scispace - formally typeset
Search or ask a question
Author

Sean E. Shaheen

Bio: Sean E. Shaheen is an academic researcher from University of Colorado Boulder. The author has contributed to research in topics: Organic solar cell & Polymer solar cell. The author has an hindex of 52, co-authored 142 publications receiving 14249 citations. Previous affiliations of Sean E. Shaheen include University of Denver & Energy Institute.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the power conversion efficiency of organic photovoltaic devices based on a conjugated polymer/methanofullerene blend is dramatically affected by molecular morphology.
Abstract: We show that the power conversion efficiency of organic photovoltaic devices based on a conjugated polymer/methanofullerene blend is dramatically affected by molecular morphology. By structuring the blend to be a more intimate mixture that contains less phase segregation of methanofullerenes, and simultaneously increasing the degree of interactions between conjugated polymer chains, we have fabricated a device with a power conversion efficiency of 2.5% under AM1.5 illumination. This is a nearly threefold enhancement over previously reported values for such a device, and it approaches what is needed for the practical use of these devices for harvesting energy from sunlight.

2,591 citations

Journal ArticleDOI
TL;DR: The insertion of thin interlayers of LiF under the negative metal electrode (Al and Au) of bulk heterojunction solar cells significantly enhances the fill factor and stabilizes high open circuit voltages.
Abstract: The insertion of thin interlayers of LiF under the negative metal electrode (Al and Au) of bulk heterojunction solar cells significantly enhances the fill factor and stabilizes high open circuit voltages. Compared to devices without the LiF interfacial layer, the white light efficiencies increase by over 20% up to ηeff∼3.3%. Substitution of the LiF by another insulating interlayer SiOx results in lower overall efficiencies. In the case of a LiF/Au electrode, substantial efficiency enhancement is observed compared to a pristine Au electrode and white light efficiencies up to ηeff∼2.3% are reported.

932 citations

Journal ArticleDOI
TL;DR: Inverted organic photovoltaic devices based on a blend of poly(3-hexylthiophene) and a fullerene have been developed by inserting a solution-processed ZnO interlayer between the indium tin oxide (ITO) electrode and the active layer using Ag as a hole-collecting back contact as discussed by the authors.
Abstract: Inverted organic photovoltaic devices based on a blend of poly(3-hexylthiophene) and a fullerene have been developed by inserting a solution-processed ZnO interlayer between the indium tin oxide (ITO) electrode and the active layer using Ag as a hole-collecting back contact. Efficient electron extraction through the ZnO and hole extraction through the Ag, with minimal loss in open-circuit potential, is observed with a certified power conversion efficiency of 2.58%. The inverted architecture removes the need for the use of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) as an ITO modifier and for the use of a low-work-function metal as the back contact in the device.

814 citations

Journal ArticleDOI
03 May 2019-Science
TL;DR: The addition of guanidinium thiocyanate (GuaSCN) resulted in marked improvements in the structural and optoelectronic properties of Sn-Pb mixed, low-band gap perovskite films, enabling the demonstration of >20% efficient low–band gap PSCs.
Abstract: All-perovskite-based polycrystalline thin-film tandem solar cells have the potential to deliver efficiencies of >30%. However, the performance of all-perovskite-based tandem devices has been limited by the lack of high-efficiency, low-band gap tin-lead (Sn-Pb) mixed-perovskite solar cells (PSCs). We found that the addition of guanidinium thiocyanate (GuaSCN) resulted in marked improvements in the structural and optoelectronic properties of Sn-Pb mixed, low-band gap (~1.25 electron volt) perovskite films. The films have defect densities that are lower by a factor of 10, leading to carrier lifetimes of greater than 1 microsecond and diffusion lengths of 2.5 micrometers. These improved properties enable our demonstration of >20% efficient low-band gap PSCs. When combined with wider-band gap PSCs, we achieve 25% efficient four-terminal and 23.1% efficient two-terminal all-perovskite-based polycrystalline thin-film tandem solar cells.

672 citations

Journal ArticleDOI
TL;DR: In this article, the authors describe the motivation for pursuing research in this field and provide an overview of the various technical approaches that have been developed to date, and discuss the challenges that need to be overcome in order for organic photovoltaics to realize their potential as an economically viable path to harvesting energy from sunlight.
Abstract: Harvesting energy directly from sunlight using photovoltaic technology is a way to address growing global energy needs with a renewable resource while minimizing detrimental effects on the environment by reducing atmospheric emissions. This issue of MRS Bulletin on “Organic-Based Photovoltaics” looks at a new generation of solar cells that have the potential to be produced inexpensively. Recent advances in solar power conversion efficiencies have propelled organic-based photovoltaics out of the realm of strictly fundamental research at the university level and into the industrial laboratory setting. Fabricated from organic materials—polymers and molecules—these devices are potentially easier to manufacture than current technologies based on silicon or other materials. In this introductory article, we describe the motivation for pursuing research in this field and provide an overview of the various technical approaches that have been developed to date. We conclude by discussing the challenges that need to be overcome in order for organic photovoltaics to realize their potential as an economically viable path to harvesting energy from sunlight.

564 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency as mentioned in this paper, and many DSC research groups have been established around the world.
Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

8,707 citations

Journal ArticleDOI
06 Jun 1986-JAMA
TL;DR: The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or her own research.
Abstract: I have developed "tennis elbow" from lugging this book around the past four weeks, but it is worth the pain, the effort, and the aspirin. It is also worth the (relatively speaking) bargain price. Including appendixes, this book contains 894 pages of text. The entire panorama of the neural sciences is surveyed and examined, and it is comprehensive in its scope, from genomes to social behaviors. The editors explicitly state that the book is designed as "an introductory text for students of biology, behavior, and medicine," but it is hard to imagine any audience, interested in any fragment of neuroscience at any level of sophistication, that would not enjoy this book. The editors have done a masterful job of weaving together the biologic, the behavioral, and the clinical sciences into a single tapestry in which everyone from the molecular biologist to the practicing psychiatrist can find and appreciate his or

7,563 citations

Journal ArticleDOI
TL;DR: Solar energy is by far the largest exploitable resource, providing more energy in 1 hour to the earth than all of the energy consumed by humans in an entire year, and if solar energy is to be a major primary energy source, it must be stored and dispatched on demand to the end user.
Abstract: Global energy consumption is projected to increase, even in the face of substantial declines in energy intensity, at least 2-fold by midcentury relative to the present because of population and economic growth. This demand could be met, in principle, from fossil energy resources, particularly coal. However, the cumulative nature of CO2 emissions in the atmosphere demands that holding atmospheric CO2 levels to even twice their preanthropogenic values by midcentury will require invention, development, and deployment of schemes for carbon-neutral energy production on a scale commensurate with, or larger than, the entire present-day energy supply from all sources combined. Among renewable energy resources, solar energy is by far the largest exploitable resource, providing more energy in 1 hour to the earth than all of the energy consumed by humans in an entire year. In view of the intermittency of insolation, if solar energy is to be a major primary energy source, it must be stored and dispatched on demand to the end user. An especially attractive approach is to store solar-converted energy in the form of chemical bonds, i.e., in a photosynthetic process at a year-round average efficiency significantly higher than current plants or algae, to reduce land-area requirements. Scientific challenges involved with this process include schemes to capture and convert solar energy and then store the energy in the form of chemical bonds, producing oxygen from water and a reduced fuel such as hydrogen, methane, methanol, or other hydrocarbon species.

7,076 citations

Journal ArticleDOI
TL;DR: This review gives a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells, and discusses the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells.
Abstract: The need to develop inexpensive renewable energy sources stimulates scientific research for efficient, low-cost photovoltaic devices.1 The organic, polymer-based photovoltaic elements have introduced at least the potential of obtaining cheap and easy methods to produce energy from light.2 The possibility of chemically manipulating the material properties of polymers (plastics) combined with a variety of easy and cheap processing techniques has made polymer-based materials present in almost every aspect of modern society.3 Organic semiconductors have several advantages: (a) lowcost synthesis, and (b) easy manufacture of thin film devices by vacuum evaporation/sublimation or solution cast or printing technologies. Furthermore, organic semiconductor thin films may show high absorption coefficients4 exceeding 105 cm-1, which makes them good chromophores for optoelectronic applications. The electronic band gap of organic semiconductors can be engineered by chemical synthesis for simple color changing of light emitting diodes (LEDs).5 Charge carrier mobilities as high as 10 cm2/V‚s6 made them competitive with amorphous silicon.7 This review is organized as follows. In the first part, we will give a general introduction to the materials, production techniques, working principles, critical parameters, and stability of the organic solar cells. In the second part, we will focus on conjugated polymer/fullerene bulk heterojunction solar cells, mainly on polyphenylenevinylene (PPV) derivatives/(1-(3-methoxycarbonyl) propyl-1-phenyl[6,6]C61) (PCBM) fullerene derivatives and poly(3-hexylthiophene) (P3HT)/PCBM systems. In the third part, we will discuss the alternative approaches such as polymer/polymer solar cells and organic/inorganic hybrid solar cells. In the fourth part, we will suggest possible routes for further improvements and finish with some conclusions. The different papers mentioned in the text have been chosen for didactical purposes and cannot reflect the chronology of the research field nor have a claim of completeness. The further interested reader is referred to the vast amount of quality papers published in this field during the past decade.

6,059 citations

Journal ArticleDOI
TL;DR: In this article, the authors report highly efficient polymer solar cells based on a bulk heterojunction of polymer poly(3-hexylthiophene) and methanofullerene.
Abstract: Converting solar energy into electricity provides a much-needed solution to the energy crisis the world is facing today. Polymer solar cells have shown potential to harness solar energy in a cost-effective way. Significant efforts are underway to improve their efficiency to the level of practical applications. Here, we report highly efficient polymer solar cells based on a bulk heterojunction of polymer poly(3-hexylthiophene) and methanofullerene. Controlling the active layer growth rate results in an increased hole mobility and balanced charge transport. Together with increased absorption in the active layer, this results in much-improved device performance, particularly in external quantum efficiency. The power-conversion efficiency of 4.4% achieved here is the highest published so far for polymer-based solar cells. The solution process involved ensures that the fabrication cost remains low and the processing is simple. The high efficiency achieved in this work brings these devices one step closer to commercialization.

5,431 citations