Sharul Kamal Abdul Rahim

Bio: Sharul Kamal Abdul Rahim is an academic researcher from Universiti Teknologi Malaysia. The author has contributed to research in topics: Antenna (radio) & Microstrip antenna. The author has an hindex of 24, co-authored 234 publications receiving 2348 citations. Previous affiliations of Sharul Kamal Abdul Rahim include Universiti Malaysia Perlis & Nanjing University of Science and Technology.

Wearable Antennas: A Review of Materials, Structures, and Innovative Features for Autonomous Communication and Sensing

Abstract: Wearable antennas have gained much attention in recent years due to their attractive features and possibilities in enabling lightweight, flexible, low cost, and portable wireless communication and sensing. Such antennas need to be conformal when used on different parts of the human body, thus need to be implemented using flexible materials and designed in a low profile structure. Ultimately, these antennas need to be capable of operating with minimum degradation in proximity to the human body. Such requirements render the design of wearable antennas challenging, especially when considering aspects such as their size compactness, effects of structural deformation and coupling to the body, and fabrication complexity and accuracy. Despite slight variations in severity according to applications, most of these issues exist in the context of body-worn implementation. This review aims to present different challenges and issues in designing wearable antennas, their material selection, and fabrication techniques. More importantly, recent innovative methods in back radiations reduction techniques, circular polarization (CP) generation methods, dual polarization techniques, and providing additional robustness against environmental effects are first presented. This is followed by a discussion of innovative features and their respective methods in alleviating these issues recently proposed by the scientific community researching in this field.

Measurement of Wet Antenna Losses on 26 GHz Terrestrial Microwave Link in Malaysia

Abstract: This letter discusses the effect of antenna losses due to rain on a 26 GHz microwave link and the technique of extracting the losses from the measured rain attenuation A 2-feet parabolic dish antenna with horizontal polarization has been used in the study The measurement results have been compared with those obtained from other locations in Malaysia and some other Published Research works The study will provide useful information in the microwave link planning and design in tropical regions; and it can also be adapted to satellite communication operating at ka-band

Beamforming in Wireless Energy Harvesting Communications Systems: A Survey

Abstract: Wireless energy harvesting (EH) is a promising solution to prolong lifetime of power-constrained networks such as military and sensor networks. The high sensitivity of energy transfer to signal decay due to path loss and fading, promotes multi-antenna techniques like beamforming as the candidate transmission scheme for EH networks. Exploiting beamforming in EH networks has gained overwhelming interest, and lot of literature has appeared recently regarding this topic. The objective of this paper is to point out the state-of-the-art research activity on beamforming implementation in EH wireless networks. We first review the basic concepts and architecture of EH wireless networks. In addition, we also discuss the effects of beamforming transmission scheme on system performance in EH wireless communication. Furthermore, we present a comprehensive survey of multi-antenna EH communications. We cover the supporting network architectures like broadcasting, relay, and cognitive radio networks with the various beamforming deployment within the network architecture. We classify the different beamforming approaches in each network topology according to its design objective such as increasing the throughput, enhancing the energy transfer efficiency, and minimizing the total transmit power, with paying special attention to exploiting the physical layer security. We also survey major advances as well as open issues, challenges, and future research directions in multi-antenna EH communications.

Distributed and Collaborative Beamforming in Wireless Sensor Networks: Classifications, Trends, and Research Directions

Abstract: Distributed and collaborative beamforming (DCBF) scheme in wireless sensor networks (WSNs) is receiving new-found interest in recent times due to the rapid advancements in wireless technology and embedded systems. Although studies on distributed and collaborative beamforming have been carried out for more than ten years, the DCBF was initially considered impractical due to high complexity and hardly achievable requirements. It gained prominence only in the past few years as small wireless communication electronic sensors with high processing capability became easily available. Recent works showcasing distributed and collaborative beamforming as a suitable solution for 5G communication systems such as mm-wave communication and machine to machine communications has further ignited the interest in this research field. Motivated by these factors, this paper presents a survey on the research trends of distributed and collaborative beamforming in WSNs. We provide classifications of the DCBF research areas and conduct an extensive review of the various proposals which have appeared in the literature for each classification. This survey uncovered that majority of existing research can be broadly divided into four major research trends: beampattern analysis, power and lifetime optimization, synchronization, and finally, prototype design. The inherent features, constraints and challenges of each research category in the distributed and collaborative beamforming are presented and the lessons learned from the shortcomings of previous research are summarized. Finally, this paper has unveiled open research directions in the field of distributed and collaborative beamforming in WSNs.

A Low Profile, Dual-band, Dual Polarized Antenna for Indoor/Outdoor Wearable Application

Abstract: A planar, low-profile, dual-band and dual-polarized antenna on a semi-flex substrate is proposed in this paper. The antenna is fabricated on Rogers substrate with a thickness of 3.04 mm and sized at $70.4 \times 76.14 \times 3.11$ mm3 ( $0.37\lambda _{0} \times 0.40\lambda _{0}\times 0.016 \lambda _{0}$ ) only. The circular polarization property is enabled in the global navigation satellite system (GNSS) L1/E1 (lower) band by introducing a complementary split ring resonator on the antenna patch. Meanwhile, the antenna operates in the second (upper) 2.45 GHz WLAN band is enabled by etching a U-shaped slot on its ground plane. This simultaneous, dual-band and dual-polarized operation enables the proposed antenna to be applied in the indoor/outdoor wearable application. To isolate the antenna against the influence of the human body, a multiband artificial magnetic conductor (AMC) plane is added on the reverse side of the dual-band radiator. Comparison of the antenna without AMC in free space and when evaluated on the chest of a human body backed by AMC showed improved gain; from 3–5.1 dBi in the lower band, and from 1.53–5.03 dBi in the upper band. Besides that, the front-to-back ratio of the AMC backed monopole antenna also improved from 11–21.88 dB and from 2.5–24.5 dB in the GNSS and WLAN bands, respectively. Next, the specific absorption rate (SAR) of the monopole antenna with and without the AMC plane is assessed. Evaluation results indicate that the maximum SAR value decreased by up to 89.45% in comparison with the antenna without AMC in the lower band. This indicates the effectiveness of the AMC array in increasing gain and FBR, besides reducing EM absorption in the human body.

I and i

Abstract: There is, I think, something ethereal about i —the square root of minus one. I remember first hearing about it at school. It seemed an odd beast at that time—an intruder hovering on the edge of reality. Usually familiarity dulls this sense of the bizarre, but in the case of i it was the reverse: over the years the sense of its surreal nature intensified. It seemed that it was impossible to write mathematics that described the real world in …

Big IoT Data Analytics: Architecture, Opportunities, and Open Research Challenges

Abstract: Voluminous amounts of data have been produced, since the past decade as the miniaturization of Internet of things (IoT) devices increases. However, such data are not useful without analytic power. Numerous big data, IoT, and analytics solutions have enabled people to obtain valuable insight into large data generated by IoT devices. However, these solutions are still in their infancy, and the domain lacks a comprehensive survey. This paper investigates the state-of-the-art research efforts directed toward big IoT data analytics. The relationship between big data analytics and IoT is explained. Moreover, this paper adds value by proposing a new architecture for big IoT data analytics. Furthermore, big IoT data analytic types, methods, and technologies for big data mining are discussed. Numerous notable use cases are also presented. Several opportunities brought by data analytics in IoT paradigm are then discussed. Finally, open research challenges, such as privacy, big data mining, visualization, and integration, are presented as future research directions.

Ambient Backscatter Communications: A Contemporary Survey

Abstract: Recently, ambient backscatter communication has been introduced as a cutting-edge technology which enables smart devices to communicate by utilizing ambient radio frequency (RF) signals without requiring active RF transmission. This technology is especially effective in addressing communication and energy efficiency problems for low-power communications systems such as sensor networks, and thus it is expected to realize numerous Internet-of-Things applications. Therefore, this paper aims to provide a contemporary and comprehensive literature review on fundamentals, applications, challenges, and research efforts/progress of ambient backscatter communications. In particular, we first present fundamentals of backscatter communications and briefly review bistatic backscatter communications systems. Then, the general architecture, advantages, and solutions to address existing issues and limitations of ambient backscatter communications systems are discussed. Additionally, emerging applications of ambient backscatter communications are highlighted. Finally, we outline some open issues and future research directions.

Non-Orthogonal Multiple Access (NOMA) for cellular future radio access

Abstract: Radio access technologies for cellular mobile communications are typically characterized by multiple access schemes, e.g., frequency division multiple access (FDMA), time division multiple access (TDMA), code division multiple access (CDMA), and OFDMA. In the 4th generation (4G) mobile communication systems such as Long-Term Evolution (LTE) (Au et al., Uplink contention based SCMA for 5G radio access. Globecom Workshops (GC Wkshps), 2014. doi:10.1109/GLOCOMW.2014.7063547) and LTE-Advanced (Baracca et al., IEEE Trans. Commun., 2011. doi:10.1109/TCOMM.2011.121410.090252; Barry et al., Digital Communication, Kluwer, Dordrecht, 2004), standardized by the 3rd Generation Partnership Project (3GPP), orthogonal multiple access based on OFDMA or single carrier (SC)-FDMA is adopted. Orthogonal multiple access was a reasonable choice for achieving good system-level throughput performance with simple single-user detection. However, considering the trend in 5G, achieving significant gains in capacity and system throughput performance is a high priority requirement in view of the recent exponential increase in the volume of mobile traffic. In addition the proposed system should be able to support enhanced delay-sensitive high-volume services such as video streaming and cloud computing. Another high-level target of 5G is reduced cost, higher energy efficiency and robustness against emergencies.

Metal oxide nanoparticles and their applications in nanotechnology

Abstract: Considering metal oxide nanoparticles as important technological materials, authors provide a comprehensive review of researches on metal oxide nanoparticles, their synthetic strategies, and techniques, nanoscale physicochemical properties, defining specific industrial applications in the various fields of applied nanotechnology. This work expansively reviews the recent developments of semiconducting metal oxide gas sensors for environmental gases including CO2, O2, O3, and NH3; highly toxic gases including CO, H2S, and NO2; combustible gases such as CH4, H2, and liquefied petroleum gas; and volatile organic compounds gases. The gas sensing properties of different metal oxides nanoparticles towards specific target gases have been individually discussed. Promising metal oxide nanoparticles for sensitive and selective detection of each gas have been identified. This review also categorizes metal oxides sensors by analyte gas and also summarizes the major techniques and synthesis strategies used in nanotechnology. Additionally, strategies, sensing mechanisms and related applications of semiconducting metal oxide materials are also discussed in detail. Related applications are innumerable trace to ultratrace-level gas sensors, batteries, magnetic storage media, various types of solar cells, metal oxide nanoparticles applications in catalysis, energy conversion, and antennas (including microstrip and patch-type optically transparent antennas), rectifiers, optoelectronic, and electronics.