therapeutics. Importantly, preclinical models have been of considerable use in determining the linkage between mechanism and the associated behaviorally defined pain state. This review seeks to provide an overview of current thinking targeting pain biology, the use of preclinical models and the development of novel pain therapeutics. Issues pertinent to the strengths and weaknesses of current development strategies for analgesics are considered.

Inflammation is increased with anxiety- and depression-like signs in a rat model of spinal cord injury

Abstract: Spinal cord injury (SCI) leads to increased anxiety and depression in as many as 60% of patients. Yet, despite extensive clinical research focused on understanding the variables influencing psychological well-being following SCI, risk factors that decrease it remain unclear. We hypothesized that excitation of the immune system, inherent to SCI, may contribute to the decrease in psychological well-being. To test this hypothesis, we used a battery of established behavioral tests to assess depression and anxiety in spinally contused rats. The behavioral tests, and subsequent statistical analyses, revealed three cohorts of subjects that displayed behavioral characteristics of (1) depression, (2) depression and anxiety, or (3) no signs of decreased psychological well-being. Subsequent molecular analyses demonstrated that the psychological cohorts differed not only in behavioral symptoms, but also in peripheral (serum) and central (hippocampi and spinal cord) levels of pro-inflammatory cytokines. Subjects exhibiting a purely depression-like profile showed higher levels of pro-inflammatory cytokines peripherally, whereas subjects exhibiting a depression- and anxiety-like profile showed higher levels of pro-inflammatory cytokines centrally (hippocampi and spinal cord). These changes in inflammation were not associated with injury severity; suggesting that the association between inflammation and the expression of behaviors characteristic of decreased psychological well-being was not confounded by differential impairments in motor ability. These data support the hypothesis that inflammatory changes are associated with decreased psychological well-being following SCI.

Targeting toll-like receptor-4 (TLR4)-an emerging therapeutic target for persistent pain states.

Abstract: Toll-like receptors (TLRs) are a family of pattern recognition receptors that initiate signaling in innate and adaptive immune pathways. The highly conserved family of transmembrane proteins comprises an extracellular domain that recognizes exogenous and endogenous danger molecules and an ec

Intrathecal Morphine Attenuates Recovery of Function after a Spinal Cord Injury

Abstract: Prior work has shown that a high dose (20 mg/kg) of systemic morphine, required to produce significant analgesia in the acute phase of a contusion injury, undermines the long-term health of treated subjects and increases lesion size. Moreover, a single dose of systemic morphine in the early stage of injury (24 h post-injury) led to symptoms of neuropathic pain 3 weeks later, in the chronic phase. The present study examines the locus of the effects using intrathecal morphine administration. Subjects were treated with one of three doses (0, 30, or 90 microg) of intrathecal morphine 24 h after a moderate contusion injury. The 90-microg dose produced significant analgesia when subjects were exposed to noxious stimuli (thermal and incremented shock) below the level of injury. Yet, despite analgesic efficacy, intrathecal morphine significantly attenuated the recovery of locomotor function and increased lesion size rostral to the injury site. A single dose of 30 or 90 microg of intrathecal morphine also decreased weight gain, and more than doubled the incidence of mortality and autophagia when compared to vehicle-treated controls. Morphine is one of the most effective pharmacological agents for the treatment of neuropathic pain and, therefore, is indispensable for the spinally injured. Treatment can, however, adversely affect the recovery process. A morphine-induced attenuation of recovery may result from increases in immune cell activation and, subsequently, pro-inflammatory cytokine concentrations in the contused spinal cord.

Neuroscience 細胞死：最近の知見

Abstract: 中枢神経系疾患の治療は正常細胞（ニューロン）の機能維持を目的とするが，脳血管障害のように機能障害の原因が細胞の死滅に基づくことは多い．一方，脳腫瘍の治療においては薬物療法や放射線療法といった腫瘍細胞の死滅を目標とするものが大きな位置を占める．いずれの場合にも，細胞死の機序を理解することは各種病態や治療法の理解のうえで重要である．現在のところ最も研究の進んでいる細胞死の型はアポトーシスである．そのなかで重要な位置を占めるミトコンドリアにおける反応および抗アポトーシス因子について概要を紹介する．

Photopolymerization in 3D Printing

Abstract: The field of 3D printing is continuing its rapid development in both academic and industrial research environments. The development of 3D printing technologies has opened new implementations in rapid prototyping, tooling, dentistry, microfluidics, biomedical devices, tissue engineering, drug delivery, etc. Among different 3D printing techniques, photopolymerization-based process (such as stereolithography and digital light processing) offers flexibility over the final properties of the 3D printed materials (such as optical, chemical, and mechanical properties) using versatile polymer chemistry. The strategy behind the 3D photopolymerization is based on using monomers/oligomers in liquid state (in the presence of photoinitiators) that can be photopolymerized (via radical or cationic mechanism) upon exposure to light source of different wavelengths (depending on the photoinitiator system). An overview of recent evolutions in the field of photopolymerization-based 3D printing and highlights of novel 3D print...

3D printing of hydrogels: Rational design strategies and emerging biomedical applications

Abstract: 3D printing alias additive manufacturing can transform 3D virtual models created by computer-aided design (CAD) into physical 3D objects in a layer-by-layer manner dispensing with conventional molding or machining. Since the incipiency, significant advancements have been achieved in understanding the process of 3D printing and the relationship of component, structure, property and application of the created objects. Because hydrogels are one of the most feasible classes of ink materials for 3D printing and this field has been rapidly advancing, this Review focuses on hydrogel designs and development of advanced hydrogel-based biomaterial inks and bioinks for 3D printing. It covers 3D printing techniques including laser printing (stereolithography, two-photon polymerization), extrusion printing (3D plotting, direct ink writing), inkjet printing, 3D bioprinting, 4D printing and 4D bioprinting. It provides a comprehensive overview and discussion of the tailorability of material, mechanical, physical, chemical and biological properties of hydrogels to enable advanced hydrogel designs for 3D printing. The range of hydrogel-forming polymers covered encompasses biopolymers, synthetic polymers, polymer blends, nanocomposites, functional polymers, and cell-laden systems. The representative biomedical applications selected demonstrate how hydrogel-based 3D printing is being exploited in tissue engineering, regenerative medicine, cancer research, in vitro disease modeling, high-throughput drug screening, surgical preparation, soft robotics and flexible wearable electronics. Incomparable by thermoplastics, thermosets, ceramics and metals, hydrogel-based 3D printing is playing a pivotal role in the design and creation of advanced functional (bio)systems in a customizable way. An outlook on future directions of hydrogel-based 3D printing is presented.