Seung Hwan C. Park

Bio: Seung Hwan C. Park is an academic researcher from Hitachi. The author has contributed to research in topics: Friction stir welding & Welding. The author has an hindex of 22, co-authored 53 publications receiving 3150 citations. Previous affiliations of Seung Hwan C. Park include Tohoku University.

Basal plane texture and flow pattern in friction stir weld of a magnesium alloy

Abstract: The microtextures in a friction-stir-welded magnesium (Mg) alloy, AZ61, with a nugget-shaped stir zone were analyzed by orientation imaging microscopy (OIM). The base material had a (0002) 〈uvi0〉 texture ((0002) parallel to the sheet plane, 〈uvi0〉 parallel to the welding direction). Friction stir welding produced texture components different from those of the base material in the stir zone. Except for the upper surface of the plate, most of the stir zone had a texture with a strong tendency for the (0002) basal plane to align with the surface of the hard pin of the welding tool. Formation of this texture component was attributable to shear deformation arising from the rotation of the hard pin. The (0002) planes tended to align with an ellipsoidal surface in the nugget-shaped stir zone. The present study suggests that the nugget shape, which is a characteristic feature of the stir zone, is strongly related to formation of the ellipsoidal surface described by the (0002) basal plane.

Microstructural factors governing hardness in friction-stir welds of solid-solution-hardened Al alloys

Abstract: Microstructural factors governing hardness in friction-stir welds of the solid-solution-hardened Al alloys 1080 and 5083 were examined by optical microscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The effect of grain boundary on the hardness was examined in an Al alloy 1080 which did not contain any second-phase particles. The weld of Al alloy 1080 had a slightly greater hardness in the stir zone than the base material. The maximum hardness was located in the thermomechanically affected zone (TMAZ). The stir zone consisted of recrystallized fine grains, while the TMAZ had a recovered grain structure. The increase in hardness in the stir zone can be explained by the Hall-Petch relationship. On the other hand, the hardness profiles in the weld of Al alloy 5083 were roughly homogeneous. Friction-stir welding created the fine recrystallized grains in the stir zone and recovered grains in the TMAZ in the weld of this alloy. The stir zone and the TMAZ had slightly higher dislocation densities than the base material. Many small Al6(Mn,Fe) particles were detected in all the grains of the weld. The hardness profiles could not be explained by the Hall-Petch relationship, but rather by Orowan hardening. The results of the present study suggest that the hardness profile is mainly affected by the distribution of small particles in friction-stir welds of Al alloys containing many such particles.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Friction Stir Welding and Processing

Abstract: Friction stir welding (FSW) is a relatively new solid-state joining process. This joining technique is energy efficient, environment friendly, and versatile. In particular, it can be used to join high-strength aerospace aluminum alloys and other metallic alloys that are hard to weld by conventional fusion welding. FSW is considered to be the most significant development in metal joining in a decade. Recently, friction stir processing (FSP) was developed for microstructural modification of metallic materials. In this review article, the current state of understanding and development of the FSW and FSP are addressed. Particular emphasis has been given to: (a) mechanisms responsible for the formation of welds and microstructural refinement, and (b) effects of FSW/FSP parameters on resultant microstructure and final mechanical properties. While the bulk of the information is related to aluminum alloys, important results are now available for other metals and alloys. At this stage, the technology diffusion has significantly outpaced the fundamental understanding of microstructural evolution and microstructure–property relationships.

Friction stir welding of aluminium alloys

Abstract: The comprehensive body of knowledge that has built up with respect to the friction stir welding (FSW) of aluminium alloys since the technique was invented in 1991 is reviewed The basic principles of FSW are described, including thermal history and metal flow, before discussing how process parameters affect the weld microstructure and the likelihood of entraining defects After introducing the characteristic macroscopic features, the microstructural development and related distribution of hardness are reviewed in some detail for the two classes of wrought aluminium alloy (non-heat-treatable and heat-treatable) Finally, the range of mechanical properties that can be achieved is discussed, including consideration of residual stress, fracture, fatigue and corrosion It is demonstrated that FSW of aluminium is becoming an increasingly mature technology with numerous commercial applications In spite of this, much remains to be learned about the process and opportunities for further research a

Severe Plastic Deformation (SPD) Processes for Metals

Abstract: Processes of severe plastic deformation (SPD) are defined as metal forming processes in which a very large plastic strain is imposed on a bulk process in order to make an ultra-fine grained metal The objective of the SPD processes for creating ultra-fine grained metal is to produce lightweight parts by using high strength metal for the safety and reliability of micro-parts and for environmental harmony In this keynote paper, the fabrication process of equal channel angular pressing (ECAP), accumulative roll-bonding (ARB), high pressure torsion (HPT), and others are introduced, and the properties of metals processed by the SPD processes are shown Moreover, the combined processes developed recently are also explained Finally, the applications of the ultra-fine grained (UFG) metals are discussed