scispace - formally typeset
Search or ask a question
Author

Shantanu Das

Bio: Shantanu Das is an academic researcher from Bhabha Atomic Research Centre. The author has contributed to research in topics: Fractional calculus & PID controller. The author has an hindex of 24, co-authored 152 publications receiving 2925 citations. Previous affiliations of Shantanu Das include University of Chicago & Jadavpur University.


Papers
More filters
Journal ArticleDOI
TL;DR: In this paper, the authors derived the distribution of relaxation rates of this Curie-von Schweidler law, and showed that the relaxation rate follows Zipf's power law distribution for relaxing time constants, but physical interpretation from the obtained time constants distribution are contradictory to the Zipfian rate relaxation distribution.
Abstract: The classical power law relaxation, i.e. relaxation of current with inverse of power of time for a step-voltage excitation to dielectric—as popularly known as Curie-von Schweidler law is empirically derived and is observed in several relaxation experiments on various dielectrics studies since late 19th Century. This relaxation law is also regarded as “universal-law” for dielectric relaxations; and is also termed as power law. This empirical Curie-von Schewidler relaxation law is then used to derive fractional differential equations describing constituent expression for capacitor. In this paper, we give simple mathematical treatment to derive the distribution of relaxation rates of this Curie-von Schweidler law, and show that the relaxation rate follows Zipf’s power law distribution. We also show the method developed here give Zipfian power law distribution for relaxing time constants. Then we will show however mathematically correct this may be, but physical interpretation from the obtained time constants distribution are contradictory to the Zipfian rate relaxation distribution. In this paper, we develop possible explanation that as to why Zipfian distribution of relaxation rates appears for Curie-von Schweidler Law, and relate this law to time variant rate of relaxation. In this paper, we derive appearance of fractional derivative while using Zipfian power law distribution that gives notion of scale dependent relaxation rate function for Curie-von Schweidler relaxation phenomena. This paper gives analytical approach to get insight of a non-Debye relaxation and gives a new treatment to especially much used empirical Curie-von Schweidler (universal) relaxation law.

21 citations

Journal ArticleDOI
27 Mar 2017-Pramana
TL;DR: In this paper, a fractional-order Schrodinger equation composed of Jumarie fractional derivative is derived for the case of particles in one-dimensional infinite potential well.
Abstract: In this paper we have derived the fractional-order Schrodinger equation composed of Jumarie fractional derivative. The solution of this fractional-order Schrodinger equation is obtained in terms of Mittag–Leffler function with complex arguments, and fractional trigonometric functions. A few important properties of the fractional Schrodinger equation are then described for the case of particles in one-dimensional infinite potential well. One of the motivations for using fractional calculus in physical systems is that the space and time variables, which we often deal with, exhibit coarse-grained phenomena. This means infinitesimal quantities cannot be arbitrarily taken to zero – rather they are non-zero with a minimum spread. This type of non-zero spread arises in the microscopic to mesoscopic levels of system dynamics, which means that, if we denote x as the point in space and t as the point in time, then limit of the differentials dx (and dt) cannot be taken as zero. To take the concept of coarse graining into account, use the infinitesimal quantities as (Δx) α (and (Δt) α ) with 0 < α < 1; called as ‘fractional differentials’. For arbitrarily small Δx and Δt (tending towards zero), these ‘fractional’ differentials are greater than Δx (and Δt), i.e. (Δx) α > Δx and (Δt) α > Δt. This way of defining the fractional differentials helps us to use fractional derivatives in the study of dynamic systems.

20 citations

Journal ArticleDOI
TL;DR: Credible simulation studies are presented to show the effectiveness of the proposed reactor modeling and power level controller design and the achievable accuracies are also elucidated along with the hidden issues, regarding modeling and controller design.

20 citations

Journal ArticleDOI
TL;DR: Chaos synchronization in a master-slave configuration has been studied with a fractional order Proportional-Integral-Derivative (PID) controller using an intelligent Bacterial Foraging Optimization (BFO) algorithm.
Abstract: Chaos synchronization in a master-slave configuration has been studied in this paper with a fractional order (FO) Proportional-Integral-Derivative (PID) controller using an intelligent Bacterial Foraging Optimization (BFO) algorithm. A comparative study has been made to highlight the advantage of using a fractional order PI λ D μ controller over the conventional PID controller for chaos synchronization using two Lu systems as a representative example. Simulation results are presented to show the effectiveness of the proposed chaos synchronization technique over the existing methodologies.

20 citations

Journal ArticleDOI
TL;DR: In this article, the authors present a study of the rheological properties of some visco-elastic materials of biological origin and an aqueous gel of the synthetic clay Laponite.

20 citations


Cited by
More filters
Book ChapterDOI
01 Jan 2015

3,828 citations

01 Nov 2000
TL;DR: In this paper, the authors compared the power density characteristics of ultracapacitors and batteries with respect to the same charge/discharge efficiency, and showed that the battery can achieve energy densities of 10 Wh/kg or higher with a power density of 1.2 kW/kg.
Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

2,437 citations

01 Sep 2010

2,148 citations

Book ChapterDOI
11 Dec 2012

1,704 citations

Book ChapterDOI
01 Jan 2014
TL;DR: In this paper, Dzherbashian [Dzh60] defined a function with positive α 1 > 0, α 2 > 0 and real α 1, β 2, β 3, β 4, β 5, β 6, β 7, β 8, β 9, β 10, β 11, β 12, β 13, β 14, β 15, β 16, β 17, β 18, β 20, β 21, β 22, β 24
Abstract: Consider the function defined for \(\alpha _{1},\ \alpha _{2} \in \mathbb{R}\) (α 1 2 +α 2 2 ≠ 0) and \(\beta _{1},\beta _{2} \in \mathbb{C}\) by the series $$\displaystyle{ E_{\alpha _{1},\beta _{1};\alpha _{2},\beta _{2}}(z) \equiv \sum _{k=0}^{\infty } \frac{z^{k}} {\varGamma (\alpha _{1}k +\beta _{1})\varGamma (\alpha _{2}k +\beta _{2})}\ \ (z \in \mathbb{C}). }$$ (6.1.1) Such a function with positive α 1 > 0, α 2 > 0 and real \(\beta _{1},\beta _{2} \in \mathbb{R}\) was introduced by Dzherbashian [Dzh60].

919 citations