Shane J. Kennedy

Bio: Shane J. Kennedy is an academic researcher from Bragg Institute. The author has contributed to research in topics: Neutron diffraction & Neutron. The author has an hindex of 25, co-authored 139 publications receiving 2291 citations. Previous affiliations of Shane J. Kennedy include Australian Nuclear Science and Technology Organisation.

Echidna—the new high-resolution powder diffractometer being built at OPAL

Abstract: A new powder diffractometer aiming for high angular, and thus high reciprocal space, resolution is being constructed within the Neutron Beam Instrumentation Project at the upcoming Australian Neutron Source OPAL, near Sydney. The neutron flux at the sample can be expected to be up to 10 7 n/cm 2 /s. With an array of 128 position sensitive detectors, each equipped with a 30 cm high Soller collimator of 5 arc min acceptance this instrument will have one of the highest performances of its kind. In addition to classical applications in powder diffraction, the quasi two-dimensional detector will be used for rapid texture measurements, where high separation of peaks is necessary. Even single crystal reciprocal space mapping is envisaged. The article compiles an overview of the design, status of the project and potential research activities.

Magnetic properties and magnetocaloric effect of NdMn2−xCuxSi2 compounds

Abstract: Structural and magnetic properties of NdMn2−xCuxSi2 compounds (x = 0–1.0) have been investigated by high intensity x-ray and resolution neutron diffraction (3–450 K), specific heat, dc magnetization, and differential scanning calorimetry measurements. Substitution of Cu for Mn leads to an increase in the lattice parameter a but a decrease in c at room temperature. Two magnetic phase transitions have been found for NdMn2−xCuxSi2 compounds with TN for the antiferromagnetic ordering of Mn-sublatttice and TC for the Nd-sublattice ferromagnetic ordering, respectively. TC increases significantly with increasing Cu content from 36 K at x = 0 to 100 K at x = 1.0. Moreover, it is found that the order of magnetic phase transition around TC also changes from first order at x < 0.6 to second order transition for x ≥ 0.6. The spontaneous magnetization found to decrease with the increase in Cu concentration which can be understood in the term of the dilution effect of Cu for Mn. The values of −ΔSM around TC decrease wi...

QUOKKA, the pinhole small-angle neutron scattering instrument at the OPAL Research Reactor, Australia: design, performance, operation and scientific highlights

Abstract: QUOKKA is a 40 m pinhole small-angle neutron scattering instrument in routine user operation at the OPAL research reactor at the Australian Nuclear Science and Technology Organisation. Operating with a neutron velocity selector enabling variable wavelength, QUOKKA has an adjustable collimation system providing source–sample distances of up to 20 m. Following the large-area sample position, a two-dimensional 1 m2 position-sensitive detector measures neutrons scattered from the sample over a secondary flight path of up to 20 m. Also offering incident beam polarization and analysis capability as well as lens focusing optics, QUOKKA has been designed as a general purpose SANS instrument to conduct research across a broad range of scientific disciplines, from structural biology to magnetism. As it has recently generated its first 100 publications through serving the needs of the domestic and international user communities, it is timely to detail a description of its as-built design, performance and operation as well as its scientific highlights. Scientific examples presented here reflect the Australian context, as do the industrial applications, many combined with innovative and unique sample environments.

Pelican — a Time of Flight Cold Neutron Polarization Analysis Spectrometer at OPAL

Abstract: Pelican, a direct-geometry multi-purpose cold-neutron spectrometer, combines state-of-the-art monochromators and Fermi chopper systems to perform inelastic and quasi-elastic neutron scattering on a variety of materials (powder, polycrystal, single crystal, glass and liquid), covering fields of physics, chemistry and biology. The provision of cryogenic vacuum from sample to detector decreases background to a minimum level. A polarized incident beam is realized by supermirror polarizer and polarization analysis will be achieved by 3He polarization filter. The instrument is designed to accommodate various sample environments including high magnetic fields, and low and high temperatures. Pelican is the first neutron spectrometer having a moveable high-vacuum Aluminium chamber and a full polarization analysis system.

Angle-resolved photoemission studies of the cuprate superconductors

Abstract: The last decade witnessed significant progress in angle-resolved photoemission spectroscopy (ARPES) and its applications. Today, ARPES experiments with 2-meV energy resolution and $0.2\ifmmode^\circ\else\textdegree\fi{}$ angular resolution are a reality even for photoemission on solids. These technological advances and the improved sample quality have enabled ARPES to emerge as a leading tool in the investigation of the high-${T}_{c}$ superconductors. This paper reviews the most recent ARPES results on the cuprate superconductors and their insulating parent and sister compounds, with the purpose of providing an updated summary of the extensive literature. The low-energy excitations are discussed with emphasis on some of the most relevant issues, such as the Fermi surface and remnant Fermi surface, the superconducting gap, the pseudogap and $d$-wave-like dispersion, evidence of electronic inhomogeneity and nanoscale phase separation, the emergence of coherent quasiparticles through the superconducting transition, and many-body effects in the one-particle spectral function due to the interaction of the charge with magnetic and/or lattice degrees of freedom. Given the dynamic nature of the field, we chose to focus mainly on reviewing the experimental data, as on the experimental side a general consensus has been reached, whereas interpretations and related theoretical models can vary significantly. The first part of the paper introduces photoemission spectroscopy in the context of strongly interacting systems, along with an update on the state-of-the-art instrumentation. The second part provides an overview of the scientific issues relevant to the investigation of the low-energy electronic structure by ARPES. The rest of the paper is devoted to the experimental results from the cuprates, and the discussion is organized along conceptual lines: normal-state electronic structure, interlayer interaction, superconducting gap, coherent superconducting peak, pseudogap, electron self-energy, and collective modes. Within each topic, ARPES data from the various copper oxides are presented.

Ferromagnetic materials

Abstract: In this chapter, we will restrict our attention to the ferrites and a few other closely related materials. The great interest in ferrites stems from their unique combination of a spontaneous magnetization and a high electrical resistivity. The observed magnetization results from the difference in the magnetizations of two non-equivalent sub-lattices of the magnetic ions in the crystal structure. Materials of this type should strictly be designated as “ferrimagnetic” and in some respects are more closely related to anti-ferromagnetic substances than they are to ferromagnetics in which the magnetization results from the parallel alignment of all the magnetic moments present. We shall not adhere to this special nomenclature except to emphasize effects, which are due to the existence of the sub-lattices.

Transformation Toughening in Zirconia‐Containing Ceramics

Abstract: The recognition of the potential for enhanced fracture toughness that can be derived from controlled, stress-activated tetragonal (t) to monoclinic (m) transformation in ZrO2-based ceramics ushered in a new era in the development of the mechanical properties of engineering ceramics and provided a major impetus for broader-ranging research into the toughening mechanisms available to enhance the fracture properties of brittle-matrix materials. ZrO2-based systems have remained a major focal point for research as developments in understanding of the crystallography of the t→m transformation have led to more-complete descriptions of the origins of transformation toughening and definition of the features required of a transformation-toughening system. In parallel, there have been significant advances in the design and control of microstructure required to optimize mechanical properties in materials developed commercially. This review concentrates on the science of the t→m transformation in ZrO2 and its application in the modeling of transformation-toughening behavior, while also summarizing the microstructural control needed to use the benefits in ZrO2-toughened ceramics.

Hydrocarbon Separations in a Metal-Organic Framework with Open Iron(II) Coordination Sites

Abstract: The energy costs associated with large-scale industrial separation of light hydrocarbons by cryogenic distillation could potentially be lowered through development of selective solid adsorbents that operate at higher temperatures. Here, the metal-organic framework Fe2(dobdc) (dobdc4- : 2,5-dioxido-1,4-benzenedicarboxylate) is demonstrated to exhibit excellent performance characteristics for separation of ethylene/ethane and propylene/propane mixtures at 318 kelvin. Breakthrough data obtained for these mixtures provide experimental validation of simulations, which in turn predict high selectivities and capacities of this material for the fractionation of methane/ethane/ethylene/acetylene mixtures, removal of acetylene impurities from ethylene, and membrane-based olefin/paraffin separations. Neutron powder diffraction data confirm a side-on coordination of acetylene, ethylene, and propylene at the iron(II) centers, while also providing solid-state structural characterization of the much weaker interactions of ethane and propane with the metal.