Shiichiro Teranishi

Bio: Shiichiro Teranishi is an academic researcher from Osaka University. The author has contributed to research in topics: Catalysis & Palladium. The author has an hindex of 25, co-authored 62 publications receiving 1890 citations.

Aromatic substitution of olefins. VI. Arylation of olefins with palladium(II) acetate.

Abstract: Olefins react with benzene derivatives to produce aryl-substituted olefins uia direct substitution of the aromatic compound for hydrogen on the double bond of the olefin in the presence of palladium salts and reduced palladium metal. The reaction may be made catalytic with respect to the palladium salts by using cupric acetate or silver acetate, and air as reoxidants. The reaction provides an extremely convenient method for the synthesis of a wide variety of olefinic compounds. xtensive studies on reactions of olefins in the presE ence of transition metal compounds have been carried out. Much less is known about arylation of olefins with transition metal compounds. Most recently, Heck described interesting arylation reactions of olefins with arylating agents such as arylmercuric halides in the presence of group VI11 metal salts, and showed that palladium salts are the most generally useful, with rhodium and ruthenium salts next best. We have reported a novel method of synthesizing stilbene derivatives by substitution of aromatic compounds for hydrogen on the double bond of the styrenepalladium chloride ~ o m p l e x . ~ In the course of our work, palladium acetate was found to be the most effective for the direct arylation of olefins with aromatic compounds in the presence of acetic acid. The present paper reports a study of substitution reaction of olefins with benzene derivatives by means of palladium salts, especially palladium acetate. A preliminary communication of a portion of this work has been given.4 ( I ) On leave of absence from Ube Industries, Ltd., Ube, Japan. (2) (a) R. F. Heck, J . Amer. Chem. Soc., 90, 5518 (1968); (b) R .F. Heck, ibid., 90, 5526 (1968); (c) R. F. Heck, ibid., 90, 5531 (1968); (d) R. F. Heck, ibid., 90, 5535 (1968); (e) R. F. Heck, ibid., 90, 5542 (1968). (3) (a) I. Moritani and Y. Fujiwara, Tefrahedron L e f f . , 1119 (1967); (b) Y . Fujiwara, I. Moritani, and M. Matsuda, Tetrahedron, 24, 4819 (1968). (4) Y. Fujiwara, I. Moritani, M. Matsuda, and S . Teranishi, Tetrahedron Lett., 633 (1968). Results and Discussion In previous papers3 we described our initial work on the reactions of the styrene-palladium(I1) chloride complex with benzene derivatives to give stilbenes. It was noted that for this arylation on a P-carbon atom of styrene, the presence of a carboxylic acid such as acetic is essential because the reactants form a homogeneous solution and the reaction proceeds best in this solvent. Further, it was found that when sodium acetate was added, the yield was greatly increased. Palladium(I1) acetate has been found to be the most generally useful, with palladium(I1) chloride-sodium acetate next best for the direct arylation of olefins with benzene derivatives. The aromatic substitution of olefins takes place in homogeneous solutions of reactant olefin and palladium(I1) acetate (equal mole equivalents to olefin) in a solution of the aromatic compound (large excess) and acetic acid. The solution is stirred in the presence of air for a few minutes to several hours (8 hr usually), to give from 10% to ca. 90% yield of arylated products, with reduced metallic palladium and a very small amount of acetates. With unsymmetrical olefins, the aryl group generally adds predominantly to the less substituted carbon atom of the double bond because of steric hindrance of the substituents. This is consistent with that observed in the Heck arylation.2 Although cis and trans mixtures are formed, no mixtures resulting from arylation in both directions to unsymmetrical olefins have been found. Increasing substitution on the olefinic carbons decreases the reactivity of the olefin in the palladium acetate arylation reaction. For example, the reaction of triphenylethylene with benzene and a palladium acetate catalyst gave tetraphenylethylene in low yield (13 %),5 while styrene reacts with benzene to afford trans-stilbene in almost quantitative yield. Results are given in Table I. (5) Yields of arylation products given in this paper are based on the amount of palladium salt utilized. Journal of the American Chemical Soc ie t y J 91:25 December 3, 1969

Carboxylate-assisted transition-metal-catalyzed C-H bond functionalizations: mechanism and scope.

Abstract: The site-selective formation of carbon-carbon bonds through direct functionalizations of otherwise unreactive carbon-hydrogen bonds constitutes an economically attractive strategy for an overall streamlining of sustainable syntheses. In recent decades, intensive research efforts have led to the development of various reaction conditions for challenging C-H bond functionalizations, among which transition-metal-catalyzed transformations arguably constitute thus far the most valuable tool. For instance, the use of inter alia palladium, ruthenium, rhodium, copper, or iron complexes set the stage for chemo-, site-, diastereo-, and/or enantioselective C-H bond functionalizations. Key to success was generally a detailed mechanistic understanding of the elementary C-H bond metalation step, which depending on the nature of the metal fragment can proceed via several distinct reaction pathways. Traditionally, three different modes of action were primarily considered for CH bond metalations, namely, (i) oxidative addition with electronrich late transition metals, (ii) σ-bond metathesis with early transition metals, and (iii) electrophilic activation with electrondeficient late transition metals (Scheme 1). However, more recent mechanistic studies indicated the existence of a continuum of electrophilic, ambiphilic, and nucleophilic interactions. Within this continuum, detailed experimental and computational analysis provided strong evidence for novel C-H bond metalationmechanisms relying on the assistance of a bifunctional ligand bearing an additional Lewis-basic heteroatom, such as that found in (heteroatom-substituted) secondary phosphine oxides or most prominently carboxylates (Scheme 1, iv). This novel insight into the nature of stoichiometric metalations has served as stimulus for the development of novel transformations based on cocatalytic amounts of carboxylates, which significantly broadened the scope of C-H bond functionalizations in recent years, with most remarkable progress being made in palladiumor ruthenium-catalyzed direct arylations and direct alkylations. These carboxylate-assisted C-H bond transformations were mostly proposed to proceed via a mechanism in which metalation takes place via a concerted base-assisted deprotonation. To mechanistically differentiate these intramolecular metalations new acronyms have recently been introduced into the literature, such as CMD (concerted metalationdeprotonation), IES (internal electrophilic substitution), or AMLA (ambiphilic metal ligand activation), which describe related mechanisms and will be used below where appropriate. This review summarizes the development and scope of carboxylates as cocatalysts in transition-metal-catalyzed C-H functionalizations until autumn 2010. Moreover, experimental and computational studies on stoichiometric metalation reactions being of relevance to the mechanism of these catalytic processes are discussed as well. Mechanistically related C-H bond cleavage reactions with ruthenium or iridium complexes bearing monodentate ligands are, however, only covered with respect to their working mode, and transformations with stoichiometric amounts of simple acetate bases are solely included when their mechanism was suggested to proceed by acetate-assisted metalation.

Activation of c-h bonds by metal complexes

Abstract: ion. The oxidative addition mechanism was originally proposed22i because of the lack of a strong rate dependence on polar factors and on the acidity of the medium. Later, however, the electrophilic substitution mechanism also was proposed. Recently, the oxidative addition mechanism was confirmed by investigations into the decomposition and protonolysis of alkylplatinum complexes, which are the reverse of alkane activation. There are two routes which operate in the decomposition of the dimethylplatinum(IV) complex Cs2Pt(CH3)2Cl4. The first route leads to chloride-induced reductive elimination and produces methyl chloride and methane. The second route leads to the formation of ethane. There is strong kinetic evidence that the ethane is produced by the decomposition of an ethylhydridoplatinum(IV) complex formed from the initial dimethylplatinum(IV) complex. In D2O-DCl, the ethane which is formed contains several D atoms and has practically the same multiple exchange parameter and distribution as does an ethane which has undergone platinum(II)-catalyzed H-D exchange with D2O. Moreover, ethyl chloride is formed competitively with H-D exchange in the presence of platinum(IV). From the principle of microscopic reversibility it follows that the same ethylhydridoplatinum(IV) complex is the intermediate in the reaction of ethane with platinum(II). Important results were obtained by Labinger and Bercaw62c in the investigation of the protonolysis mechanism of several alkylplatinum(II) complexes at low temperatures. These reactions are important because they could model the microscopic reverse of C-H activation by platinum(II) complexes. Alkylhydridoplatinum(IV) complexes were observed as intermediates in certain cases, such as when the complex (tmeda)Pt(CH2Ph)Cl or (tmeda)PtMe2 (tmeda ) N,N,N′,N′-tetramethylenediamine) was treated with HCl in CD2Cl2 or CD3OD, respectively. In some cases H-D exchange took place between the methyl groups on platinum and the, CD3OD prior to methane loss. On the basis of the kinetic results, a common mechanism was proposed to operate in all the reactions: (1) protonation of Pt(II) to generate an alkylhydridoplatinum(IV) intermediate, (2) dissociation of solvent or chloride to generate a cationic, fivecoordinate platinum(IV) species, (3) reductive C-H bond formation, producing a platinum(II) alkane σ-complex, and (4) loss of the alkane either through an associative or dissociative substitution pathway. These results implicate the presence of both alkane σ-complexes and alkylhydridoplatinum(IV) complexes as intermediates in the Pt(II)-induced C-H activation reactions. Thus, the first step in the alkane activation reaction is formation of a σ-complex with the alkane, which then undergoes oxidative addition to produce an alkylhydrido complex. Reversible interconversion of these intermediates, together with reversible deprotonation of the alkylhydridoplatinum(IV) complexes, leads to multiple H-D exchange

Transition-metal-catalyzed direct arylation of (hetero)arenes by C-H bond cleavage.

Abstract: The area of transition-metal-catalyzed direct arylation through cleavage of CH bonds has undergone rapid development in recent years, and is becoming an increasingly viable alternative to traditional cross-coupling reactions with organometallic reagents In particular, palladium and ruthenium catalysts have been described that enable the direct arylation of (hetero)arenes with challenging coupling partners—including electrophilic aryl chlorides and tosylates as well as simple arenes in cross-dehydrogenative arylations Furthermore, less expensive copper, iron, and nickel complexes were recently shown to be effective for economically attractive direct arylations

Weak coordination as a powerful means for developing broadly useful C-H functionalization reactions.

Abstract: Reactions that convert carbon–hydrogen (C–H) bonds into carbon–carbon (C–C) or carbon–heteroatom (C–Y) bonds are attractive tools for organic chemists, potentially expediting the synthesis of target molecules through new disconnections in retrosynthetic analysis. Despite extensive inorganic and organometallic study of the insertion of homogeneous metal species into unactivated C–H bonds, practical applications of this technology in organic chemistry are still rare. Only in the past decade have metal-catalyzed C–H functionalization reactions become more widely utilized in organic synthesis.Research in the area of homogeneous transition metal–catalyzed C–H functionalization can be broadly grouped into two subfields. They reflect different approaches and goals and thus have different challenges and opportunities. One approach involves reactions of completely unfunctionalized aromatic and aliphatic hydrocarbons, which we refer to as “first functionalization”. Here the substrates are nonpolar and hydrophobic a...

Palladium-Catalyzed Cross-Coupling: A Historical Contextual Perspective to the 2010 Nobel Prize

Abstract: In 2010, Richard Heck, Ei-ichi Negishi, and Akira Suzuki joined the prestigious circle of Nobel Laureate chemists for their roles in discovering and developing highly practical methodologies for C-C bond construction. From their original contributions in the early 1970s the landscape of the strategies and methods of organic synthesis irreversibly changed for the modern chemist, both in academia and in industry. In this Review, we attempt to trace the historical origin of these powerful reactions, and outline the developments from the seminal discoveries leading to their eminent position as appreciated and applied today.