Seth A. Coe

Bio: Seth A. Coe is an academic researcher from Massachusetts Institute of Technology. The author has contributed to research in topics: Semiconductor & Molecular electronics. The author has an hindex of 4, co-authored 8 publications receiving 2647 citations.

Electroluminescence from single monolayers of nanocrystals in molecular organic devices

Abstract: The integration of organic and inorganic materials at the nanometre scale into hybrid optoelectronic structures enables active devices that combine the diversity of organic materials with the high-performance electronic and optical properties of inorganic nanocrystals. The optimization of such hybrid devices ultimately depends upon the precise positioning of the functionally distinct materials. Previous studies have already emphasized that this is a challenge, owing to the lack of well-developed nanometre-scale fabrication techniques. Here we demonstrate a hybrid light-emitting diode (LED) that combines the ease of processability of organic materials with the narrow-band, efficient luminescence of colloidal quantum dots (QDs). To isolate the luminescence processes from charge conduction, we fabricate a quantum-dot LED (QD-LED) that contains only a single monolayer of QDs, sandwiched between two organic thin films. This is achieved by a method that uses material phase segregation between the QD aliphatic capping groups and the aromatic organic materials. In our devices, where QDs function exclusively as lumophores, we observe a 25-fold improvement in luminescence efficiency (1.6 cd A(-1) at 2,000 cd m(-2)) over the best previous QD-LED results. The reproducibility and precision of our phase-segregation approach suggests that this technique could be widely applicable to the fabrication of other hybrid organic/inorganic devices.

Light emitting device including semiconductor nanocrystals

Abstract: A light emitting device includes a semiconductor nanocrystal and a charge transporting layer that includes an inorganic material. The charge transporting layer can be a hole or electron transporting layer. The inorganic material can be an inorganic semiconductor.

Polymer-on-Polymer Stamping on Micro- and Nano-Scales

Abstract: The goal of the project was to determine whether PDAC (poly (diallyldimethylammonium chloride), also abbreviated PDADMAC) could be printed reproducibly to create patterns with a sub-micron resolution. PDAC was stamped onto bare silicon using PDMS stamps having features only about 150 nm wide. A variety of aqueous PDAC inks were tried, to study the effect of concentration and ionic strength on the pattern produced. In order to get good prints, new stamping techniques were also required. A rigid stamping apparatus was built to ensure steady placement, and the stamps were spin coated with a different ink solution to produce thin, even coats of ink. [1] Using these methods, the pattern transferred.

Prospects of Colloidal Nanocrystals for Electronic and Optoelectronic Applications

Abstract: Nanocrystals (NCs) discussed in this Review are tiny crystals of metals, semiconductors, and magnetic material consisting of hundreds to a few thousand atoms each. Their size ranges from 2-3 to about 20 nm. What is special about this size regime that placed NCs among the hottest research topics of the last decades? The quantum mechanical coupling * To whom correspondence should be addressed. E-mail: dvtalapin@uchicago.edu. † The University of Chicago. ‡ Argonne National Lab. Chem. Rev. 2010, 110, 389–458 389

Science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems

Abstract: We present the science and technology roadmap for graphene, related two-dimensional crystals, and hybrid systems, targeting an evolution in technology, that might lead to impacts and benefits reaching into most areas of society. This roadmap was developed within the framework of the European Graphene Flagship and outlines the main targets and research areas as best understood at the start of this ambitious project. We provide an overview of the key aspects of graphene and related materials (GRMs), ranging from fundamental research challenges to a variety of applications in a large number of sectors, highlighting the steps necessary to take GRMs from a state of raw potential to a point where they might revolutionize multiple industries. We also define an extensive list of acronyms in an effort to standardize the nomenclature in this emerging field.

Emergence of colloidal quantum-dot light-emitting technologies

Abstract: This Review article summarizes the key advantages of using quantum dots (QDs) as luminophores in light-emitting devices (LEDs) and outlines the operating mechanisms of four types of QD-LED. The key scientific and technological challenges facing QD-LED commercialization are identified, together with on-going strategies to overcome these challenges.

Solution-processed, high-performance light-emitting diodes based on quantum dots

Abstract: Solution-processed optoelectronic and electronic devices are attractive owing to the potential for low-cost fabrication of large-area devices and the compatibility with lightweight, flexible plastic substrates. Solution-processed light-emitting diodes (LEDs) using conjugated polymers or quantum dots as emitters have attracted great interest over the past two decades. However, the overall performance of solution-processed LEDs--including their efficiency, efficiency roll-off at high current densities, turn-on voltage and lifetime under operational conditions-remains inferior to that of the best vacuum-deposited organic LEDs. Here we report a solution-processed, multilayer quantum-dot-based LED with excellent performance and reproducibility. It exhibits colour-saturated deep-red emission, sub-bandgap turn-on at 1.7 volts, high external quantum efficiencies of up to 20.5 per cent, low efficiency roll-off (up to 15.1 per cent of the external quantum efficiency at 100 mA cm(-2)), and a long operational lifetime of more than 100,000 hours at 100 cd m(-2), making this device the best-performing solution-processed red LED so far, comparable to state-of-the-art vacuum-deposited organic LEDs. This optoelectronic performance is achieved by inserting an insulating layer between the quantum dot layer and the oxide electron-transport layer to optimize charge balance in the device and preserve the superior emissive properties of the quantum dots. We anticipate that our results will be a starting point for further research, leading to high-performance, all-solution-processed quantum-dot-based LEDs ideal for next-generation display and solid-state lighting technologies.

Electrogenerated Chemiluminescence and Its Biorelated Applications

Abstract: Electrogenerated chemiluminescence (also called electrochemiluminescence and abbreviated ECL) is the process whereby species generated at electrodes undergo high-energy electron-transfer reactions to form excited states that emit light. The first detailed ECL studies were described by Hercules and Bard et al. in the mid-1960s, although reports concerning light emission during electrolysis date back to the 1920s by Harvey. After about 40 years study, ECL has now become a very powerful analytical technique and been widely used in the areas of, for example, immunoassay, food and water testing, and biowarfare agent detection. ECL has also been successfully exploited as a detector of flow injection analysis (FIA), high-performance liquid chromatography (HPLC), capillary electrophoresis, and micro total analysis (μTAS). Figure 1 illustrates a time line of various events in the development of ECL. A literature survey using SciFinder Scholar reveals that more than 2000 journal articles, book chapters, and patents on various topics of ECL have been published. The overall number of publications, as shown in Figure 2, has increased exponentially over the past 20 years, of which 40–50% were biorelated. Similar amounts of ECL papers could be also found from the Thomson ISI Web of Science as well as † Telephone (601) 266 4716; fax (601) 266 6075; e-mail wujian.miao@ usm.edu. Wujian Miao received his undergraduate diploma in chemistry from Nantong University (Nantong, China) in 1982, his M.Sc. degree in analytical chemistry from Zhongshan University (Guangzhou, China, with Jinyuan Mo) in 1991, and his Ph.D. degree in electrochemistry from Monash University (Melbourne, Australia, with Alan M. Bond) in 2000. He then served as a Research Scientist in CSIRO (Melbourne, Australia), followed by a postdoctoral fellowship at the University of Texas at Austin with Allen J. Bard in 2001. Since 2004 he has served as an assistant professor of chemistry at the University of Southern Mississippi.