scispace - formally typeset
Search or ask a question
Author

Sera Shin

Bio: Sera Shin is an academic researcher from Yonsei University. The author has contributed to research in topics: Nanoparticle & Stretchable electronics. The author has an hindex of 13, co-authored 20 publications receiving 1848 citations.

Papers
More filters
Journal ArticleDOI
TL;DR: A flexible and sensitive textile-based pressure sensor is developed using highly conductive fibers coated with dielectric rubber materials that exhibits superior sensitivity, very fast response time, and high stability when applied to make smart gloves and clothes that can control machines wirelessly as human-machine interfaces.
Abstract: A flexible and sensitive textile-based pressure sensor is developed using highly conductive fibers coated with dielectric rubber materials. The pressure sensor exhibits superior sensitivity, very fast response time, and high stability, compared with previous textile-based pressure sensors. By using a weaving method, the pressure sensor can be applied to make smart gloves and clothes that can control machines wirelessly as human-machine interfaces.

884 citations

Journal ArticleDOI
TL;DR: In this article, an AgNW-embedded styrene-butadiene-styrene (SBS) elastomeric matrix is fabricated by a simple wet spinning method.
Abstract: Stretchable conductive fi bers have received signifi cant attention due to their possibility of being utilized in wearable and foldable electronics. Here, highly stretchable conductive fi ber composed of silver nanowires (AgNWs) and silver nanoparticles (AgNPs) embedded in a styrene‐butadiene‐styrene (SBS) elastomeric matrix is fabricated. An AgNW-embedded SBS fi ber is fabricated by a simple wet spinning method. Then, the AgNPs are formed on both the surface and inner region of the AgNW-embedded fi ber via repeated cycles of silver precursor absorption and reduction processes. The AgNW-embedded conductive fi ber exhibits superior initial electrical conductivity ( σ 0 = 2450 S cm −1 ) and elongation at break (900% strain) due to the high weight percentage of the conductive fi llers and the use of a highly stretchable SBS elastomer matrix. During the stretching, the embedded AgNWs act as conducting bridges between AgNPs, resulting in the preservation of electrical conductivity under high strain (the rate of conductivity degradation, σ / σ 0 = 4.4% at 100% strain). The AgNW-embedded conductive fi bers show the strain-sensing behavior with a broad range of applied tensile strain. The AgNW reinforced highly stretchable conductive fi bers can be embedded into a smart glove for detecting sign language by integrating fi ve composite fi bers in the glove, which can successfully perceive human motions.

472 citations

Journal ArticleDOI
05 Oct 2016-ACS Nano
TL;DR: This work demonstrates the improvement of gas-sensing performance of large-area tungsten disulfide (WS2) nanosheets through surface functionalization using Ag nanowires (NWs) to improve 2D TMDC gas sensors.
Abstract: Semiconducting two-dimensional (2D) transition metal dichalcogenides (TMDCs) are promising gas-sensing materials due to their large surface-to-volume ratio. However, their poor gas-sensing performance resulting from the low response, incomplete recovery, and insufficient selectivity hinders the realization of high-performance 2D TMDC gas sensors. Here, we demonstrate the improvement of gas-sensing performance of large-area tungsten disulfide (WS2) nanosheets through surface functionalization using Ag nanowires (NWs). Large-area WS2 nanosheets were synthesized through atomic layer deposition of WO3 followed by sulfurization. The pristine WS2 gas sensors exhibited a significant response to acetone and NO2 but an incomplete recovery in the case of NO2 sensing. After AgNW functionalization, the WS2 gas sensor showed dramatically improved response (667%) and recovery upon NO2 exposure. Our results establish that the proposed method is a promising strategy to improve 2D TMDC gas sensors.

315 citations

Journal ArticleDOI
04 Apr 2018-ACS Nano
TL;DR: This work presents a facile approach for fabricating highly stretchable and sensitive fiber strain sensors by embedding Ag nanoparticles into a stretchable fiber with a multifilament structure to demonstrate the potential of the Fiber strain sensors as candidates for electronic textiles, wearable electronics, and biomedical engineering.
Abstract: Highly stretchable fiber strain sensors are one of the most important components for various applications in wearable electronics, electronic textiles, and biomedical electronics. Herein, we present a facile approach for fabricating highly stretchable and sensitive fiber strain sensors by embedding Ag nanoparticles into a stretchable fiber with a multifilament structure. The multifilament structure and Ag-rich shells of the fiber strain sensor enable the sensor to simultaneously achieve both a high sensitivity and largely wide sensing range despite its simple fabrication process and components. The fiber strain sensor simultaneously exhibits ultrahigh gauge factors (∼9.3 × 105 and ∼659 in the first stretching and subsequent stretching, respectively), a very broad strain-sensing range (450 and 200% for the first and subsequent stretching, respectively), and high durability for more than 10 000 stretching cycles. The fiber strain sensors can also be readily integrated into a glove to control a hand robot an...

185 citations

Journal ArticleDOI
Sera Shin1, Jungmok Seo1, Heetak Han1, Subin Kang1, Hyun-Chul Kim1, Taeyoon Lee1 
TL;DR: The engineering of surface wettability by manipulating chemical properties and structure opens emerging biomedical applications ranging from high-throughput cell culture platforms to biomedical devices.
Abstract: Biological creatures with unique surface wettability have long served as a source of inspiration for scientists and engineers. More specifically, materials exhibiting extreme wetting properties, such as superhydrophilic and superhydrophobic surfaces, have attracted considerable attention because of their potential use in various applications, such as self-cleaning fabrics, anti-fog windows, anti-corrosive coatings, drag-reduction systems, and efficient water transportation. In particular, the engineering of surface wettability by manipulating chemical properties and structure opens emerging biomedical applications ranging from high-throughput cell culture platforms to biomedical devices. This review describes design and fabrication methods for artificial extreme wetting surfaces. Next, we introduce some of the newer and emerging biomedical applications using extreme wetting surfaces. Current challenges and future prospects of the surfaces for potential biomedical applications are also addressed.

109 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: The latest successful examples of flexible and stretchable physical sensors for the detection of temperature, pressure, and strain, as well as their novel structures, technological innovations, and challenges, are reviewed.
Abstract: Flexible and stretchable physical sensors that can measure and quantify electrical signals generated by human activities are attracting a great deal of attention as they have unique characteristics, such as ultrathinness, low modulus, light weight, high flexibility, and stretchability. These flexible and stretchable physical sensors conformally attached on the surface of organs or skin can provide a new opportunity for human-activity monitoring and personal healthcare. Consequently, in recent years there has been considerable research effort devoted to the development of flexible and stretchable physical sensors to fulfill the requirements of future technology, and much progress has been achieved. Here, the most recent developments of flexible and stretchable physical sensors are described, including temperature, pressure, and strain sensors, and flexible and stretchable sensor-integrated platforms. The latest successful examples of flexible and stretchable physical sensors for the detection of temperature, pressure, and strain, as well as their novel structures, technological innovations, and challenges, are reviewed first. In the next section, recent progress regarding sensor-integrated wearable platforms is overviewed in detail. Some of the latest achievements regarding self-powered sensor-integrated wearable platform technologies are also reviewed. Further research direction and challenges are also proposed to develop a fully sensor-integrated wearable platform for monitoring human activity and personal healthcare in the near future.

1,469 citations

Journal ArticleDOI
TL;DR: Recent progress in electronic skin or e‐skin research is broadly reviewed, focusing on technologies needed in three main applications: skin‐attachable electronics, robotics, and prosthetics.
Abstract: Recent progress in electronic skin or e-skin research is broadly reviewed, focusing on technologies needed in three main applications: skin-attachable electronics, robotics, and prosthetics. First, since e-skin will be exposed to prolonged stresses of various kinds and needs to be conformally adhered to irregularly shaped surfaces, materials with intrinsic stretchability and self-healing properties are of great importance. Second, tactile sensing capability such as the detection of pressure, strain, slip, force vector, and temperature are important for health monitoring in skin attachable devices, and to enable object manipulation and detection of surrounding environment for robotics and prosthetics. For skin attachable devices, chemical and electrophysiological sensing and wireless signal communication are of high significance to fully gauge the state of health of users and to ensure user comfort. For robotics and prosthetics, large-area integration on 3D surfaces in a facile and scalable manner is critical. Furthermore, new signal processing strategies using neuromorphic devices are needed to efficiently process tactile information in a parallel and low power manner. For prosthetics, neural interfacing electrodes are of high importance. These topics are discussed, focusing on progress, current challenges, and future prospects.

881 citations

Journal ArticleDOI
Chunya Wang1, Kailun Xia1, Huimin Wang1, Xiaoping Liang1, Zhe Yin1, Yingying Zhang1 
TL;DR: The latest advances in the rational design and controlled fabrication of carbon materials toward applications in flexible and wearable electronics are reviewed and various carbon materials with controlled micro/nanostructures and designed macroscopic morphologies for high-performance flexible electronics are introduced.
Abstract: Flexible and wearable electronics are attracting wide attention due to their potential applications in wearable human health monitoring and care systems. Carbon materials have combined superiorities such as good electrical conductivity, intrinsic and structural flexibility, light weight, high chemical and thermal stability, ease of chemical functionalization, as well as potential mass production, enabling them to be promising candidate materials for flexible and wearable electronics. Consequently, great efforts are devoted to the controlled fabrication of carbon materials with rationally designed structures for applications in next-generation electronics. Herein, the latest advances in the rational design and controlled fabrication of carbon materials toward applications in flexible and wearable electronics are reviewed. Various carbon materials (carbon nanotubes, graphene, natural-biomaterial-derived carbon, etc.) with controlled micro/nanostructures and designed macroscopic morphologies for high-performance flexible electronics are introduced. The fabrication strategies, working mechanism, performance, and applications of carbon-based flexible devices are reviewed and discussed, including strain/pressure sensors, temperature/humidity sensors, electrochemical sensors, flexible conductive electrodes/wires, and flexible power devices. Furthermore, the integration of multiple devices toward multifunctional wearable systems is briefly reviewed. Finally, the existing challenges and future opportunities in this field are summarized.

751 citations

Journal ArticleDOI
TL;DR: This article reviews and highlights recent advances in wearable and flexible sensors toward continuous and non-invasive molecular analysis in sweat, tears, saliva, interstitial fluid, blood, wound exudate as well as exhaled breath.
Abstract: Wearable biosensors have received tremendous attention over the past decade owing to their great potential in predictive analytics and treatment toward personalized medicine. Flexible electronics could serve as an ideal platform for personalized wearable devices because of their unique properties such as light weight, low cost, high flexibility and great conformability. Unlike most reported flexible sensors that mainly track physical activities and vital signs, the new generation of wearable and flexible chemical sensors enables real-time, continuous and fast detection of accessible biomarkers from the human body, and allows for the collection of large-scale information about the individual's dynamic health status at the molecular level. In this article, we review and highlight recent advances in wearable and flexible sensors toward continuous and non-invasive molecular analysis in sweat, tears, saliva, interstitial fluid, blood, wound exudate as well as exhaled breath. The flexible platforms, sensing mechanisms, and device and system configurations employed for continuous monitoring are summarized. We also discuss the key challenges and opportunities of the wearable and flexible chemical sensors that lie ahead.

743 citations

Journal ArticleDOI
TL;DR: In this paper, an adhesive and conductive hydrogel is developed with long-lasting moisture lock-in capability and extreme temperature tolerance, which is formed in a binary-solvent system composed of water and glycerol.
Abstract: Conductive hydrogels are a promising class of materials to design bioelectronics for new technological interfaces with human body, which are required to work for a long-term or under extreme environment. Traditional hydrogels are limited in short-term usage under room temperature, as it is difficult to retain water under cold or hot environment. Inspired by the antifreezing/antiheating behaviors from nature, and based on mussel chemistry, an adhesive and conductive hydrogel is developed with long-lasting moisture lock-in capability and extreme temperature tolerance, which is formed in a binary-solvent system composed of water and glycerol. Polydopamine (PDA)-decorated carbon nanotubes (CNTs) are incorporated into the hydrogel, which assign conductivity to the hydrogel and serve as nanoreinforcements to enhance the mechanical properties of the hydrogel. The catechol groups on PDA and viscous glycerol endow the hydrogel with high tissue adhesiveness. Particularly, the hydrogel is thermal tolerant to maintain all the properties under extreme wide tempreature spectrum (−20 or 60 °C) or stored for a long term. In summary, this mussel-inspired hydrogel is a promising material for self-adhesive bioelectronics to detect biosignals in cold or hot environments, and also as a dressing to protect skin from injuries related to frostbites or burns.

695 citations