Shawn A. Sapp

Bio: Shawn A. Sapp is an academic researcher from Colorado State University. The author has contributed to research in topics: Conductive polymer & Electrochromism. The author has an hindex of 12, co-authored 23 publications receiving 1758 citations. Previous affiliations of Shawn A. Sapp include University of Florida.

Substituted polypyridine complexes of cobalt(II/III) as efficient electron-transfer mediators in dye-sensitized solar cells.

Abstract: A number of cobalt complexes of substituted polypyridine ligands were synthesized and investigated as possible alternatives to the volatile and corrosive iodide/triiodide redox couple commonly used as an electron-transfer mediator in dye-sensitized solar cells (DSSCs). The extinction coefficients in the visible spectrum are on the order of 10(2) M(-1) cm(-1) for the majority of these complexes, diminishing competition with the light-harvesting dye. Cyclic voltammetric studies revealed a dramatic surface dependence of the heterogeneous electron-transfer rate, which is surprisingly different for gold, carbon, and platinum electrodes. DSSCs were assembled using a mediator that consisted of a mixture of Co(II) and Co(III) complexes in a 10:1 ratio. DSSCs containing these mediators were used to characterize incident photon-to-current conversion efficiency and photoelectrochemical responses. The best performing of these mediators were identified and subjected to further study. As suggested by electrochemical results, gold and carbon are superior cathode materials to platinum, and no evidence of corrosion on any cathode material was observed. Addition of lithium salts to the mediator solution resulted in a dramatic improvement in cell performance. The observed Li(+) effect is explained in terms of the recombination of injected electrons in the photoanode with the oxidized mediator. The best mediator, based on tris(4,4'-di-tert-butyl-2,2'-dipyridyl)cobalt(II/III) perchlorate, resulted in DSSCs exhibiting efficiencies within 80% of that of a comparable iodide/triiodide-mediated DSSC. Due to the commercial availability of the ligand and the simplicity with which the complex can be made, this new mediator represents a nonvolatile, noncorrosive, and practical alternative as an efficient electron-transfer mediator in DSSCs.

High Contrast Ratio and Fast-Switching Dual Polymer Electrochromic Devices

Abstract: A series of dual polymer electrochromic devices (ECDs) based on 12 complementary pairs of conducting polymer films have been constructed using 3,4-ethylenedioxythiophene-containing conducting polymers. Poly[3,6-bis(2-(3,4-ethylenedioxythiophene))-N-methylcarbazole] (PBEDOT-NCH3Cz), poly[3,6-bis(2-(3,4-ethylenedioxythiophene))-N-eicosylcarbazole] (PBEDOT-NC20H41Cz), and poly[4,4‘-bis(2-(3,4-ethylenedioxythiophene))biphenyl] (PBEDOT-BP) were utilized as anodically coloring polymers that electrochemically switch between an oxidized deep blue absorptive state and a transmissive (orange or yellow) reduced state. Poly(3,4-ethylenedioxythiophene) (PEDOT) and its alkyl derivatives (PEDOT-C14H29 and PEDOT-C16H33) have been used as high-contrast cathodically coloring polymers that switch between a deep blue absorptive state in the reduced form and a sky blue, highly transmissive state in the oxidized form. The dual polymer ECDs were constructed by separating complementary pairs of EC polymer films, deposited on ITO...

Template Synthesis of Bismuth Telluride Nanowires

Abstract: : We report the fabrication of thermoelectric bismuth telluride nanowires using the template synthesis method. A simple electrodeposition procedure was used to produce the nanowires within the pores of an alumina filtration membrane. The resulting bismuth telluride/alumina composite membranes constitute an array of thermoelectric nanowires surrounded by a thermally and electrically insulating matrix. The individual bismuth telluride nanowires can be isolated by removal of the template membrane. These nanowires were characterized and found to be composed of stoichiometric bismuth telluride.

Dye-Sensitized Solar Cells

Abstract: Dye-sensitized solar cells (DSCs) offer the possibilities to design solar cells with a large flexibility in shape, color, and transparency. DSC research groups have been established around the worl ...

Porphyrin-Sensitized Solar Cells with Cobalt (II/III)–Based Redox Electrolyte Exceed 12 Percent Efficiency

Abstract: The iodide/triiodide redox shuttle has limited the efficiencies accessible in dye-sensitized solar cells. Here, we report mesoscopic solar cells that incorporate a Co(II/III)tris(bipyridyl)–based redox electrolyte in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer (designated YD2-o-C8). The specific molecular design of YD2-o-C8 greatly retards the rate of interfacial back electron transfer from the conduction band of the nanocrystalline titanium dioxide film to the oxidized cobalt mediator, which enables attainment of strikingly high photovoltages approaching 1 volt. Because the YD2-o-C8 porphyrin harvests sunlight across the visible spectrum, large photocurrents are generated. Cosensitization of YD2-o-C8 with another organic dye further enhances the performance of the device, leading to a measured power conversion efficiency of 12.3% under simulated air mass 1.5 global sunlight.

Porphyrin-sensitized solar cells with cobalt (II/III)-based redox electrolyte exceed 12 percent efficiency (vol 334, pg 629, 2011)

Abstract: Simultaneous modification of the dye and redox shuttle boosts the efficiency of a dye-sensitized solar cell. The iodide/triiodide redox shuttle has limited the efficiencies accessible in dye-sensitized solar cells. Here, we report mesoscopic solar cells that incorporate a Co(II/III)tris(bipyridyl)–based redox electrolyte in conjunction with a custom synthesized donor-π-bridge-acceptor zinc porphyrin dye as sensitizer (designated YD2-o-C8). The specific molecular design of YD2-o-C8 greatly retards the rate of interfacial back electron transfer from the conduction band of the nanocrystalline titanium dioxide film to the oxidized cobalt mediator, which enables attainment of strikingly high photovoltages approaching 1 volt. Because the YD2-o-C8 porphyrin harvests sunlight across the visible spectrum, large photocurrents are generated. Cosensitization of YD2-o-C8 with another organic dye further enhances the performance of the device, leading to a measured power conversion efficiency of 12.3% under simulated air mass 1.5 global sunlight.

Carbon-Carbon Coupling Reactions Catalyzed by Heterogeneous Palladium Catalysts

Abstract: 4.4. Pd on Modified Silica 159 4.5. Pd on Clay and Other Inorganic Materials 159 5. Stille, Fukuyama, and Negishi Reactions 159 5.1. Stille Reactions 159 5.1.1. Pd on Carbon (Pd/C) 159 5.1.2. Palladium on KF/Al2O3 159 5.1.3. Pd on Modified Silica (SiO2/TEG/Pd) 159 5.2. Fukuyama Reactions 159 5.2.1. Pd on Carbon (Pd/C) 159 5.2.2. Pd(OH)2 on Carbon (Perlman’s Catalyst) 160 5.3. Pd/C-Catalyzed Negishi Reactions 160 6. Ullmann-Type Coupling Reactions 161 6.1. Pd/C-Catalyzed Aryl−Aryl Coupling 161 6.2. Pd/C-Catalyzed Homocoupling of Vinyl Halides 162

Organic materials for electronic and optoelectronic devices

Abstract: This article concentrates on our recent results on several classes of photo- and electro-active organic materials that permit thin film formation and discusses their synthesis, properties, functions and potential applications for electronic and optoelectronic devices. The materials studied include amorphous molecular materials, titanyl phthalocyanine, oligothiophenes with well-defined structures, and non-conjugated polymers containing pendant oligothiophenes or other π-electron systems. The thin films of these materials find potential applications for use in organic electroluminescent, photovoltaic, electrochromic, and other devices.