scispace - formally typeset
Search or ask a question
Author

Shane M. Eaton

Other affiliations: Eaton Corporation, Istituto Italiano di Tecnologia, Leonardo  ...read more
Bio: Shane M. Eaton is an academic researcher from Polytechnic University of Milan. The author has contributed to research in topics: Laser & Femtosecond. The author has an hindex of 30, co-authored 127 publications receiving 3633 citations. Previous affiliations of Shane M. Eaton include Eaton Corporation & Istituto Italiano di Tecnologia.


Papers
More filters
Journal ArticleDOI
TL;DR: High-repetition rate femtosecond lasers are shown to drive heat accumulation processes that are attractive for rapid writing of low-loss optical waveguides in transparent glasses and accurately tracks the waveguide diameter as cumulative heating expands the modification zone above 200-kHz repetition rate.
Abstract: High-repetition rate femtosecond lasers are shown to drive heat accumulation processes that are attractive for rapid writing of low-loss optical waveguides in transparent glasses. A novel femtosecond fiber laser system (IMRA America, FCPA muJewel) providing variable repetition rate between 0.1 and 5 MHz was used to study the relationship between heat accumulation and resulting waveguide properties in fused silica and various borosilicate glasses. Increasing repetition rate was seen to increase the waveguide diameter and decrease the waveguide loss, with waveguides written with 1-MHz repetition rate yielding ~0.2-dB/cm propagation loss in Schott AF45 glass. A finite-difference thermal diffusion model accurately tracks the waveguide diameter as cumulative heating expands the modification zone above 200-kHz repetition rate.

732 citations

Journal ArticleDOI
TL;DR: Waveguide morphology and thermal modeling indicate that strong thermal diffusion effects at 200 kHz give way to a weak heat accumulation effect at approximately 1 microJ pulse energy for generating low loss waveguides, while stronger heat accumulation effects above 1-MHz repetition rate offered overall superior guiding.
Abstract: A variable (0.2 to 5 MHz) repetition rate femtosecond laser was applied to delineate the role of thermal diffusion and heat accumulation effects in forming low-loss optical waveguides in borosilicate glass across a broad range of laser exposure conditions. For the first time, a smooth transition from diffusion-only transport at 200 kHz repetition rate to strong heat accumulation effects at 0.5 to 2 MHz was observed and shown to drive significant variations in waveguide morphology, with rapidly increasing waveguide diameter that accurately followed a simple thermal diffusion model over all exposure variables tested. Amongst these strong thermal trends, a common exposure window of 200 mW average power and approximately 15-mm/s scan speed was discovered across the range of 200 kHz to 2 MHz repetition rates for minimizing insertion loss despite a 10-fold drop in laser pulse energy. Waveguide morphology and thermal modeling indicate that strong thermal diffusion effects at 200 kHz give way to a weak heat accumulation effect at approximately 1 microJ pulse energy for generating low loss waveguides, while stronger heat accumulation effects above 1-MHz repetition rate offered overall superior guiding. A comprehensive characterization of waveguide properties is presented for laser writing in the thermal diffusion and heat accumulation regimes. The waveguides are shown to be thermally stable up to 800 degrees C and can be written in a convenient 520 microm depth range with low spherical aberration.

330 citations

Journal ArticleDOI
TL;DR: Waveguide writing in fused silica with a novel commercial femtosecond fiber laser system (IMRA America, FCPA microJewel) and the influence of a range of laser parameters were investigated, finding that it was not possible to produce low-loss waveguides when writing with the fundamental wavelength of 1045 nm, but it was possible to fabricate telecom-compatible waveguide at the second harmonic wavelength of 522 nm.
Abstract: We report on waveguide writing in fused silica with a novel commercial femtosecond fiber laser system (IMRA America, FCPA microJewel) The influence of a range of laser parameters were investigated in these initial experiments, including repetition rate, focal area, pulse energy, scan speed, and wavelength Notably, it was not possible to produce low-loss waveguides when writing with the fundamental wavelength of 1045 nm However, it was possible to fabricate telecom-compatible waveguides at the second harmonic wavelength of 522 nm High quality waveguides with propagation losses below 1 dB/cm at 1550 nm were produced with 115 nJ/pulse at 1 MHz and 522 nm

190 citations

Journal ArticleDOI
TL;DR: In this article, the physical and chemical properties of microchannels fabricated by femtosecond laser processing technology in thermoplastic polymeric materials, including poly(methyl methacrylate) (PMMA), polystyrene (PS) and cyclic olefin polymer (COP), were investigated.

165 citations

Journal ArticleDOI
TL;DR: The Roadmap is organized so as to put side by side contributions on different aspects of optical processing, aiming to enhance the cross-contamination of ideas between scientists working in three different fields of photonics: optical gates and logical units, high bit-rate signal processing and optical quantum computing.
Abstract: The ability to process optical signals without passing into the electrical domain has always attracted the attention of the research community. Processing photons by photons unfolds new scenarios, in principle allowing for unseen signal processing and computing capabilities. Optical computation can be seen as a large scientific field in which researchers operate, trying to find solutions to their specific needs by different approaches; although the challenges can be substantially different, they are typically addressed using knowledge and technological platforms that are shared across the whole field. This significant know-how can also benefit other scientific communities, providing lateral solutions to their problems, as well as leading to novel applications. The aim of this Roadmap is to provide a broad view of the state-of-the-art in this lively scientific research field and to discuss the advances required to tackle emerging challenges, thanks to contributions authored by experts affiliated to both academic institutions and high-tech industries. The Roadmap is organized so as to put side by side contributions on different aspects of optical processing, aiming to enhance the cross-contamination of ideas between scientists working in three different fields of photonics: optical gates and logical units, high bit-rate signal processing and optical quantum computing. The ultimate intent of this paper is to provide guidance for young scientists as well as providing research-funding institutions and stake holders with a comprehensive overview of perspectives and opportunities offered by this research field.

142 citations


Cited by
More filters
Journal ArticleDOI
TL;DR: In this article, the physical mechanisms and the main experimental parameters involved in femtosecond laser micromachining of transparent materials, and important emerging applications of the technology are described.
Abstract: Femtosecond laser micromachining can be used either to remove materials or to change a material's properties, and can be applied to both absorptive and transparent substances. Over the past decade, this technique has been used in a broad range of applications, from waveguide fabrication to cell ablation. This review describes the physical mechanisms and the main experimental parameters involved in the femtosecond laser micromachining of transparent materials, and important emerging applications of the technology. Interactions between laser and matter are fascinating and have found a wide range of applications. This article gives an overview of the fundamental physical mechanisms in the processing of transparent materials using ultrafast lasers, as well as important emerging applications of the technology.

2,533 citations

01 Jan 2011

2,117 citations

Journal ArticleDOI
TL;DR: In this paper, a review of the characteristics of ultrafast laser processing and the recent advancements and applications of both surface and volume processing is presented, and a summary of the technology with future outlooks are also given.
Abstract: The unique characteristics of ultrafast lasers, such as picosecond and femtosecond lasers, have opened up new avenues in materials processing that employ ultrashort pulse widths and extremely high peak intensities. Thus, ultrafast lasers are currently used widely for both fundamental research and practical applications. This review describes the characteristics of ultrafast laser processing and the recent advancements and applications of both surface and volume processing. Surface processing includes micromachining, micro- and nanostructuring, and nanoablation, while volume processing includes two-photon polymerization and three-dimensional (3D) processing within transparent materials. Commercial and industrial applications of ultrafast laser processing are also introduced, and a summary of the technology with future outlooks are also given. Scientists in Asia have reviewed the role of ultrafast lasers in materials processing. Koji Sugioka from RIKEN in Japan and Ya Cheng from the Shanghai Institute of Optics and Fine Mechanics in China describe how femtosecond and picosecond lasers can be used to perform useful tasks in both surface and volume processing. Such lasers can cut, drill and ablate a variety of materials with high precision, including metals, semiconductors, ceramics and glasses. They can also polymerize organic materials that contain a suitable photosensitizer and can three-dimensionally process inside transparent materials such as glass, and are already being used to fabricate medical stents, repair photomasks, drill ink-jet nozzles and pattern solar cells. The researchers also explain the characteristics of such lasers and the interaction of ultrashort, intense pulses of light with matter.

973 citations

Journal ArticleDOI
TL;DR: High-repetition rate femtosecond lasers are shown to drive heat accumulation processes that are attractive for rapid writing of low-loss optical waveguides in transparent glasses and accurately tracks the waveguide diameter as cumulative heating expands the modification zone above 200-kHz repetition rate.
Abstract: High-repetition rate femtosecond lasers are shown to drive heat accumulation processes that are attractive for rapid writing of low-loss optical waveguides in transparent glasses. A novel femtosecond fiber laser system (IMRA America, FCPA muJewel) providing variable repetition rate between 0.1 and 5 MHz was used to study the relationship between heat accumulation and resulting waveguide properties in fused silica and various borosilicate glasses. Increasing repetition rate was seen to increase the waveguide diameter and decrease the waveguide loss, with waveguides written with 1-MHz repetition rate yielding ~0.2-dB/cm propagation loss in Schott AF45 glass. A finite-difference thermal diffusion model accurately tracks the waveguide diameter as cumulative heating expands the modification zone above 200-kHz repetition rate.

732 citations

Journal ArticleDOI
TL;DR: A review of the state-of-the-art in the fabrication, characterization and applications of femtosecond-laser micromachined waveguiding structures in optical crystals and ceramics is presented in this article.
Abstract: Femtosecond-laser micromachining (also known as inscription or writing) has been developed as one of the most efficient techniques for direct three-dimensional microfabrication of transparent optical materials. In integrated photonics, by using direct writing of femtosecond/ultrafast laser pulses, optical waveguides can be produced in a wide variety of optical materials. With diverse parameters, the formed waveguides may possess different configurations. This paper focuses on crystalline dielectric materials, and is a review of the state-of-the-art in the fabrication, characterization and applications of femtosecond-laser micromachined waveguiding structures in optical crystals and ceramics. A brief outlook is presented by focusing on a few potential spotlights.

535 citations