Shin-Shem Pei

Bio: Shin-Shem Pei is an academic researcher from Center for Advanced Materials. The author has contributed to research in topics: Quantum well & Semiconductor laser theory. The author has an hindex of 33, co-authored 107 publications receiving 6689 citations. Previous affiliations of Shin-Shem Pei include University of Houston & AT&T.

Control and characterization of individual grains and grain boundaries in graphene grown by chemical vapour deposition

Abstract: Chemical vapour deposition is a promising route for large-scale graphene growth. It is now shown that—through the use of seeds—high-quality, large, single-crystal domains can be grown on a patterned arrangement, and can be used to carefully study the transport across grain boundaries.

Control and Characterization of Individual Grains and Grain Boundaries in Graphene Grown by Chemical Vapor Deposition

Abstract: The strong interest in graphene has motivated the scalable production of high quality graphene and graphene devices. Since large-scale graphene films synthesized to date are typically polycrystalline, it is important to characterize and control grain boundaries, generally believed to degrade graphene quality. Here we study single-crystal graphene grains synthesized by ambient CVD on polycrystalline Cu, and show how individual boundaries between coalescing grains affect graphene's electronic properties. The graphene grains show no definite epitaxial relationship with the Cu substrate, and can cross Cu grain boundaries. The edges of these grains are found to be predominantly parallel to zigzag directions. We show that grain boundaries give a significant Raman "D" peak, impede electrical transport, and induce prominent weak localization indicative of intervalley scattering in graphene. Finally, we demonstrate an approach using pre-patterned growth seeds to control graphene nucleation, opening a route towards scalable fabrication of single-crystal graphene devices without grain boundaries.

Graphene segregated on Ni surfaces and transferred to insulators

Abstract: We report an approach to synthesize high quality graphene by surface segregation and substrate transfer. Graphene was segregated from Ni surface under the ambient pressure by dissolving carbon in Ni at high temperatures followed by cooling down with various rates. Different cooling rates led to different segregation behaviors, strongly affecting the thickness and quality of the graphene films. Electron microscopy and Raman spectroscopy indicated that the graphene films synthesized with medium cooling rates have high quality crystalline structure and well-controlled thicknesses. The graphene films were transferred to insulating substrates by wet etching and found to maintain their high quality.

Wafer-scale synthesis of graphene by chemical vapor deposition and its application in hydrogen sensing

Abstract: Graphene with a large area was synthesized on Cu foils by chemical vapor deposition under ambient pressure. A 4 �� × 4 �� graphene film was transferred onto a 6 �� Si wafer with a thermally grown oxide film. Raman mapping indicates monolayer graphene dominates the transferred graphene film. Gas sensors were fabricated on a 4 mm × 3 mm size graphene film with a 1 nm palladium film deposited for hydrogen detection. Hydrogen in air with concentrations in 0.0025-1% (25-10,000 ppm) was used to test graphene- based gas sensors. The gas sensors based on palladium-decorated graphene films show high sensitivity, fast response and recovery, and can be used with multiple cycles. The mechanism of hydrogen detection is also discussed.

Electronic transport in chemical vapor deposited graphene synthesized on Cu: Quantum Hall effect and weak localization

Abstract: We report on electronic properties of graphene synthesized by chemical vapor deposition (CVD) on copper then transferred to SiO2/Si. Wafer-scale (up to 4 in.) graphene films have been synthesized, consisting dominantly of monolayer graphene as indicated by spectroscopic Raman mapping. Low temperature transport measurements are performed on microdevices fabricated from such CVD graphene, displaying ambipolar field effect (with on/off ratio ∼5 and carrier mobilities up to ∼3000 cm2/V s) and “half-integer” quantum Hall effect, a hall-mark of intrinsic electronic properties of monolayer graphene. We also observe weak localization and extract information about phase coherence and scattering of carriers.

Large-Area Synthesis of High-Quality and Uniform Graphene Films on Copper Foils

Abstract: Graphene has been attracting great interest because of its distinctive band structure and physical properties. Today, graphene is limited to small sizes because it is produced mostly by exfoliating graphite. We grew large-area graphene films of the order of centimeters on copper substrates by chemical vapor deposition using methane. The films are predominantly single-layer graphene, with a small percentage (less than 5%) of the area having few layers, and are continuous across copper surface steps and grain boundaries. The low solubility of carbon in copper appears to help make this growth process self-limiting. We also developed graphene film transfer processes to arbitrary substrates, and dual-gated field-effect transistors fabricated on silicon/silicon dioxide substrates showed electron mobilities as high as 4050 square centimeters per volt per second at room temperature.

Large-scale pattern growth of graphene films for stretchable transparent electrodes

Abstract: Problems associated with large-scale pattern growth of graphene constitute one of the main obstacles to using this material in device applications. Recently, macroscopic-scale graphene films were prepared by two-dimensional assembly of graphene sheets chemically derived from graphite crystals and graphene oxides. However, the sheet resistance of these films was found to be much larger than theoretically expected values. Here we report the direct synthesis of large-scale graphene films using chemical vapour deposition on thin nickel layers, and present two different methods of patterning the films and transferring them to arbitrary substrates. The transferred graphene films show very low sheet resistance of approximately 280 Omega per square, with approximately 80 per cent optical transparency. At low temperatures, the monolayers transferred to silicon dioxide substrates show electron mobility greater than 3,700 cm(2) V(-1) s(-1) and exhibit the half-integer quantum Hall effect, implying that the quality of graphene grown by chemical vapour deposition is as high as mechanically cleaved graphene. Employing the outstanding mechanical properties of graphene, we also demonstrate the macroscopic use of these highly conducting and transparent electrodes in flexible, stretchable, foldable electronics.

Graphene and Graphene Oxide: Synthesis, Properties, and Applications

Abstract: There is intense interest in graphene in fields such as physics, chemistry, and materials science, among others. Interest in graphene's exceptional physical properties, chemical tunability, and potential for applications has generated thousands of publications and an accelerating pace of research, making review of such research timely. Here is an overview of the synthesis, properties, and applications of graphene and related materials (primarily, graphite oxide and its colloidal suspensions and materials made from them), from a materials science perspective.

Roll-to-roll production of 30-inch graphene films for transparent electrodes

Abstract: The outstanding electrical, mechanical and chemical properties of graphene make it attractive for applications in flexible electronics. However, efforts to make transparent conducting films from graphene have been hampered by the lack of efficient methods for the synthesis, transfer and doping of graphene at the scale and quality required for applications. Here, we report the roll-to-roll production and wet-chemical doping of predominantly monolayer 30-inch graphene films grown by chemical vapour deposition onto flexible copper substrates. The films have sheet resistances as low as approximately 125 ohms square(-1) with 97.4% optical transmittance, and exhibit the half-integer quantum Hall effect, indicating their high quality. We further use layer-by-layer stacking to fabricate a doped four-layer film and measure its sheet resistance at values as low as approximately 30 ohms square(-1) at approximately 90% transparency, which is superior to commercial transparent electrodes such as indium tin oxides. Graphene electrodes were incorporated into a fully functional touch-screen panel device capable of withstanding high strain.

Band parameters for III–V compound semiconductors and their alloys

Abstract: We present a comprehensive, up-to-date compilation of band parameters for the technologically important III–V zinc blende and wurtzite compound semiconductors: GaAs, GaSb, GaP, GaN, AlAs, AlSb, AlP, AlN, InAs, InSb, InP, and InN, along with their ternary and quaternary alloys. Based on a review of the existing literature, complete and consistent parameter sets are given for all materials. Emphasizing the quantities required for band structure calculations, we tabulate the direct and indirect energy gaps, spin-orbit, and crystal-field splittings, alloy bowing parameters, effective masses for electrons, heavy, light, and split-off holes, Luttinger parameters, interband momentum matrix elements, and deformation potentials, including temperature and alloy-composition dependences where available. Heterostructure band offsets are also given, on an absolute scale that allows any material to be aligned relative to any other.