scispace - formally typeset
Search or ask a question
Author

Sethuraman Sankararaman

Bio: Sethuraman Sankararaman is an academic researcher from Indian Institute of Technology Madras. The author has contributed to research in topics: Lithium perchlorate & Diethyl ether. The author has an hindex of 20, co-authored 71 publications receiving 1437 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, a mesoionic N-heterocyclic carbene (NHC) consisting of 1,4-diphenyl-3-methyl-1,2,3-triazol-5-ylidene (Tz) was used as a catalyst for the stereoselective hydroarylation of alkynes.

136 citations

Journal ArticleDOI
TL;DR: In this article, the effect of extended acetylenic conjugation on the absorption and fluorescence properties of 1,3,6,8-tetraethynylpyrene derivatives was studied.

104 citations

Journal ArticleDOI
TL;DR: Chiral and achiral pincer type palladium complexes bearing abnormal N-heterocyclic carbene ligands derived from 1,2,3-triazole are reported in this article.

101 citations

Journal ArticleDOI
TL;DR: Based on the spectroscopic evidence, conformations and dynamics of 1, arising from the hindered rotation of the major axis, are proposed.
Abstract: Synthesis of a tetrakis(1-pyrenylethynyl)-substituted rigid hinge-like molecule (1) is described. The intramolecular π-stacking interaction of the pyrene units is studied by 1H NMR and fluorescence spectroscopy. Due to intramolecular π-stacking interactions, chemical shifts of the pyrene protons in 1 are highly shielded in the NMR spectrum. Fluorescence from the static excimer state is observed due to π-stacking interactions among the pyrene units in the ground state of 1. Based on the spectroscopic evidence, conformations and dynamics of 1, arising from the hindered rotation of the major axis, are proposed.

89 citations

Journal ArticleDOI
TL;DR: In this article, aldehydes and acetals were converted to acyclic and cyclic dithioacetals in 5 M lithium perchlorate/diethyl ether (LPDE) medium at ambient temperature in high yields.
Abstract: Aldehydes and acetals were very efficiently converted to acyclic and cyclic dithioacetals in 5 M lithium perchlorate/diethyl ether (LPDE) medium at ambient temperature in high yields. Spectroscopic and other experimental evidences strongly suggest the formation of oxocarbenium ion intermediates from acetals in 5 M LPDE which subsequently reacted with thiols to give the dithioacetals. Under the same conditions keto- nes and their acetals also reacted, albeit very slowly compared to al- dehydes and acetals, to yield dithioacetals. The difference in their reactivity was successfully employed in the chemoselective dithioace- talization of aldehydes and acetals in the presence of ketones and their acetals

77 citations


Cited by
More filters
01 Jan 2016
TL;DR: The principles of fluorescence spectroscopy is universally compatible with any devices to read and is available in the digital library an online access to it is set as public so you can download it instantly.
Abstract: Thank you very much for downloading principles of fluorescence spectroscopy. As you may know, people have look hundreds times for their favorite novels like this principles of fluorescence spectroscopy, but end up in malicious downloads. Rather than reading a good book with a cup of tea in the afternoon, instead they cope with some harmful bugs inside their desktop computer. principles of fluorescence spectroscopy is available in our digital library an online access to it is set as public so you can download it instantly. Our digital library spans in multiple locations, allowing you to get the most less latency time to download any of our books like this one. Kindly say, the principles of fluorescence spectroscopy is universally compatible with any devices to read.

2,960 citations

Journal ArticleDOI
TL;DR: Transition-Metal-Free Reactions, Alkynylation of Heterocycles, and Synthesis of Electronic and Electrooptical Molecules: A Review.
Abstract: 3.7. Palladium Nanoparticles as Catalysts 888 3.8. Other Transition-Metal Complexes 888 3.9. Transition-Metal-Free Reactions 889 4. Applications 889 4.1. Alkynylation of Arenes 889 4.2. Alkynylation of Heterocycles 891 4.3. Synthesis of Enynes and Enediynes 894 4.4. Synthesis of Ynones 896 4.5. Synthesis of Carbocyclic Systems 897 4.6. Synthesis of Heterocyclic Systems 898 4.7. Synthesis of Natural Products 903 4.8. Synthesis of Electronic and Electrooptical Molecules 906

2,522 citations

Journal ArticleDOI
TL;DR: This review article summarizes some molecular design rationales for triplet PSs, based on the molecular structural factors that facilitate ISC, and the design of transition metal complexes with large molar absorption coefficients in the visible spectral region and long-lived triplet excited states is presented.
Abstract: Triplet photosensitizers (PSs) are compounds that can be efficiently excited to the triplet excited state which subsequently act as catalysts in photochemical reactions. The name is originally derived from compounds that were used to transfer the triplet energy to other compounds that have only a small intrinsic triplet state yield. Triplet PSs are not only used for triplet energy transfer, but also for photocatalytic organic reactions, photodynamic therapy (PDT), photoinduced hydrogen production from water and triplet-triplet annihilation (TTA) upconversion. A good PS should exhibit strong absorption of the excitation light, a high yield of intersystem crossing (ISC) for efficient production of the triplet state, and a long triplet lifetime to allow for the reaction with a reactant molecule. Most transition metal complexes show efficient ISC, but small molar absorption coefficients in the visible spectral region and short-lived triplet excited states, which make them unsuitable as triplet PSs. One obstacle to the development of new triplet PSs is the difficulty in predicting the ISC of chromophores, especially of organic compounds without any heavy atoms. This review article summarizes some molecular design rationales for triplet PSs, based on the molecular structural factors that facilitate ISC. The design of transition metal complexes with large molar absorption coefficients in the visible spectral region and long-lived triplet excited states is presented. A new method of using a spin converter to construct heavy atom-free organic triplet PSs is discussed, with which ISC becomes predictable, C60 being an example. To enhance the performance of triplet PSs, energy funneling based triplet PSs are proposed, which show broadband absorption in the visible region. Applications of triplet PSs in photocatalytic organic reactions, hydrogen production, triplet-triplet annihilation upconversion and luminescent oxygen sensing are briefly introduced.

1,104 citations

Journal ArticleDOI
TL;DR: Photochemical Electron-Transfer Reactions with a Catalytic Sensitizer 1068 6.1.1 Photochemical Extrusion of Small Molecules 1067 6.2.2 Photochemical Rearrangings 1061 4.4.3.
Abstract: 2.3. [4 + 4] Cycloadditions 1058 2.4. Photocycloadditions of Aromatic Compounds 1058 2.4.1. Benzene Derivatives 1058 2.4.2. Condensed Aromatic Compounds 1060 3. Photochemical Rearrangements 1061 4. Cyclizations 1064 4.1. Pericyclizations 1064 4.2. Norrish−Yang Reaction 1066 5. Photochemical Extrusion of Small Molecules 1067 6. Photochemical Electron Transfer 1068 6.1. Photochemical Electron-Transfer Reactions with a Catalytic Sensitizer 1068

1,046 citations

01 Jan 2007
Abstract: Fogging occurs when moisture condensation takes the form of accumulated droplets with diameters larger than 190 nm or half of the shortest wavelength (380 nm) of visible light. This problem may be effectively addressed by changing the affinity of a material’s surface for water, which can be accomplished via two approaches: i) the superhydrophilic approach, with a water contact angle (CA) less than 5°, and ii) the superhydrophobic approach, with a water CA greater than 150°, and extremely low CA hysteresis. To date, all techniques reported belong to the former category, as they are intended for applications in optical transparent coatings. A well-known example is the use of photocatalytic TiO2 nanoparticle coatings that become superhydrophilic under UV irradiation. Very recently, a capillary effect was skillfully adopted to achieve superhydrophilic properties by constructing 3D nanoporous structures from layer-by-layer assembled nanoparticles. The key to these two “wet”-style antifogging strategies is for micrometer-sized fog drops to rapidly spread into a uniform thin film, which can prevent light scattering and reflection from nucleated droplets. Optical transparency is not an intrinsic property of antifogging coatings even though recently developed antifogging coatings are almost transparent, and the transparency could be achieved by further tuning the nanoparticle size and film thickness. To our knowledge, the antifogging coatings may also be applied to many fields that do not require optical transparency, including, for example, paints for inhibiting swelling and peeling issues and metal surfaces for preventing corrosion. These types of issues, which are caused by adsorption of moisture, are hard to solve by the superhydrophilic approach because of its inherently “wet” nature. Thus, a “dry”-style antifogging strategy, which consists of a novel superhydrophobic technique that can prevent moisture or microscale fog drops from nucleating on a surface, is desired. Recent bionic researches have revealed that the self-cleaning ability of lotus leaves and the striking ability of a water-strider’s legs to walk on water can be attributed to the ideal superhydrophobicity of their surfaces, induced by special microand nanostructures. To date, the biomimetic fabrication of superhydrophobic microand/or nanostructures has attracted considerable interest, and these types of materials can be used for such applications as self-cleaning coatings and stain-resistant textiles. Although a superhydrophobic technique inspired by lotus leaves is expected to be able to solve such fogging problems because the water droplets can not remain on the surface, there are no reports of such antifogging coatings. Very recently, researchers from General Motors have reported that the surfaces of lotus leaves become wet with moisture because the size of the fog drops are at the microscale—so small that they can be easily trapped in the interspaces among micropapillae. Thus, lotuslike surface microstructures are unsuitable for superhydrophobic antifogging coatings, and a new inspiration from nature is desired for solving this problem. In this communication, we report a novel, biological, superhydrophobic antifogging strategy. It was found that the compound eyes of the mosquito C. pipiens possess ideal superhydrophobic properties that provide an effective protective mechanism for maintaining clear vision in a humid habitat. Our research indicates that this unique property is attributed to the smart design of elaborate microand nanostructures: hexagonally non-close-packed (ncp) nipples at the nanoscale prevent microscale fog drops from condensing on the ommatidia surface, and hexagonally close-packed (hcp) ommatidia at the microscale could efficiently prevent fog drops from being trapped in the voids between the ommatidia. We also fabricated artificial compound eyes by using soft lithography and investigated the effects of microand nanostructures on the surface hydrophobicity. These findings could be used to develop novel superhydrophobic antifogging coatings in the near future. It is known that mosquitoes possess excellent vision, which they exploit to locate various resources such as mates, hosts, and resting sites in a watery and dim habitat. To better understand such remarkable abilities, we first investigated the interaction between moisture and the eye surface. An ultrasonic humidifier was used to regulate the relative humidity of the atmosphere and mimic a mist composed of numerous tiny water droplets with diameters less than 10 lm. As the fog was C O M M U N IC A IO N

756 citations