Shigeru Nagase

Bio: Shigeru Nagase is an academic researcher from Pusan National University. The author has contributed to research in topics: Decarbonylation & Adsorption. The author has an hindex of 6, co-authored 6 publications receiving 1143 citations. Previous affiliations of Shigeru Nagase include University of New Hampshire & University of Puerto Rico, Río Piedras.

Hydrazine and Thermal Reduction of Graphene Oxide: Reaction Mechanisms, Product Structures, and Reaction Design

Abstract: The density functional theory method (M05-2X/6-31G(d)) was used to investigate reaction mechanisms for deoxygenation of graphene oxides (GOs) with hydrazine or heat treatment. Three mechanisms were identified as reducing epoxide groups of GO with hydrazine as a reducing agent. No reaction path was found for the hydrazine-mediated reductions of the hydroxyl, carbonyl, and carboxyl groups of GO. We instead discovered the mechanisms for dehydroxylation, decarbonylation, and decarboxylation using heat treatment. The hydrazine de-epoxidation and thermal dehydroxylation of GO have opposite dependencies on the reaction temperature. In both reduction types, the oxygen functionalities attached to the interior of an aromatic domain in GO are removed more easily, both kinetically and thermodynamically, than those attached at the edges of an aromatic domain. The hydrazine-mediated reductions of epoxide groups at the edges are suspended by forming hydrazino alcohols. We provide atomic-level elucidation for the deoxyge...

Density Functional Theory Study of Catechol Adhesion on Silica Surfaces

Abstract: It has been speculated that the catechol (1,2-dihydroxybenzene) functionality of marine mussels is responsible for its strong and versatile adhesion on various wet surfaces. To elucidate features of this adhesion, we performed a periodic density functional theory calculation for catechol adsorption on silica surfaces. We obtained its binding energy and geometry on two representative hydroxylated surfaces of cristobalite, which mimic amorphous silica. Catechol strongly adhered to both surfaces by making three or four hydrogen bonds. Catechol achieved versatility in adhesion via torsion of its hydroxyls. The binding energy of catechol, which amounts to 14 kcal/mol, was larger than that of water, irrespective of the surface. With the inclusion of dispersion interaction, the binding energy of catechol further increased up to 33 kcal/mol, and its preferential adsorption over water became evident. Both the hydroxyls and phenylene ring of catechol contribute to its strong adhesion due to hydrogen bonds and dispe...

Oxidation Unzipping of Stable Nanographenes into Joint Spin-Rich Fragments

Abstract: When an all-benzenoid nanographene is linearly unzipped into oxygen-joined fragments, the oxidized benzenoid rings (aromatic sextets) selectively adopt the low-spin (ΔS = 0) or high-spin conformation (ΔS = 1) to yield the thermally most stable isomer. The selection of the conformation depends simply on the position of the aromatic sextets: the inner ones prefer the high-spin conformation, whereas the peripheral ones prefer the low-spin conformation. Therefore, the resulting most stable isomer has a total spin whose value equals the number of inner aromatic sextets (ni) along the oxidizing line. The nanographene fragments contained in this isomer have a ferromagnetic spin coupling. Due to the tautomerization between the high-spin and low-spin conformations, there also exist other possible isomers with higher energies and with spins at ground state ranging from 0 to (ni − 1). The rich geometrically correlated spins and the adjustable energy gaps indicate great potential of the graphene oxides in spintronic ...

Improved Synthesis of Graphene Oxide

Abstract: An improved method for the preparation of graphene oxide (GO) is described. Currently, Hummers’ method (KMnO4, NaNO3, H2SO4) is the most common method used for preparing graphene oxide. We have found that excluding the NaNO3, increasing the amount of KMnO4, and performing the reaction in a 9:1 mixture of H2SO4/H3PO4 improves the efficiency of the oxidation process. This improved method provides a greater amount of hydrophilic oxidized graphene material as compared to Hummers’ method or Hummers’ method with additional KMnO4. Moreover, even though the GO produced by our method is more oxidized than that prepared by Hummers’ method, when both are reduced in the same chamber with hydrazine, chemically converted graphene (CCG) produced from this new method is equivalent in its electrical conductivity. In contrast to Hummers’ method, the new method does not generate toxic gas and the temperature is easily controlled. This improved synthesis of GO may be important for large-scale production of GO as well as the ...

Functionalization of Graphene: Covalent and Non-Covalent Approaches, Derivatives and Applications

Abstract: Approaches, Derivatives and Applications Vasilios Georgakilas,† Michal Otyepka,‡ Athanasios B. Bourlinos,‡ Vimlesh Chandra, Namdong Kim, K. Christian Kemp, Pavel Hobza,‡,§,⊥ Radek Zboril,*,‡ and Kwang S. Kim* †Institute of Materials Science, NCSR “Demokritos”, Ag. Paraskevi Attikis, 15310 Athens, Greece ‡Regional Centre of Advanced Technologies and Materials, Department of Physical Chemistry, Faculty of Science, Palacky University Olomouc, 17. listopadu 12, 771 46 Olomouc, Czech Republic Center for Superfunctional Materials, Department of Chemistry, Pohang University of Science and Technology, San 31, Hyojadong, Namgu, Pohang 790-784, Korea Institute of Organic Chemistry and Biochemistry, Academy of Sciences of the Czech Republic, v.v.i., Flemingovo naḿ. 2, 166 10 Prague 6, Czech Republic

Graphene-based semiconductor photocatalysts

Abstract: Graphene, a single layer of graphite, possesses a unique two-dimensional structure, high conductivity, superior electron mobility and extremely high specific surface area, and can be produced on a large scale at low cost. Thus, it has been regarded as an important component for making various functional composite materials. Especially, graphene-based semiconductor photocatalysts have attracted extensive attention because of their usefulness in environmental and energy applications. This critical review summarizes the recent progress in the design and fabrication of graphene-based semiconductor photocatalysts via various strategies including in situ growth, solution mixing, hydrothermal and/or solvothermal methods. Furthermore, the photocatalytic properties of the resulting graphene-based composite systems are also discussed in relation to the environmental and energy applications such as photocatalytic degradation of pollutants, photocatalytic hydrogen generation and photocatalytic disinfection. This critical review ends with a summary and some perspectives on the challenges and new directions in this emerging area of research (158 references).

Graphene-Based Materials: Synthesis, Characterization, Properties, and Applications

Abstract: Graphene, a two-dimensional, single-layer sheet of sp(2) hybridized carbon atoms, has attracted tremendous attention and research interest, owing to its exceptional physical properties, such as high electronic conductivity, good thermal stability, and excellent mechanical strength. Other forms of graphene-related materials, including graphene oxide, reduced graphene oxide, and exfoliated graphite, have been reliably produced in large scale. The promising properties together with the ease of processibility and functionalization make graphene-based materials ideal candidates for incorporation into a variety of functional materials. Importantly, graphene and its derivatives have been explored in a wide range of applications, such as electronic and photonic devices, clean energy, and sensors. In this review, after a general introduction to graphene and its derivatives, the synthesis, characterization, properties, and applications of graphene-based materials are discussed.