scispace - formally typeset
Search or ask a question
Author

Sawitree Tipnee

Bio: Sawitree Tipnee is an academic researcher from Maejo University. The author has contributed to research in topics: Biofuel & Fermentation. The author has an hindex of 2, co-authored 3 publications receiving 35 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: Results revealed that it is feasible to produce biodiesel from wet microalgae biomass directly without the steps of drying and lipid extraction.
Abstract: Renewable fuels for alternative energy sources have been paid a great attention in recent years. Biodiesel has been gaining worldwide popularity as an alternative energy source. The production of biofuels from microalgae, especially biodiesel, has gained huge popularity in the recent years, and it is assumed that, due to its eco-friendly and renewable nature, it can replace the need of fossil fuels. Scenedesmus genus was discussed by phycologists as promising microalgae for biofuel production based on its biomass and fatty acid productivity. In the present study, S. acuminatus was cultivated in piggery wastewater effluent to couple waste treatment with biodiesel production. The batch feeding operation by replacing 10% of algae culture with Piggery wastewater effluent every day could provide a stable net biomass productivity of 3.24 g L−1 day−1. The effect of acid hydrolysis of lipids from S. acuminatus on FAME (fatty acid methyl esters) production was investigated. Direct transesterification (a one-stage process) of the as harvested S. acuminatus biomass resulted in a higher bio-diesel yield content than that in a two-stage process. This study results revealed that it is feasible to produce biodiesel from wet microalgae biomass directly without the steps of drying and lipid extraction.

28 citations

Journal ArticleDOI
01 Nov 2020-Fuel
TL;DR: In this paper, the effect of Trichoderma harzianum in sonicated pineapple fruit peel was evaluated, and the results revealed that the optimum condition for pineapple peel for higher production of fermentable sugar was under 30min sonication time hydrolyzed with T HARZianum with 5676-±-584g/L of RS after 48h of fermentation, the bioethanol yield was recorded as 1976−±-99 ǫ g/L (250% v/v) with energy productivity of 1269 MJ/hr.

20 citations

Journal ArticleDOI
TL;DR: In this article , NiO nanoparticles (NPs) were used as a biocatalyst to achieve maximum ethanol output, and the pretreatment of 2% NaOH with NiO NPs, 15-min autoclave condition, showed the highest total and reducing sugar yield.
Abstract: Bioethanol is a viable alternative to petroleum-derived fossil fuels. It is renewable, low-cost, and the preferred fuel for most developing countries worldwide. Although it is possible to make bioethanol from corn stalks and leaves wastes, second-generation biofuels made from agricultural waste feedstocks represent a significant step forward. In the present research, nickel oxide (NiO) nanoparticles (NPs) were used as a biocatalyst to achieve maximum ethanol output. The pretreatment of 2% NaOH with NiO NPs, 15-min autoclave condition, showed the highest total and reducing sugar yield was 162.69 g/L and 43.75 g/L. After hydrolysis, the suitable total and reducing sugar yield of 185.43 g/L and 125.42 g/L was chosen for further fermentation with the expansion of Saccharomyces cerevisiae cells. Separate hydrolysis and fermentation (SHF) using corn stalk and leaf waste was significantly assisted by incorporating a nanocatalyst; ethanol concentration was increased to 15.8 g/L at 24 hours incubation period. The study revealed critical information regarding ways NiO NPs could be employed to improve the efficiency of the ethanol production bioprocess.

Cited by
More filters
Journal ArticleDOI
TL;DR: In this article, a single cylinder diesel engine is employed as the test engine in the present work, and exhaust emissions such as CO, CO2, NOx, HC, and smoke are measured and compared with diesel oil.

156 citations

Journal ArticleDOI
TL;DR: This review presents the different value-added products obtained from microalgal biomass and the applicability of these products commercially.
Abstract: Microalgae are likely to become a part of our everyday diet in the near future as they are considered to be rich in proteins, carbohydrates, and high density lipoproteins. They will play a pivotal role in the food cycle of many people around the globe. Use of microalgae in treating wastewater is also one of the disciplines which are luring researchers as this contributes to a sustainable way of exploiting resources while keeping the environment safe. In addition, microalgal biomass also has the potential to be used as a feedstock for producing biofuel, bio fertilizers, pharmaceuticals, nutraceuticals and other bio-based products. This review presents the different value-added products obtained from microalgal biomass and the applicability of these products commercially.

141 citations

Journal ArticleDOI
15 Aug 2020-Fuel
TL;DR: In this paper, a quadratic model was created to predict the biodiesel yield where the R2 value was found to be 0.97, which indicates the satisfactory accuracy of the model.

79 citations

Journal ArticleDOI
TL;DR: In this article, the authors focus on the conventional and emerging opportunities of fruit and vegetable waste to generate value-added products, such as nutraceuticals, packaging, flavoring agents, and waste induced nanoparticles.

51 citations

Journal ArticleDOI
TL;DR: In this article , the authors focus on the conventional and emerging opportunities of fruit and vegetable waste to generate value-added products, such as nutraceuticals, packaging, flavoring agents, and waste induced nanoparticles.

49 citations