scispace - formally typeset
Search or ask a question
Author

Sheng-Guo Lu

Bio: Sheng-Guo Lu is an academic researcher from Guangdong University of Technology. The author has contributed to research in topics: Electrocaloric effect & Ceramic. The author has an hindex of 27, co-authored 113 publications receiving 4103 citations. Previous affiliations of Sheng-Guo Lu include Pennsylvania State University & Foundation University, Islamabad.


Papers
More filters
Journal ArticleDOI
08 Aug 2008-Science
TL;DR: It was determined that a large ECE can be realized in the ferroelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] copolymer at temperatures above the feroelectric-paraelectric transition (above 70°C), where an isothermal entropy change of more than 55 joules per kilogram per kelvin degree and adiabatic temperature change were observed.
Abstract: Applying an electrical field to a polar polymer may induce a large change in the dipolar ordering, and if the associated entropy changes are large, they can be explored in cooling applications. With the use of the Maxwell relation between the pyroelectric coefficient and the electrocaloric effect (ECE), it was determined that a large ECE can be realized in the ferroelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] copolymer at temperatures above the ferroelectric-paraelectric transition (above 70°C), where an isothermal entropy change of more than 55 joules per kilogram per kelvin degree and adiabatic temperature change of more than 12°C were observed. We further showed that a similar level of ECE near room temperature can be achieved by working with the relaxor ferroelectric polymer of P(VDF-TrFE-chlorofluoroethylene).

985 citations

Journal ArticleDOI
TL;DR: The electrocaloric effect (ECE) in dielectric materials has great potential in realizing solid-state cooling devices with compact size and high efficiency, which are highly desirable for a broad range of applications as mentioned in this paper.
Abstract: The electrocaloric effect (ECE) in dielectric materials has great potential in realizing solid-state cooling devices with compact size and high efficiency, which are highly desirable for a broad range of applications. This paper presents the general considerations for dielectric materials to achieve large ECE and reviews the experimental efforts investigating ECE in various polar dielectrics. For practical cooling devices, an ECE material must possess a large isothermal entropy change besides a large adiabatic temperature change. We show that polar dielectrics operated at temperatures near order―disorder transition have potential to achieve large ECE due to the possibility of large change in polarization induced by electric field and large entropy change associated with the polarization change. We further show that indeed the ferroelectric poly(vinylidene fluoride-trifluoroethylene)-based polymers display a large ECE, i.e., an isothermal entropy change of more than 55 J (kgK) ―1 and an adiabatic temperature change of more than 12 °C, at temperatures above the order-disorder transition.

386 citations

Journal ArticleDOI
TL;DR: In this article, the electrocaloric effect (ECE) in inorganic thin film and organic relaxor ferroelectrics is investigated by directly measuring the ECE around room temperature, and the results reveal that giant ECEs can be obtained in the high energy electron irradiated poly(vinylidene fluoride-trifluoroethylene) relaxor copolymer and in the La-doped Pb(ZrTi)O3 relaxor ceramic thin films, which are much larger than that from the normal ferroelectric counterparts.
Abstract: The electrocaloric effect (ECE) in inorganic thin film and organic relaxor ferroelectrics is investigated by directly measuring the ECE around room temperature. The results reveal that giant ECEs can be obtained in the high energy electron irradiated poly(vinylidene fluoride-trifluoroethylene) relaxor copolymer and in the La-doped Pb(ZrTi)O3 relaxor ceramic thin films, which are much larger than that from the normal ferroelectric counterparts. The large ECE observed, compared with normal ferroelectrics, is likely caused by the large number of disordered fluctuating polarization entities in relaxor ferroelectrics which can lead to extra entropy contributions and larger ECE.

307 citations

Journal ArticleDOI
TL;DR: In this paper, the authors reported the directly measured electrocaloric effect (ECE) (the adiabatic temperature change ΔT) of relaxor ferroelectric poly(vinylidene fluoride-trifluorethylene-chlorofluoroethylene).
Abstract: We report the directly measured electrocaloric effect (ECE) (the adiabatic temperature change ΔT) of relaxor ferroelectric poly(vinylidene fluoride-trifluoroethylene-chlorofluoroethylene) terpolymer and its blend with poly(vinylidene fluoride-chlorotrifluoroethylene). The results show that the directly measured ΔT in the relaxor terpolymer is much larger than that deduced from Maxwell relation and that the relaxor terpolymer possesses a giant ECE at room temperature. The large difference between the directly measured ΔT and that deduced indicates that the Maxwell relation, which is derived for ergodic systems, is not suitable for deducing ECE in the relaxor ferroelectric polymers, which are nonergodic (polar-glass) material systems.

209 citations

Journal ArticleDOI
TL;DR: A comprehensive review of various strategies is presented for enhancing the stability of the anode of lithium sulfur batteries, including inserting an interlayer, modifying the separator and electrolytes, employing artificial protection layers, and alternative anodes to replace the Li metal anode.
Abstract: Owing to their theoretical energy density of 2600 Wh kg-1 , lithium-sulfur batteries represent a promising future energy storage device to power electric vehicles. However, the practical applications of lithium-sulfur batteries suffer from poor cycle life and low Coulombic efficiency, which is attributed, in part, to the polysulfide shuttle and Li dendrite formation. Suppressing Li dendrite growth, blocking the unfavorable reaction between soluble polysulfides and Li, and improving the safety of Li-S batteries have become very important for the development of high-performance lithium sulfur batteries. A comprehensive review of various strategies is presented for enhancing the stability of the anode of lithium sulfur batteries, including inserting an interlayer, modifying the separator and electrolytes, employing artificial protection layers, and alternative anodes to replace the Li metal anode.

203 citations


Cited by
More filters
01 Nov 2000
TL;DR: In this paper, the authors compared the power density characteristics of ultracapacitors and batteries with respect to the same charge/discharge efficiency, and showed that the battery can achieve energy densities of 10 Wh/kg or higher with a power density of 1.2 kW/kg.
Abstract: The science and technology of ultracapacitors are reviewed for a number of electrode materials, including carbon, mixed metal oxides, and conducting polymers. More work has been done using microporous carbons than with the other materials and most of the commercially available devices use carbon electrodes and an organic electrolytes. The energy density of these devices is 3¯5 Wh/kg with a power density of 300¯500 W/kg for high efficiency (90¯95%) charge/discharges. Projections of future developments using carbon indicate that energy densities of 10 Wh/kg or higher are likely with power densities of 1¯2 kW/kg. A key problem in the fabrication of these advanced devices is the bonding of the thin electrodes to a current collector such the contact resistance is less than 0.1 cm2. Special attention is given in the paper to comparing the power density characteristics of ultracapacitors and batteries. The comparisons should be made at the same charge/discharge efficiency.

2,437 citations

Journal ArticleDOI
TL;DR: This Review tries to summarize what remarkable progress in multiferroic magnetoelectric composite systems has been achieved in most recent few years, with emphasis on thin films; and to describe unsolved issues and new device applications which can be controlled both electrically and magnetically.
Abstract: Multiferroic magnetoelectric composite systems such as ferromagnetic-ferroelectric heterostructures have recently attracted an ever-increasing interest and provoked a great number of research activities, driven by profound physics from coupling between ferroelectric and magnetic orders, as well as potential applications in novel multifunctional devices, such as sensors, transducers, memories, and spintronics. In this Review, we try to summarize what remarkable progress in multiferroic magnetoelectric composite systems has been achieved in most recent few years, with emphasis on thin films; and to describe unsolved issues and new device applications which can be controlled both electrically and magnetically.

1,642 citations

Journal ArticleDOI
TL;DR: This review first outlines the crucial issues in the nanodielectric field and then focuses on recent remarkable research developments in the fabrication of FNDMs with special constitutents, molecular structures, and microstructures.
Abstract: Study of flexible nanodielectric materials (FNDMs) with high permittivity is one of the most active academic research areas in advanced functional materials. FNDMs with excellent dielectric properties are demonstrated to show great promise as energy-storage dielectric layers in high-performance capacitors. These materials, in common, consist of nanoscale particles dispersed into a flexible polymer matrix so that both the physical/chemical characteristics of the nanoparticles and the interaction between the nanoparticles and the polymers have crucial effects on the microstructures and final properties. This review first outlines the crucial issues in the nanodielectric field and then focuses on recent remarkable research developments in the fabrication of FNDMs with special constitutents, molecular structures, and microstructures. Possible reasons for several persistent issues are analyzed and the general strategies to realize FNDMs with excellent integral properties are summarized. The review further highlights some exciting examples of these FNDMs for power-energy-storage applications.

1,131 citations

Journal ArticleDOI
TL;DR: The resulting magnetocaloric, electrocaloric and mechanocaloric effects are compared here in terms of history, experimental method, performance and prospective cooling applications.
Abstract: A magnetically, electrically or mechanically responsive material can undergo significant thermal changes near a ferroic phase transition when its order parameter is modified by the conjugate applied field. The resulting magnetocaloric, electrocaloric and mechanocaloric (elastocaloric or barocaloric) effects are compared here in terms of history, experimental method, performance and prospective cooling applications.

1,101 citations

Journal ArticleDOI
TL;DR: In this paper, the authors outline how lead-free relaxors can offer a route to an environmentally safer option in this outstanding material class and discuss properties of uniaxial, planar, and volumetric relaxor compositions.
Abstract: Feature size is a natural determinant of material properties. Its design offers the technological perspectives for material improvement. Grain size, crystallite size, domain width, and structural defects of different nature constitute the classical design elements. Common ferroelectric ceramics contain micrometer grain sizes and submicrometer domain widths. Domain wall mobility is a major contribution to their macroscopic material properties providing approximately half of the macroscopic output in optimized materials. The extension into the dynamic nanoworld is provided by relaxor ferroelectrics. Ionic and nanoscale field disorders form the base to a state with natural nanometer-size polar structures even in bulk materials. These polar structures are highly mobile and can dynamically change over several orders of magnitude in time and space being extremely sensitive to external stimuli. This yields among the largest dielectric and piezoelectric constants known. In this feature article, we want to outline how lead-free relaxors will offer a route to an environmentally safer option in this outstanding material class. Properties of uniaxial, planar, and volumetric relaxor compositions will be discussed. They provide a broader and more interesting scope of physical properties and features than the classical lead-containing relaxor compositions.

750 citations