Author
Shang-Bo Yu
Bio: Shang-Bo Yu is an academic researcher from Fudan University. The author has contributed to research in topics: Medicine & Chemistry. The author has an hindex of 1, co-authored 1 publications receiving 1230 citations.
Topics: Medicine, Chemistry, Materials science, Nanotechnology, Polymer
Papers
More filters
••
TL;DR: Carbon dots with tunable photoluminescence (PL) and a quantum yield of up to 35% in water were hydrothermally synthesized in one pot and separated via silica column chromatography, and these separated CDs emitted bright and stable luminescence in gradient colors under a single-wavelength UV light.
Abstract: Carbon dots (CDs) with tunable photoluminescence (PL) and a quantum yield of up to 35% in water were hydrothermally synthesized in one pot and separated via silica column chromatography. These separated CDs emitted bright and stable luminescence in gradient colors from blue to red under a single-wavelength UV light. They exhibited high optical uniformity; that is, every sample showed only one peak in the PL excitation spectrum, only one peak in the excitation-independent PL emission spectrum, and similar monoexponential fluorescence lifetimes. Although these samples had similar distributions of particle size and graphite structure in their carbon cores, the surface state gradually varied among the samples, especially the degree of oxidation. Therefore, the observed red shift in their emission peaks from 440 to 625 nm was ascribed to a gradual reduction in their band gaps with the increasing incorporation of oxygen species into their surface structures. These energy bands were found to depend on the surfac...
1,707 citations
••
TL;DR: It is suggested that porous polymers can supply safe and rapid reversal of clinically used heparin anticoagulants, as protamine surrogates, providing an improved approach for their neutralization.
Abstract: Heparins are widely used anticoagulants for surgical procedures and extracorporeal therapies. However, all of them have bleeding risks. Protamine sulfate, the only clinically approved antidote for unfractionated heparin (UFH), has adverse effects. Moreover, protamine can only partially neutralize low‐molecular‐weight heparins (LMWHs) and is not effective for fondaparinux. Here, an inclusion–sequestration strategy for efficient neutralization of heparin anticoagulants by cationic porous supramolecular organic frameworks (SOFs) and porous organic polymers (POPs) is reported. Isothermal titration calorimetric and fluorescence experiments show strong binding affinities of these porous polymers toward heparins, whereas dynamic light scattering and zeta potential analysis confirm that the heparin sequences are adsorbed into the interior of the porous hosts. Activated partial thromboplastin time, anti‐FXa, and thromboelastography assays indicate that their neutralization efficacies are higher than or as high as that of protamine for UFH and generally superior to protamine for LMWHs and fondaparinux, which is further confirmed by tail‐transection model in mice and ex vivo aPTT or anti‐FXa analysis in rats. Acute toxicity evaluations reveal that one of the SOFs displays outstanding biocompatibility. This work suggests that porous polymers can supply safe and rapid reversal of clinically used heparins, as protamine surrogates, providing an improved approach for their neutralization.
12 citations
••
TL;DR: Their nanoscale sizes bring out their ability to overcome the multidrug resistance of tumor cells, which leads to a remarkable enhancement of the bioactivity of the included drugs.
Abstract: ConspectusIn past decades, regular porous architectures have received a great amount of attention because of their versatile functions and applications derived from their efficient adsorption of various guests. However, most reported porous architectures exist only in the solid state. Therefore, their applications as biomaterials may face several challenges, such as phase separation, slow degradation, and long-term accumulation in the body. This Account summarizes our efforts with respect to the development and biomedical applications of water-soluble 3D diamondoid supramolecular organic frameworks (dSOFs), a family of supramolecular polymers that possess intrinsic regular nanoscale porosity.dSOFs have been constructed from tetratopic components and cucurbit[8]uril (CB[8]) through hydrophobically driven encapsulation by CB[8] for intermolecular dimers formed by peripheral aromatic subunits of the tetratopic components in water. All dSOFs exhibit porosity regularity or periodicity in aqueous solution, which is confirmed by solution-phase synchrotron SAXS and XRD experiments. Dynamic light scattering (DLS) reveals that their sizes range from 50 to 150 nm, depending on the concentrations of the components. As nonequilibrium supramolecular architectures, dSOFs can maintain their nanoscale sizes at micromolar concentrations for dozens of hours. Their diamondoid pores have aperture sizes ranging from 2.1 to 3.6 nm, whereas their water solubility and porosity regularity allow them to rapidly include discrete guests driven by ion-pair electrostatic attraction, hydrophobicity, or a combination of the two interactions. The guests may be small molecule or large macromolecular drugs, photodynamic agents (PDAs), or DNA.The rapid inclusion of bioactive guests into dSOFs has led to two important biofunctions. The first is to function as antidotes through including residual drugs. For heparins, the inclusion results in full neutralization of their anticoagulant activity. For clinically used porphyrin PDAs, the inclusion can alleviate their long-term posttreatment phototoxicity but does not reduce their photodynamic efficacy. The second is to function as in situ loading carriers for the intracellular delivery of antitumor drugs or DNA. Their nanoscale sizes bring out their ability to overcome the multidrug resistance of tumor cells, which leads to a remarkable enhancement of the bioactivity of the included drugs. By conjugating aldoxorubicin to tetrahedral components, albumin-mimicking prodrugs have also been constructed, which conspicuously improves the efficacy of aldoxorubicin toward multi-drug-resistant tumors through the delivery of the frameworks. As new supramolecular drugs and carriers, dSOFs are generally biocompatible. Thus, further efforts might lead to medical benefits in the future.
9 citations
••
TL;DR: This review highlights recent progress on water soluble or dispersible POPs for biomedical applications including bioimaging and biosensing, nanocarriers for drug delivery and tumor targeting, phototherapeutics, protein and gene delivery, biomacromolecule encapsulation and discrimination, and anti‐microbial activity.
Abstract: Porous organic polymers (POPs) have become an emerging class of advanced porous organic materials owing to their structural diversity and tailored functions in solid state and organic media. Creating water‐soluble and related water‐dispersible POPs is still very challenging in the research area of porous organic materials. Their porosity‐based functions with diverse topological architectures in aqueous media offer promising platforms in bio‐related fields. This review highlights recent progress on water soluble or dispersible POPs for biomedical applications including bioimaging and biosensing, nanocarriers for drug delivery and tumor targeting, phototherapeutics, protein and gene delivery, biomacromolecule encapsulation and discrimination, and anti‐microbial activity.
8 citations
••
TL;DR: In this paper, a highly water-soluble cucurbit[8]uril (CB[8]) derivative was reported as a broad-spectrum neuromuscular block reversal agent induced by both benzylisquinolinium and aminosteroid NEs by the supramolecular sequestration strategy.
Abstract: Broad-spectrum agents for the reversal of residual curarization induced by neuromuscular blocking agents are of great significance. Here, we report a highly water-soluble cucurbit[8]uril (CB[8]) derivative as a broad-spectrum neuromuscular block reversal agent induced by both benzylisquinolinium and aminosteroid neuromuscular block agents by the supramolecular sequestration strategy. The UV/Vis competition titration assays suggest the high binding affinity of the CB[8] derivative toward both benzylisquinolinium-type cisatracurium besylate and aminosteroid-type rocuronium, vecuronium, and pancuronium, at the level of 107 M-1. In vivo studies demonstrate that the administration of the CB[8] derivative could significantly accelerate the recovery time compared to the placebo or neostigmine groups. The reversal activity of the CB[8] derivative is comparable to or higher than that of clinically approved sugammadex. Acute toxicity evaluations reveal that the CB[8]-derivative displays outstanding biocompatibility, with the maximum tolerance dose as high as 960 mg kg-1.
3 citations
Cited by
More filters
••
TL;DR: It is demonstrated that the CDots can be uniformly dispersed into epoxy resins and be fabricated as transparent CDots/epoxy composites for multiple-color- and white-light-emitting devices.
Abstract: Multiple-color-emissive carbon dots (CDots) have potential applications in various fields such as bioimaging, light-emitting devices, and photocatalysis. The majority of the current CDots to date exhibit excitation-wavelength-dependent emissions with their maximum emission limited at the blue-light region. Here, a synthesis of multiple-color-emission CDots by controlled graphitization and surface function is reported. The CDots are synthesized through controlled thermal pyrolysis of citric acid and urea. By regulating the thermal-pyrolysis temperature and ratio of reactants, the maximum emission of the resulting CDots gradually shifts from blue to red light, covering the entire light spectrum. Specifically, the emission position of the CDots can be tuned from 430 to 630 nm through controlling the extent of graphitization and the amount of surface functional groups, COOH. The relative photoluminescence quantum yields of the CDots with blue, green, and red emission reach up to 52.6%, 35.1%, and 12.9%, respectively. Furthermore, it is demonstrated that the CDots can be uniformly dispersed into epoxy resins and be fabricated as transparent CDots/epoxy composites for multiple-color- and white-light-emitting devices. This research opens a door for developing low-cost CDots as alternative phosphors for light-emitting devices.
820 citations
••
TL;DR: In this paper, the authors discuss the challenges and future direction of CQD-based materials in this booming research field, with a perspective toward the ultimate achievement of highly efficient and long-term stable carbon quantum dot-based photocatalysts.
Abstract: Carbon quantum dots (CQDs) as a rising star of carbon nanomaterials, by virtue of their unique physicochemical, optical and electronic properties, have displayed tremendous momentum in numerous fields such as biosensing, bioimaging, drug delivery, optoelectronics, photovoltaics and photocatalysis. In particular, the rich optical and electronic properties of CQDs including efficient light harvesting, tunable photoluminescence (PL), extraordinary up-converted photoluminescence (UCPL) and outstanding photoinduced electron transfer have attracted considerable interest in different photocatalytic applications for the sake of full utilization of the solar spectrum. This review aims to demonstrate the recent progress in the synthesis, properties and photocatalytic applications of CQDs, particularly highlighting the fundamental multifaceted roles of CQDs in photoredox processes. Furthermore, we discuss the challenges and future direction of CQD-based materials in this booming research field, with a perspective toward the ultimate achievement of highly efficient and long-term stable CQD-based photocatalysts.
764 citations
••
TL;DR: Carbon dots have received an increasing amount of attention because of their significant advantages in terms of low toxicity, chemical inertness, tunable fluorescence, good water solubility, and physicochemical properties as mentioned in this paper.
731 citations
••
TL;DR: CPDs are revealed as an emerging class of CDs with distinctive polymer/carbon hybrid structures and properties, and critical insights into facilitating their potential in various application fields are proposed.
Abstract: Despite the various synthesis methods to obtain carbon dots (CDs), the bottom-up methods are still the most widely administrated route to afford large-scale and low-cost synthesis. However, as CDs are developed with increasing reports involved in producing many CDs, the structure and property features have changed enormously compared with the first generation of CDs, raising classification concerns. To this end, a new classification of CDs, named carbonized polymer dots (CPDs), is summarized according to the analysis of structure and property features. Here, CPDs are revealed as an emerging class of CDs with distinctive polymer/carbon hybrid structures and properties. Furthermore, deep insights into the effects of synthesis on the structure/property features of CDs are provided. Herein, the synthesis methods of CDs are also summarized in detail, and the effects of synthesis conditions of the bottom-up methods in terms of the structures and properties of CPDs are discussed and analyzed comprehensively. Insights into formation process and nucleation mechanism of CPDs are also offered. Finally, a perspective of the future development of CDs is proposed with critical insights into facilitating their potential in various application fields.
631 citations
••
TL;DR: Near-infrared-emissive polymer-carbon nanodots possess two-photon fluorescence; in vivo bioimaging and red-light-emitting diodes based on these PCNDs are demonstrated.
Abstract: Near-infrared-emissive polymer-carbon nanodots (PCNDs) are fabricated by a newly developed facile, high-output strategy. The PCNDs emit at a wavelength of 710 nm with a quantum yield of 26.28%, which is promising for deep biological imaging and luminescent devices. Moreover, the PCNDs possess two-photon fluorescence; in vivo bioimaging and red-light-emitting diodes based on these PCNDs are demonstrated.
620 citations